Vindictus Consolite Bot Information & Personal Key Binds

[MrJunketyJunk]

This is awesome, I've never botted b4 but I think with the stuff you put here, I finally can. Will give it a try l8r thanks

[jasonjk1]

Dude! keypad 9 is not binned to any command, i tried hitting it a buch of times but the bot didn't start, then I realized and bind it to the btt.txt

[krisrandomhero]

Yo, my bad, I forgot to add that to text file when I uploaded it. -Facepalm.- Yeah, well, you had the common sense to figure that out, so I commend you for that! .

[[MPGH]Nico]

Don't post that it's detected here.

[AaronKay14]

Can anyone help with this problem , when I run the bot on the rocheste maps like the contract, give a beggar a coin after about 5 runs vindictus launcher stops working how can I fix this? Does it have something to do with the timescale?

[krisrandomhero]

The bot isn't intended for Rocheste maps. I can't help you with that, sorry.

[gdrthuy]

Can anyone help with this problem , when I run the bot on the rocheste maps like the contract, give a beggar a coin after about 5 runs vindictus launcher stops working how can I fix this? Does it have something to do with the timescale?

You need setpos commands there.
Example Ingkara
Reason for crash is
a_delayed 33 cc_change_figure_height 500
a_delayed 35 scaleform_fade_in 0.1
Server gets unacceptable parameters from client, such as view angles.

[AaronKay14]

Oh thanks, I clicked thanks btw, but I would like to know where and how to set a setpos for it?

[gdrthuy]

Oh thanks, I clicked thanks btw, but I would like to know where and how to set a setpos for it?

Here is link to clear and simple guide on setpos, for more info check @xabbis

Well first you need to use "sv_cheats 2", then use "cl_showpos 1" which shows current position, angle, and velocity.
Once you get the position you want, do "setpos x y z".
Note: make sure you dont miss any negative numbers when doing setpos.

and here simple script with setpos practical use on ingkara by @cosmin332

So first make a file named runbot.txt with the following commands

a_boat_no_intro 1
alias callnext "a_exec callnext.txt"
alias done "alias callnext cc_system_message GameOver!"
callnext


Then make a file named callnext.txt with the following :
a_delayed 5 "a_boat_start;cc_system_message Launching..."
a_delayed 8 "changelevel 2;cc_system_message skip1"
a_delayed 12 "changelevel 2;cc_system_message skip2"
a_delayed 14 "changelevel 2;cc_system_message skip3"
a_delayed 22 "changelevel 2;cc_system_message skip4"
a_delayed 27 "a_nukeall;cc_system_message killemAll!"
a_delayed 29 "cc_change_figure_height 1500;cc_system_message supersize!"
a_delayed 30 "cc_change_figure_height .1;cc_system_message minime!"
a_delayed 32 "cc_change_figure_height 1500;cc_system_message supersize!"
a_delayed 34 "cc_change_figure_height .1;cc_system_message minime!"
a_delayed 35 setpos 635.63 -401.24 323.02
a_delayed 36 "scaleform_fade_in 0.1;cc_system_message scaleform_fade_in:whatever"
a_delayed 98 "a_boat_replay;cc_system_message replaying..."
a_delayed 113 callnext

When u are in the boat type in console or bind a_exec runbot.txt
Done enjoy it and adjust the timers at your needs.(i have a slower pc)
Note: Sometimes when u pick oath of onor WArriors Challenge might crash u after a few runs.

[AaronKay14]

Thank you very much.

[knucklenuts1]

Dude! keypad 9 is not binned to any command, i tried hitting it a buch of times but the bot didn't start, then I realized and bind it to the btt.txt

UGH!!! I am having this same problem where I hit keypd 9 and the bot not starting from boat. However, I did bind the key to the btt.txt file, but it still doesn't start. Can someone tell this doucher what I'm doing wrong? I included the binds I'm using and what is in my btt.txt file. All the other binds seem to be working correctly except starting the dungeon.

My binds are as follows:

bind "0" "a_var_is_quest_ranking_shown 0"
bind "7" "a_transform"
bind "Del" "a_nuke"
bind "Ins" "a_nukeall"

bind "HOME" "a_exec col.txt"
bind "END" "a_exec roc.txt"

bind "i" "a_exec spr.txt"
bind "o" "a_exec bmb.txt"
bind "k" "a_exec mnn.txt"
bind "8" "a_exec stk.txt"
bind "9" "a_exec jav.txt"
bind "q" "a_exec fil.txt"
bind "\" "a_exec dif.txt"

bind "PGUP" "a_exec mai.txt"
bind "PGDN" "a_exec shp.txt"

bind "KP_DOWNARROW" "a_exec spd.txt"
bind "KP_LEFTARROW" "a_exec sml.txt"
bind "KP_5" "a_exec nrm.txt"
bind "KP_RIGHTARROW" "a_exec big.txt"
bind "KP_INS" "a_exec skp.txt"
bind "KP_9" "a_exec btt.txt"
-----------------------------------------------------

btt.txt Contents:

a_delayed 1 a_boat_no_intro "1"
a_delayed 3 a_boat_start
a_delayed 10 changelevel 2
a_delayed 15 changelevel 2
a_delayed 20 changelevel 2
a_delayed 24 cc_change_figure_height 500
a_delayed 25 scaleform_fade_in 0.1
a_delayed 27 a_nuke
a_delayed 86 a_if a_var_is_quest_ranking_shown == "1" "a_boat_replay"
a_delayed 92 a_exec btt.txt

[AaronKay14]

UGH!!! I am having this same problem where I hit keypd 9 and the bot not starting from boat. However, I did bind the key to the btt.txt file, but it still doesn't start. Can someone tell this doucher what I'm doing wrong? I included the binds I'm using and what is in my btt.txt file. All the other binds seem to be working correctly except starting the dungeon.

My binds are as follows:

bind "0" "a_var_is_quest_ranking_shown 0"
bind "7" "a_transform"
bind "Del" "a_nuke"
bind "Ins" "a_nukeall"

bind "HOME" "a_exec col.txt"
bind "END" "a_exec roc.txt"

bind "i" "a_exec spr.txt"
bind "o" "a_exec bmb.txt"
bind "k" "a_exec mnn.txt"
bind "8" "a_exec stk.txt"
bind "9" "a_exec jav.txt"
bind "q" "a_exec fil.txt"
bind "\" "a_exec dif.txt"

bind "PGUP" "a_exec mai.txt"
bind "PGDN" "a_exec shp.txt"

bind "KP_DOWNARROW" "a_exec spd.txt"
bind "KP_LEFTARROW" "a_exec sml.txt"
bind "KP_5" "a_exec nrm.txt"
bind "KP_RIGHTARROW" "a_exec big.txt"
bind "KP_INS" "a_exec skp.txt"
bind "KP_9" "a_exec btt.txt"
-----------------------------------------------------

btt.txt Contents:

a_delayed 1 a_boat_no_intro "1"
a_delayed 3 a_boat_start
a_delayed 10 changelevel 2
a_delayed 15 changelevel 2
a_delayed 20 changelevel 2
a_delayed 24 cc_change_figure_height 500
a_delayed 25 scaleform_fade_in 0.1
a_delayed 27 a_nuke
a_delayed 86 a_if a_var_is_quest_ranking_shown == "1" "a_boat_replay"
a_delayed 92 a_exec btt.txt

If you are on laptop there is no keypad just the number line, just bind it to bind "9" "a_exec btt.txt" and it should work( that will sub for Jav though so you have to set that to something different or nothing if you dont intend to use those functions).

[knucklenuts1]

I dropped a Thank You for your response...thanks a bunch. However, I'm not using a laptop. I tried binding to another key...still didnt work. Have any other suggestions?

Thanks again

[AaronKay14]

If you dont mind the extra work to the start the loop you could aslo just type in the console when you are on the boat type "a_exec btt.txt" without the quotes, most of the commands in the c_cfg folder can be entered via console manually. To stop the bot just drag the c_cfg folder out of the en-us folder while the bot is idle , if you do it while a map is loading you could experience some problems .. like seeing the rocheste magician in the dorm with dolores.. Give it a try though, its not that bad.

[wolb]

I dropped a Thank You for your response...thanks a bunch. However, I'm not using a laptop. I tried binding to another key...still didnt work. Have any other suggestions?

Thanks again

Do you have any binding working at all? If you don't, that's a completely different question.