Regularly updated community macro thread [X7 Mouse]

[Yellow 13]

@Yellow 13
how do I convert macros so I can use them with N/3 button ?

check previous pages

if still can't find the way, consult your eye doctor

[bartolica]

check previous pages

if still can't find the way, consult your eye doctor

there is 68 pages :C

[Yellow 13]

there is 68 pages :C

Page 1

/10char

240B nospread macro (replace norecoil) either today or tomorrow

[greyjoy]

IS there a way to increase the sensitivity while using these macros? its 13% in game right now and 3200 dpi but normally I'm using 3500 dpi and 45 sensitivity in game. Mouse is great and macro is great just feels really slow in the movement department.

[fishncips4T]

hope you lot know they are banning for macros now and yes they can incase you are wondering

[Yellow 13]

IS there a way to increase the sensitivity while using these macros? its 13% in game right now and 3200 dpi but normally I'm using 3500 dpi and 45 sensitivity in game. Mouse is great and macro is great just feels really slow in the movement department.

Get newer mouse like ZL/TL/WL series (A9800, 8200DPi, 1000Hz (500hz wireless)) works best on hard surfaces like plastic mat (Corsair MM400)

Or Wireless RT5 (A3050, optical, 4000DPi, 500Hz)

hope you lot know they are banning for macros now and yes they can incase you are wondering

Had like 8 OP locker game last night with 3+ KDR because of M240B nospread macro, no ban.

Also, don't try to spam the thread with your bullshit.

[bartolica]

hope you lot know they are banning for macros now and yes they can incase you are wondering

how can they ban somebody for macro?
how will they know?
well! they wont! ha!

[greyjoy]

Get newer mouse like ZL/TL/WL series (A9800, 8200DPi, 1000Hz (500hz wireless)) works best on hard surfaces like plastic mat (Corsair MM400)

Or Wireless RT5 (A3050, optical, 4000DPi, 500Hz)

Wish I knew about these new mouse sooner, I adjust couple macro to my liking at high sensitivity, works great too!

[Yellow 13]

Wish I knew about these new mouse sooner, I adjust couple macro to my liking at high sensitivity, works great too!

Rundown of available Bloody series mouse




Gen1

V series - 3/5/7/8 - Pixart 3350DK, 3200DPi max, 1600 native, 200DPi native +/- steps, report rate 1000Hz max. Minor sensor prediction, minimal acceleration(negative-positive).

R series - carbon copy of the V series but with wireless+internal battery. Report rate is limited to 500Hz. Wireless exclusive.

V/R series: recommend CLOTH mousepad like SS QCK, Artisan Hayate.
*don't buy the QCK series with graphics on them (team editions) the 3350DK doesn't track well on multicolor surfaces
**recommend unicolor mousepad, preferably BLACK

Uses Huano (10M cycle) switches, loud click. Slight actuation force needed, click reset is crisp and noticeable.





Gen2


TL8 (wired) / WL5 (wired/wireless) / ZL5 (sniper) - ADNS 9800, 8200DPi, 200DPi native +/- steps, report rate 1000Hz max (WL5 on wireless mode, limited to 500Hz).

WL5 also has internal battery for wireless feature.

ADNS 9800: recommend solid plastic / surface mousepad: Corsair MM400 (plastic), Artisan Shiden (hybrid cloth+glass coat), Artisan Shiden KAI (shiden with faster glide/less friction), Steelseries HD. Maybe the Razer Manticor, but idk.

*WL5 uses external USB dongle.
**sensor is almost similar to the 9500 used in LG G9X
***Accel / jitter issue on cloth mousepad, not recommended.



Wireless RT5: ADNS 3050, 4000DPi max, 200DPi native +/- steps, report rate, max 500Hz. Low max tracking speed, prediction. Overall not recommended.

Tracks well on cloth mousepad like the 3350DK



Uses Omron D2FC-F-7N (20M cycle) switches, silent click. Less travel and less pressure needed to click compared to Huano, but click reset is not as noticeable.




-> All Gen2 mouse are equipped with Metal Feet/Armor boot
-> Suffixed with "A" at the end = Core3/4 activated (free)
-> Suffixed with "M" at the end = Metal feet installed (Gen1 only)
-> Suffixed with "AM" at the end = metal feet+core3/4 activated (Gen1 only)





I know none of these sensor is perfect (3350DK, 9800, 3050), but I think it's good enough for my BF4 experience.



What I'd pay for, is a Bloody mouse with the ADNS 3310 optical sensor (No accel, no prediction, adjustable LOD, 5000DPi), some mouse uses it like the SS Rival or the Mionix Avior/Naos 7000, or the (logitech exclusive ;_ PMW3366 (12K DPi, no accel, no prediction) on the G502. (seriously would pay up to $70 for Bloody mouse with either sensor)

Macro for M240B

The attachment that can be used:
Sights: RDS, Iron or IRNV
Underbarrel: Any. But folding/angled grip has separate macro.
Barrel: Any except muzzle break.
It does: Norecoil and rapidfire
Special notes: It is better if you have a stable FPS!
FOV: 90
Sensitivity: 0.020000
Lean sens: 0.500000

Can be used in Headshot M-Macro mode by conversion
Can be used in Older X7 Oscar with conversion (READ 1st PAGE)



Support the making of macros by subscribing and viewing demo videos of my macro here -> Youtube!



DISABLE THIS SETTING IN THE VIDEO OPTION ->



File type

Iron = use with Iron sight or IRNV scope

RDS = use with 1x RDS or 1x HOLO

If macro does not have "HB" = can use standard barrel, flash hider, suppressor or compensator

If macro have "HB" = use heavy barrel

If macro does not have "AFG" = can use any grip except folding / angled, cannot use if bipod is deployed

If macro have "AFG" = use with folding / angled grip (less visual wobble)

If macro have "RR" = fires at REDUCED RPM of 600, more accurate

If macro does not have "RR" = fires at about 645-648 RPM (faster, less accurate)

If you do not aim, but press macro button, weapon will fire at max RPM (650RPM)



This is .AMC file, which can be used in older X7 Mouses (OSCAR), you need to simply look at the first page of the thread to convert this encrypted .AMC to be usable in older OSCAR editor.


New revision file type. Reduced file size and syntax complexity. The macro can be assigned to any button you like!

Pressing the macro button while aiming will have no recoil effect, but if you do not aim, the macro will not compensate for recoil. This reduced unwanted mouse pulling down while not aiming!



https://www.virustotal.com/en/file/0...is/1397834427/

https://virusscan.jotti.org/en/scanre...652fd29185ad18


@Mayion or @bullpop

[[MPGH]Mayion]

Approved .

[mkonsesh]

@Yellow 13
hey , does the TL8 mouse have problem with stuck aiming?
or the x7 using the old oscar editor?
thx

[Yellow 13]

@Yellow 13
hey , does the TL8 mouse have problem with stuck aiming?
or the x7 using the old oscar editor?
thx

all bloody series do

oscar mouse do not

[mkonsesh]

@Yellow 13
so what x mouse should i get? ( or the best ? and the same as v7 "dimension" )
thanks again

[Yellow 13]

@Yellow 13
so what x mouse should i get? ( or the best ? and the same as v7 "dimension" )
thanks again

https://www.x7.cn/en/index.asp

Don't forget to google the sensor type / characteristics that the mouse uses

[fishncips4T]

Well did try to warn ya all...ask FF is ya don't believe me and you don't so go ask Quote "We do detect a lot of macro users." unquote