Regularly updated community macro thread [X7 Mouse]

[Maestro81]

You just have to remember to change it in Oscar to click to run and release to stop more than anything else. If you find that you get stuck then unplug the mouse and use another. I manage to get it to change and apply.

Nothing wrong with the macros themselves.

[voodoosk8]

You just have to remember to change it in Oscar to click to run and release to stop more than anything else. If you find that you get stuck then unplug the mouse and use another. I manage to get it to change and apply.

Nothing wrong with the macros themselves.

Use another mouse...as in buy a new mouse+bloody activation?...
I already did what you said and it still gets stuck. The weird part is that if I use the macro on XBUTTON is works fine. As soon as I convert it to M-MACRO it gets stuck(not all the time, only when I press RMB+LMB at the same time)

[Maestro81]

I don't have a bloody mouse so I don't have an Xbutton and I can't make a macro be used on my M button

[voodoosk8]

I don't have a bloody mouse so I don't have an Xbutton and I can't make a macro be used on my M button

Ok, that pretty much cleared it out. Makes sense now.

[zzcromuszz]

hey guys, how i convert .amc to .bwp.. i want to use in N/3 buttons

[kulka1]

hey guys, how i convert .amc to .bwp.. i want to use in N/3 buttons

O.M.G, Why DFQ are u spaming this idiotic questions, u CAN NOT do this, some1 wrote this some posts before.........

[Magnus1992]

O.M.G, Why DFQ are u spaming this idiotic questions, u CAN NOT do this, some1 wrote this some posts before.........

It's easy, convert to .mgn instead.

In headshot-mode:

- choose M-macro
- open the .amc in the scrollwindow
- save with any name
- go back to where you usually find your C-machine .bwp macros. The converted .amc macro is now ready to be bound to N/3 buttons

[kulka1]

Yellow, 2 quest: will M16A4 have this when key is pressed ?, and 2. How long to ace 23 4x

[zzcromuszz]

It's easy, convert to .mgn instead.

In headshot-mode:

- choose M-macro
- open the .amc in the scrollwindow
- save with any name
- go back to where you usually find your C-machine .bwp macros. The converted .amc macro is now ready to be bound to N/3 buttons

thanks brother

[Yellow 13]

Yellow, 2 quest: will M16A4 have this when key is pressed ?, and 2. How long to ace 23 4x

It would be faster if my school stops giving fucking essays to be written

[hunter555777]

Here is my ACE-4X-HEAVY BARREL-ANGLED GRIP settings:

Press Left key
Delay 50ms
Mouse relative move 0 11
Release left key
Delay 50ms
Press Left Key
Delay 50ms
Delay 50ms
Mouse relative move 0 11
Release left key
Delay 50ms
Press left key
Delay 50ms
Mouse relative move 0 11
Release left key
DElay 50ms
Press left key
Delay 50ms
Mouse relative move 0 12
Release left key
Delay 50ms
Press left key
Delay 50ms
Mouse relative move 0 13
Relase left key
Delay 50ms
Jump to line2

[kulka1]

atm i dont have time, when i came back from shool i will see, but i dont think that this is very good

[Ali Raza]

Interesting I will try

[kulka1]

this macro isnt good..., yellow what attachments will be M16A4 ?

[Yellow 13]

this macro isnt good..., yellow what attachments will be M16A4 ?

RDS / 3.4 / canted

Any grip except folding-angled / Angled-folding

Naked barrel / HB