Thanks for answer Yellow !
But what about my second question regarding place to buy with free shipping ?
I found couple of sellers from South Korea and Hong Kong on Ebay but i don't know what the sellers mean by Sky Bloody V5 in the name ? Sky?
Anyone of you guys have some experience with v5?
Last edited by Deimosmacro; 05-12-2014 at 07:49 AM.
Poster below me gets to choose macro for tomorrow
SCARH Nospread (replace old norecoil + nospread script) or AK5C nospread (include slow RPM)
ACE23 nospread will be delayed until both is released (if you want it, PM me)
Rig | 5820K - GTX1080 AMP
P870KM1 | 7700K - GTX1080N SLi
Yellow 13: SCARH Nospread (replace old norecoil + nospread script).
SCARH Nospread (replace old norecoil + nospread script)
Nice
This has come up very interesting for me. BF4 CTE has new sensitivity values for different sights / optics.
It can mean, if this system is implemented in BF4 retail, I can make RDS/iron/2x FLIR macros integrated into 1 file.
You can tweak the sensitivity so that if you move your mouse X-cm for 360 rotation for RDS, you can tweak this the same for Ironsights.
Moving the mouse 1 pixel via oscar script can be 1 pixel for ALL scopes. -> faster macro development.
Though, there's an extremely slight discrepancy between distance X for different sights. I hope this won't have an impact in the gun's effective range when using macro.
0.02 @800DPi results in 19.95cm/360rotation if you're wondering.
BF4 sens 0.02, to achieve same Xcm/360
-Iron = 0.045
-RDS = 0.036667
via: https://www.mouse-sensitivity.com/
Variables
GstInput.SoldierZoomSensitivityCloseMagnRange x
GstInput.SoldierZoomSensitivityCloseRange x
GstInput.SoldierZoomSensitivityLongRange x
GstInput.SoldierZoomSensitivityMediumRange x
GstInput.SoldierZoomSensitivityVeryLongRange x
Last edited by Yellow 13; 05-15-2014 at 11:17 AM.
Rig | 5820K - GTX1080 AMP
P870KM1 | 7700K - GTX1080N SLi
HaxxerPanda (02-21-2015),professor315 (05-15-2014),Rumble9000 (05-16-2014)
Played BF4 CTE, this option is called "Uniform Soldier Aim"
Your sights (Iron, RDS) now does the same Xcm/360 as your soldier's hipfire, but it increases the sensitivity of the game too much for existing macro offset :/
Oscar scripts run it's offset via pixel shifting, so I'd be sorry to say if this option is implemented to be available in BF4 retail, I will have to redo all macros from scratch.
With Dragon Teeth nearing, it's very likely for BF4 retail to get this option too. I don't have problem redoing the macros, but they take time
I'll see what I can do first.
IF YOU HAVE PLAYED BF4 CTE AND WANT MACROS TO WORK, PLEASE TURN OFF THE OPTION "UNIFORM SOLDIER AIMING"
This is only temporary until BF4 retail gets patched. Then I will make macros that is able to be used with this option on.
Rig | 5820K - GTX1080 AMP
P870KM1 | 7700K - GTX1080N SLi
omatko (05-17-2014),professor315 (05-16-2014)
Hi Yellow13,
thanks for making macros for the bloody mouse,
i went to buy one today to replace my old X7 mouse
after downloading the many macro files you have provided, i wanted to try it out
for those .bwp files, they work for me flawlessly uploading them to the mouse via bloody 5 headshot
for the .amc files, i couldn't make them work..???
i tried the following:
- setting mouse button 4 and 5 directly to macro function(with -NL files), supposedly mouse button 4/5 directly do the macro, but it only shoots normally in the bf4 test range
- open headshot, macro, and then test, assign N/3 as instruction. supposedly left mouse button (button 1) will be replaced by macro but it only shoots normally also.
i wonder what am i doing wrong here? please help..
btw, reading through 70+ pages of threads, i noticed you're from indonesia? i'm from indo as well.. salam kenal bro
I suppose you DLed the -NL files is
-F2000
-M240B no recoil
Those 2 are flawed and you should NOT be using the macros "click to activate"
Delete those and look in my youtube for
"M240B no spread" -> NEW version which can shoot full auto or reduced RPM for increased bullet concentration.
The old "click to activate" and "-NL" files do not work properly and I scrapped them only days after release. Sorry about that.
BWP files are no longer used, I am making .AMC macros to support old X7 owners and Oscar macro has much more flexibility compared to BWP.
.AMC can be used in 3/N/4 buttons via M-Macro mode in headshot section of Bloody5.
Last edited by Yellow 13; 05-16-2014 at 10:21 AM.
Rig | 5820K - GTX1080 AMP
P870KM1 | 7700K - GTX1080N SLi
zeroshiki (05-16-2014)
tried it again and still doesn't work, tested other's .amc and it worked. i think i found why when opening the .amc files thru oscar view..
on the 1st line, the other working .amc has header like //-----------------------
the .amc files from yellow doesn't...
trying to figure out how to add the line and test..
sorry for the trouble. dunno what's wrong with the mouse, i bought the TL8A
edit: nevermind, i think i found the solution why it didn't work, on the 2nd line is something like: if key 2 not pressed go to line 1. i have my ADS on toggle on/off, so i'll try to delete that 2nd line and see if it works now.. cheers
edit post 2: found it! it was indeed the toggle on/off ADS. now it's working flawlessly! awesome!! thanks for making the macros yellow13. cheers!!
Last edited by zeroshiki; 05-16-2014 at 01:17 PM. Reason: found solution, i think
BF4 CTE "Uniform Soldier Aiming" option bar
https:// abload .de / img / usaf8ja6.jpg (remove spaces)
Rig | 5820K - GTX1080 AMP
P870KM1 | 7700K - GTX1080N SLi
omatko (05-18-2014)
New mouses released for US/International market (will probably hit SEA first)
I will separate this based on sensor: https://www.bloody-us*****m/en/products.php?pid=10&id=26
Note:
-All wired mouse can go to 1000hz report rate. All wireless only 500hz. But hybrid wire/less can go to 1000hz if using wired mode.
-Metal feet increase control on cloth surface but increases glide resistance (tested on SS QCK+)
-Metal feet decreases speed on hard mouse pad (plastic) -> too little resistance for my taste (tested with Corsair MM400)
-Not recommend using metal feet on aluminum mousepad like Razer Manticor -> metal v metal= bad
-Angle snapping= disregard minor movement changes to create "straight line" effect
-Accel= cursor movement is slower or faster when you swipe mouse (not exact movement, very bad effect on muscle memory)
-Interpolation= boosting actual DPi -> result in loss of accuracy and jitter
Pixart PMW3305DK Optical 1mm lens
Traits: Acceleration free, angle snapping/smoothing (slight), trackspeed maxes at 68IPS (1.7m/s - quite low).
DPi: 3200DPi max, uninterpolated. 100DPi native steps.
V2/V3/V5/V7/V8 and R-series (wireless).
V2: Shaped like Razer copperhead/diamondback
V3 - similar to deathadder (right handed) - separated clickers from mouse chassis
V5 (?)
V7 (?)
V8 - shape is more ambidextrous compared to V7 - mirrored left and right mousefeet - uses same PCB assembly as V7
Switch: Huano Blue point - rated to 10M clicks before failure
Web (USA-EN)
R-series: https://www.bloody-us*****m/en/products.php?pid=10&id=3
V-series: https://www.bloody-us*****m/en/products.php?pid=10&id=2
All series adopt classic 3 mode macro selection. 1-N-3 button (2 macro profile)
Avago A3050 Optical
Traits: A bit more apparent angle snapping compared to 3305, accel(unconfirmed, probably free), maxspeed around 160IPS (4m/s)
DPi: Native max 2000, above 2000 is interpolated.
Note: do not buy
A3050 documentation on DPi firmware.
0x01: 250 dpi
0x02: 500 dpi
0x04: 1000 dpi (default)
0x05: 1250 dpi
0x06: 1500 dpi
0x07: 1750 dpi
0x08: 2000 dpi
Use only these DPi when selecting, value outside aside from the stated above will cause sensor inaccuracy.
*possible jitter at 2000DPi
*low cost sensor, best performs at 500DPi/125Hz report rate
A9: Most similar to Deathadder. Clickers join with the chassis and sidebutton shape is more ergonomic (bigger). 1-3-N
A6: A bigger V8 + V5 mix? 1-3-N
A7: Same A6 with different light color. 1-3-N
T5: (?) - [1-N]-3-4 selector
RT5: T5 but wire/less - [1-N]-3-4 selector
T6: T5 with different chassis (smoother, no decoration) - [1-N]-3-4 selector
T7: Copy of V7, but with [1-N]-3-4 selector
A9: https://www.bloody-us*****m/en/products.php?pid=10&id=34
A6: https://www.bloody-us*****m/en/products.php?pid=10&id=32
A7: https://www.bloody-us*****m/en/products.php?pid=10&id=33
T5: https://www.bloody-us*****m/en/products.php?pid=10&id=28
T6: https://www.bloody-us*****m/en/products.php?pid=10&id=24
T7: https://www.bloody-us*****m/en/products.php?pid=10&id=29
Omron D2FC-F7-N (rated 20M clicks) + spring loaded clicker (faster button rebound)
Avago ADNS-9800 Optical Laser (VCSEL)
Traits: Miniscule angle snapping (less than 3305DK), INCONSISTENT POSITIVE ACCELERATION (more noticeable on cloth pad. sensor is extremely intolerant to dust on cloth. --> recommend to ALWAYS use hard mouse pad), maxspeed 150IPS (3.8m/s).
-similar to ADNS9500 (Sensei/Raw, G9x) sensor but less angle snapping + 100DPi native step instead of 90DPi
DPi: 8200DPi native max. 100DPi native steps. No interpolation.
Note: most mouses use same chassis as A3050 but labelled "Terminator" - when you buy this sensor please use HARD MOUSE PAD (recommend Logitech G440)
TL5. [1-N]-3-4 selector
TL6. [1-N]-3-4 selector
TL7: V7 with A9800+[1-N]-3-4 selector
TL8: Bigger version of V8. [1-N]-3-4 selector
ZL5 "Sniper": Different design of button. Separate [1-N] and 3-4, different Mbutton 4/5 design, dedicated DPi shift/Sniper macro button. Has dedicated DPi switcher. Design similar to Corsair M45.
TL9: Same like ZL5 but with [1-N]-3-4 selector, normal Mbutton 4/5.
AL9: A9 with A9800 sensor, weight tuning like some X7 mouses. 1-N-3 selector
WL5 Wire/Less: RT5 with A9800.
ML16 "commander": TL9 with numeric pad on RMB
TL5: https://www.bloody-us*****m/en/products.php?pid=10&id=30
TL6: https://www.bloody-us*****m/en/products.php?pid=10&id=31
TL7: https://www.bloody-us*****m/en/products.php?pid=10&id=38
TL8: https://www.bloody-us*****m/en/products.php?pid=10&id=18
ZL5: https://www.bloody-us*****m/en/products.php?pid=10&id=17
TL9: https://www.bloody-us*****m/en/products.php?pid=10&id=23
AL9: https://www.bloody-us*****m/en/products.php?pid=10&id=35
ML16: https://www.bloody-us*****m/en/products.php?pid=10&id=20
Omron D2FC-F7-N (rated 20M clicks) + spring loaded clicker (faster button rebound)
Aaand, we still don't have a Bloody mouse with PMW3310 sensor >_>
Last edited by Yellow 13; 05-21-2014 at 10:44 AM.
Rig | 5820K - GTX1080 AMP
P870KM1 | 7700K - GTX1080N SLi
I Bougth a bloody v7 mouse with core 3 actived. But it dosent see .AMC files, just bwp files. How can i convert .amc to bwp? i'm using bloody v5.