Regularly updated norecoil+rapidfire and various macros for A4Tech Mouse

[Yellow 13]

Hi Yellow, do you have time to post a guide to let us make our macro? Just a basic guide, the post could be useful and interesting for a lot of people and maybe could be a sticky thread

Thank You

My mouse (A4Tech XL-760 and A4Tech V5 Activated).

1. Activate brain
2. Use hand to input macro and make one

[Matt-One]

1. Activate brain
2. Use hand to input macro and make one

I made some macros with oscar for my old mouse,(i'm not really a newbie) but since now i have the new bloody, i'd like to have some advice in order to create a better macro (also) more faster of my method, it's a bit boring to enter and exit each time the game, I thought you had some better advice... Some specific calculation to get the most out of your macro or other...

Anyway Thanks and sorry for my english

[Yellow 13]

I made some macros with oscar for my old mouse,(i'm not really a newbie) but since now i have the new bloody, i'd like to have some advice in order to create a better macro (also) more faster of my method, it's a bit boring to enter and exit each time the game, I thought you had some better advice... Some specific calculation to get the most out of your macro or other...

Anyway Thanks and sorry for my english

Macro
-Correction timing (ROF)
-FSM/recoil/recoil decrease per sec (ballistic correction intensity, looping and non looping correction)
-Compensation => after recoil pull or directly after fire
-Windows value/DPi/bf3 sens
-Burst weapon => per click FSM+recoil decrease/s

tl;dr read the manual


also, click "test" to temporarily write a macro to N/button4

[Matt-One]

Macro
-Correction timing (ROF)
-FSM/recoil/recoil decrease per sec (ballistic correction intensity, looping and non looping correction)
-Compensation => after recoil pull or directly after fire
-Windows value/DPi/bf3 sens
-Burst weapon => per click FSM+recoil decrease/s

tl;dr read the manual


also, click "test" to temporarily write a macro to N/button4

Thank you, but there aren't this things on the manual only something about X,Y axis Anyway it is easy to say in this method for you that know how to do a macro eheheh...

The only calculation i do is to convert RPM in millisecond and then try to make a no recoil macro with "one point concentrated bullets"...My method is sure worst than yours and required a lot of play/exit the game hehehehe...

[CaueMene]

Great Thread bro!

[Yellow 13]

Ah fuck, A4Tech decided to encrypt .amc files from now. :|

Can't use NP++ anymore ;_;


Anyways, this is a minor release

1. BF3 Revive V2, a slower "autorevive" script for BUTTON 4/5 ONLY. Made slower but with a more consistent revive (youtube PMs stating that sometimes does not switch back to main gun/revive)

revivev2.rar - Jotti's malware scan

https://www.virustotal.com/en/file/7...is/1377289189/



2. M16A4 rapidfire with norecoil (2x more accurate than M16A3... theoretically) is on Beta-3 stage, only accept RDS + FG + HB. As for now only for A4Tech BLOODY core3 mouse, when the FINAL macro is released (FGSUPP + FGHB; hipfire norecoil (auto switching). If you want the macro to be perfected and be better (small probability to decrease wait time for final release) please post any comments (recoil too much, overcompensation, jam, etc.). And if you really wanna help, examine a 60FPS slo-mo video of you testing this macro, tell me at what point the compensation is not right, etc etc.

Is affected less by suppression because each 3x bullet makes spread pattern reset to smallest possible at the time.

Prot03.rar - Jotti's malware scan

https://www.virustotal.com/en/file/5...is/1377288942/

EDIT: For OSCAR A4tech

https://virusscan.jotti.org/en/scanre...c3129f5adc9aad

https://www.virustotal.com/en/file/1...is/1377290366/



@bullpop @Paralyze


Shotgun rapidfire maybe tomorrow
G3 on sunday
AK series on next week~

UPDATE:

+++===+++
Attention!
In the recent Bloody4 software update, A4Tech has encrypted their plain text AMC file. Here is a workaround

If your oscar software or bloody software shows an error opening the AMC (oscar), or MGN (older bloody software), then you need to:


1. Bloody mouse -> update to latest version of bloody software (providing that you have the genuine activation HWID)
[B]




2. If you have an older oscar mouse, install bloody4 (2013.08 version or newer)

Using the read only oscar editor, open the .amc file you downloaded from MPGH

You will see commands, keep the bloody4 software open.

Now open your Oscar editor for older X7 mouse, make new macro, input the EXACT same command in the bloody4 software window.

If you save it, the file will be created and the macro will now be usable

You can upload the .amc file to MPGH for helping others (I will instantly rep+thank you)

Be sure to include in the file name ending "-Oscar" to indicate the file is .amc (please do!)


If you prefer using text quote you're also welcome!

Example using text code

M16A4: https://www.mpgh.net/forum/174-battle...ml#post8732052

AN94: https://www.mpgh.net/forum/174-battle...ml#post8741825

Examples thanks to jkinnune






Tutorial for non-genuine bloody mouse users stuck on Bloody3
Using .amc in the N/3 buttons of bloody mouse
Must use non-encrypted .amc


-Place targeted .amc in your folder (eg: Macrolibrary/battlefield3)

1. Click headshot tab (make sure Select game: Battlefield3 [folder name inside /macrolibrary/~]
2. Click headshot bible button below the tab
3. Select M-MACRO
4. Select your targeted macro, eg: weapon.amc
5. Place record resolution at 1680x1050
6. Save it using this name "weapon-MGN" (-MGN differentiate from normal .amc file)
7. Click "back"
8. Assign "weapon-MGN" towards N/3 button, click apply
9. Test macro!

Although $20 activation isn't bad for a mouse that will be really useful
+++====+++

[Paralyze]

Ah fuck, A4Tech decided to encrypt .amc files from now. :|

Can't use NP++ anymore ;_;


Anyways, this is a minor release

1. BF3 Revive V2, a slower "autorevive" script for BUTTON 4/5 ONLY. Made slower but with a more consistent revive (youtube PMs stating that sometimes does not switch back to main gun/revive)

revivev2.rar - Jotti's malware scan

https://www.virustotal.com/en/file/7...is/1377289189/



2. M16A4 rapidfire with norecoil (2x more accurate than M16A3... theoretically) is on Beta-3 stage, only accept RDS + FG + HB. As for now only for A4Tech BLOODY core3 mouse, when the FINAL macro is released (FGSUPP + FGHB; hipfire norecoil (auto switching). If you want the macro to be perfected and be better (small probability to decrease wait time for final release) please post any comments (recoil too much, overcompensation, jam, etc.). And if you really wanna help, examine a 60FPS slo-mo video of you testing this macro, tell me at what point the compensation is not right, etc etc.

Is affected less by suppression because each 3x bullet makes spread pattern reset to smallest possible at the time.

Prot03.rar - Jotti's malware scan

https://www.virustotal.com/en/file/5...is/1377288942/

EDIT: For OSCAR A4tech

Prot03_OSCAR.rar - Jotti's malware scan

https://www.virustotal.com/en/file/1...is/1377290366/



@bullpop @Paralyze


Shotgun rapidfire maybe tomorrow
G3 on sunday
AK series on next week~

Approved them.

[Yellow 13]

AN94 macro as requested by some



Suppressor is useless for this gun


Use foregrip if you wish (better horizontal recoil control), but the macro is made from non-gripped recoil pattern


Video (kinda laggy, but without dxtory bogging the hdd it's perfect norecoil)






PLEASE REFER TO SETUP IN 1ST PAGE


AN94 with oscar mouse work (bind to one button and that's for AN94) .AMC file

Bloody mouse use .MGN file. not .AMC



Virscan

an94.rar - Jotti's malware scan

https://www.virustotal.com/en/file/f...is/1377701237/


Prerelease version, taking in feedback from users before final macro is rolled out.



Include autoswitching hipfire only (not aiming [RMB not pressed]) and ADS norecoil [RMB press]

UPDATE:

+++===+++
Attention!
In the recent Bloody4 software update, A4Tech has encrypted their plain text AMC file. Here is a workaround

If your oscar software or bloody software shows an error opening the AMC (oscar), or MGN (older bloody software), then you need to:


1. Bloody mouse -> update to latest version of bloody software (providing that you have the genuine activation HWID)
[B]




2. If you have an older oscar mouse, install bloody4 (2013.08 version or newer)

Using the read only oscar editor, open the .amc file you downloaded from MPGH

You will see commands, keep the bloody4 software open.

Now open your Oscar editor for older X7 mouse, make new macro, input the EXACT same command in the bloody4 software window.

If you save it, the file will be created and the macro will now be usable

You can upload the .amc file to MPGH for helping others (I will instantly rep+thank you)

Be sure to include in the file name ending "-Oscar" to indicate the file is .amc (please do!)


If you prefer using text quote you're also welcome!

Example using text code

M16A4: https://www.mpgh.net/forum/174-battle...ml#post8732052

AN94: https://www.mpgh.net/forum/174-battle...ml#post8741825

Examples thanks to jkinnune






Tutorial for non-genuine bloody mouse users stuck on Bloody3
Using .amc in the N/3 buttons of bloody mouse
Must use non-encrypted .amc


-Place targeted .amc in your folder (eg: Macrolibrary/battlefield3)

1. Click headshot tab (make sure Select game: Battlefield3 [folder name inside /macrolibrary/~]
2. Click headshot bible button below the tab
3. Select M-MACRO
4. Select your targeted macro, eg: weapon.amc
5. Place record resolution at 1680x1050
6. Save it using this name "weapon-MGN" (-MGN differentiate from normal .amc file)
7. Click "back"
8. Assign "weapon-MGN" towards N/3 button, click apply
9. Test macro!

Although $20 activation isn't bad for a mouse that will be really useful
+++====+++

[Julma Henri]

AN94 macro as requested by some



Suppressor is useless for this gun


Use foregrip if you wish (better horizontal recoil control), but the macro is made from non-gripped recoil pattern


Video (kinda laggy, but without dxtory bogging the hdd it's perfect norecoil)






PLEASE REFER TO SETUP IN 1ST PAGE


AN94 with oscar mouse work (bind to one button and that's for AN94) .AMC file

Bloody mouse use .MGN file. not .AMC



Virscan

an94.rar - Jotti's malware scan

https://www.virustotal.com/en/file/f...is/1377701237/


Prerelease version, taking in feedback from users before final macro is rolled out.



Include autoswitching hipfire only (not aiming [RMB not pressed]) and ADS norecoil [RMB press]

/File Approved .

[pumikutya]

Wrong macro file! I have oscar x7 mouse /xl-740k/ I copy the macro file to the macro library! But I can not open because the file include invalid caracters! Please help! Look my picture! Thanks!

[Matroix73]

Great thread!

[jkinnune]

Wrong macro file! I have oscar x7 mouse /xl-740k/ I copy the macro file to the macro library! But I can not open because the file include invalid caracters! Please help! Look my picture! Thanks!

Have the same issue.

I see a few days ago the Bloody mouse he has updated their software. Has something to do with that.

[jkinnune]

Yeah that's all it is. You can download the Bloody4 software, open the macro in it, and see the text. Copy that into a new txt document and change the extension and it should be good to go, though I haven't tested it just yet. Looks to be solid.

[pumikutya]

But I have Oscar mouse! I use the newest Oscar editor! I open the macro file with notepad and I look don't have mouse move command!

[Yellow 13]

If someone can give me a download link to a previous bloody4 software to convert newer amc macros I would thankful

Edit: I also contacted bloody support, I'll post if a reply comes.