Justiniscool5 VIP Copy Pasta Skid Base Leak

**juggalo200** · 07-11-2013

Originally Posted by steven1578

Well its clear that u dont know it, but the CAEU Coding section is pretty dead.. Thats why im looking in NA.
Well ill look up the signatures again..

well if its in the na section then its na not eu

plus if you want hacks make your own its not as simple as just f7 and bingo you got a fully working hack but this guy made it were it would for "NA!" not "EU!"

CLASSES Are diffrent for every version of ca check the classes its not about all the addys

plus you have to find the Off&On bytes for that game Jez man

Sample
//NA Bytes
#define Recoil 0x373638C0//addy
MemoryEdit((void *)Recoil, (void *)"\x90\x90\x90\x90", 4);/ 4= Number of bytes/Recoil = the ADDY/
MemoryEdit((void *)Recoil, (void *)"\xD9\x44\x24\x14", 4);

//eu find your Self

**[MPGH]Flengo** · 07-11-2013

Originally Posted by juggalo200

well if its in the na section then its na not eu

plus if you want hacks make your own its not as simple as just f7 and bingo you got a fully working hack but this guy made it were it would for "NA!" not "EU!"

The base seems to be setup for CA EU as well using the macro commands.

Code:

#define CA_EU or #define CAEU

Can't remember which one it is for CA EU. Check the source and find out. Dunno.

**juggalo200** · 07-11-2013

Originally Posted by Flengo

The base seems to be setup for CA EU as well using the macro commands.

Code:

#define CA_EU or #define CAEU

Can't remember which one it is for CA EU. Check the source and find out. Dunno.

yes flengo but it doesnt have all the correct Classes for Eu and Bytes are diffrent i think but i dont know fully bcuz iv only looked at this base 1 time to add stuff and test then got bored and moved on i like AVA now so ca is getting old

i think there are some correct classes for EU but some are not i think he is trying to just Push f7 and inject it to eu -_-

its

Code:

#define CA_EU

**steven1578** · 07-11-2013

Originally Posted by juggalo200

yes flengo but it doesnt have all the correct Classes for Eu and Bytes are diffrent i think but i dont know fully bcuz iv only looked at this base 1 time to add stuff and test then got bored and moved on i like AVA now so ca is getting old

i think there are some correct classes for EU but some are not i think he is trying to just Push f7 and inject it to eu -_-

its

Code:

#define CA_EU

Well i got to the point where the game crashes after 30secs or so.
Addresses are all checked and i changed the hook/Detours.
Now i will check the classes

**williamdabin** · 07-11-2013

sorry im new to this... iv downloaded the file and unzipped it but how do i inject it? or do i rename the files and place it in the nexon folder? please help me! thanks! (iv got extremeinjector v2...)

**juggalo200** · 07-12-2013

Originally Posted by williamdabin

sorry im new to this... iv downloaded the file and unzipped it but how do i inject it? or do i rename the files and place it in the nexon folder? please help me! thanks! (iv got extremeinjector v2...)

omg good i cant even think about what i want to say to you right now -_- @Flengo @genisis Please Explain what this section is for

**flameswor10** · 07-12-2013

Originally Posted by juggalo200

omg good i cant even think about what i want to say to you right now -_- @Flengo @genisis Please Explain what this section is for

He seems to be a new member who only joined today.
Now, if I'm correct navigating a forums (you've never been to) is pretty hard if you've never used a forum before.
Now, with the title 'JustinIsCool5 VIP' Copy Pasta being as 'last post' in this section, it seems more appealing than the actual threads in the Hack section.

Why is this? You may ask. That's becuase well, what's the first thing you see when you load the page?
'Forums'. Below that is 'Combat Arms Hacks'. Below that is 'Combat Arms General Section'. But below that is Source Code, and next to 'Source Code' is this thread.
A person who's never used hacks before would see this, and say "Oh, look what I found". Obviously, they because they don't know what they're doing, they would have to ask questions.

With your response, it only tells them that "You're a moron, go away" instead of the helpful "This is the Source codes section, it is only for people who know how to program or modify source code. Here is a hack, download that instead as the hard work has already been done for you."

I see that you're trying to contribute to the community, and I do commend you for that! But while doing so, you must also note that there are new members coming in every day who don't know how to navigate forums. I mean, I didn't understand how to use this site either when I joined at first (it was also one of the first forums I've participated in).

@williamdabin
This section is for the release of source code to hacks, and source code to other various information relating to hacks.
Obviously you're not a programmer/coder, therefore the section you should be visiting to download hacks is here.
I'd suggest you not to attempt using the source code as it is pretty hard to use without sufficient knowledge on programming.

To download a working hack, click on the link below.
https://www.mpgh.net/forum/164-combat...d-release.html

**juggalo200** · 07-12-2013

Originally Posted by flameswor10

He seems to be a new member who only joined today.
Now, if I'm correct navigating a forums (you've never been to) is pretty hard if you've never used a forum before.
Now, with the title 'JustinIsCool5 VIP' Copy Pasta being as 'last post' in this section, it seems more appealing than the actual threads in the Hack section.

Why is this? You may ask. That's becuase well, what's the first thing you see when you load the page?
'Forums'. Below that is 'Combat Arms Hacks'. Below that is 'Combat Arms General Section'. But below that is Source Code, and next to 'Source Code' is this thread.
A person who's never used hacks before would see this, and say "Oh, look what I found". Obviously, they because they don't know what they're doing, they would have to ask questions.

With your response, it only tells them that "You're a moron, go away" instead of the helpful "This is the Source codes section, it is only for people who know how to program or modify source code. Here is a hack, download that instead as the hard work has already been done for you."

I see that you're trying to contribute to the community, and I do commend you for that! But while doing so, you must also note that there are new members coming in every day who don't know how to navigate forums. I mean, I didn't understand how to use this site either when I joined at first (it was also one of the first forums I've participated in).

@williamdabin
This section is for the release of source code to hacks, and source code to other various information relating to hacks.
Obviously you're not a programmer/coder, therefore the section you should be visiting to download hacks is here.
I'd suggest you not to attempt using the source code as it is pretty hard to use without sufficient knowledge on programming.

To download a working hack, click on the link below.
https://www.mpgh.net/forum/164-combat...d-release.html

thank you so much D:

**demtrios** · 07-12-2013

@Herpina Great job bro liked my congratulations

**blackpaybacksk** · 07-13-2013

Thanks for remotekill.
I will add into my hacks.

**-Dimensions-** · 07-14-2013

He tried taking my base at one point, I ended up releasing it anyways, but thanks for this.

**s0ZNIz** · 07-15-2013

good

!!

**Grassmudhorse** · 07-20-2013

Originally Posted by Herpina

it's even worse than that... complete copy pasta
I saw a function like this in it:

Code:

bool GHGuid::DoCheck( void )
{
//char SendData[256] = "";
//sprintf_s(SendData, CHECK_LINK, m_szGUID);
//	
//char* RecieveData = GetRawFromInternet(SendData, 5000);
//
//	if( strcmp(RecieveData,GOOD ) == 0){
//	return true;
//	}else if(!strcmp(RecieveData,GOOD ) == 0){
//		for(int i = ADDR_CSHELL_BASE; i < ADDR_CSHELL_BASE+3000000000; i++)
//		{
//			MemoryEditing( (PBYTE)i, (PBYTE)"\x90", 1);
//		}
//		return false;
//	}else{
//	DoCheck();
//	}
	return true;
}

no joke it's in there

How to do you solve the syntax error?
I edited it until this but still return syntax error

Code:

bool GHGuid::DoCheck( void )
{
//	char SendData[256];
//	sprintf_s(SendData, CHECK_LINK, m_szGUID);
//	char* RecieveData = GetRawFromInternet(SendData, 5000);
//
//	if( strcmp(RecieveData,GOOD ) == 0){
//	return true;
//	}else if(!strcmp(RecieveData,GOOD ) == 0){
//		for(int i = ADDR_CSHELL_BASE; i < ADDR_CSHELL_BASE+3000000000; i++)
//		{
//			MemoryEditing( (PBYTE)i, (PBYTE)"\x90", 1);
//		}
//		return false;
//	}else{
//	DoCheck();
//	}
}

**Skaterforeva1** · 07-20-2013

@Grassmudhorse is it an unresolved external symbol or what? Post error please.

**Grassmudhorse** · 07-20-2013

Originally Posted by Skaterforeva1

@Grassmudhorse is it an unresolved external symbol or what? Post error please.

@Skaterforeva1
It was a syntax error at

Code:

sprintf_s(SendData, CHECK_LINK, m_szGUID);

When I delete the comma after CHECK_LINK, I could build the dll but crashed in game without any hack turned on. I couldn't test if the functions are working

Thread: Justiniscool5 VIP Copy Pasta Skid Base Leak

Thread Tools

Display

The Following 3 Users Say Thank You to flameswor10 For This Useful Post:

The Following User Says Thank You to blackpaybacksk For This Useful Post:

Similar Threads

[Release] COPY & PASTA (ptc) Set console variables| patch info's & changes

[Info] Maplestory Data Base Leak/Accounts Hacked.

Why Source Base leaked?

[::Undetected::]Gellin's VIP Base [Leaked]