Internal ESP by Puddin Poppin - He created this hack all I did was make the ini file with the current offsets and I will continue to update them when they change
Status: Undetected
Offsets updated as of 7/1/2015
Features:
1) Box
2) Snap lines
3) Bones
4) Health bar
5) Recoil crosshair
Controls:
CTRL+F1 Toggles all features
CTRL+F2 Toggles box
CTRL+F3 Toggles snap lines
CTRL+F4 Toggles bones
CTRL+F5 Toggles health bar
CTRL+F6 Toggles recoil crosshair
CTRL+F8 Kills the hack
WARNINGS:
MUST BE RUN IN FULLSCREEN WINDOWED MODE
CHANGING RESOLUTION MID-GAME WILL REQUIRE YOU TO REINJECT
INJECTING INTO CSGO.EXE WILL RESULT IN A VAC BAN
PERFORMANCE WILL VARY FROM PC TO PC
REQUIRES DWM COMPOSITION SUPPORT AND LAYERED WINDOW SUPPORT
THIS WILL NOT WORK WITHOUT OFFSETS.INI
Injection Instructions:
first thing you want to do is open your injector. I recommend extreme injector but other injectors might work as well. If you are using extreme injector first thing you want to do is go into "settings" and make sure that you are using "manual map" for your injection method. You can also choose "Erase PE" and "Hide Module" in the "Post-Inject" options. The next bit of information is about scrambling or obfuscating the dll. This is not a neccessity but it doesn't really hurt anything. If you want to scramble the hack file go to "scrambling options" and choose "custom". Then from here click the "Advanced" button and choose all the options except "create new entry point". Next, click the "scramble DLL" button and select the hack file. Then click "open" then click "save" and it should say that your dll has been scrambled successfully. From here, click "ok" to exit the "settings" menu and then click "add dll". Select the scrambled hack file and hit open. Now, you need to decide which program you want to inject the hack into. It is very important that you do not inject the hack into the game process, because this will result in a VAC ban. I use skype as my 32bit process, but almost any 32bit process with work. After you have decided which process to inject into, hit the "select" button and find your process from either the "window list" or "process list". After you have found the process hit the "select" button. Now you are ready to inject. Hit the "inject" button and it should say that your hack has been injected successfully. Now, start the game and join a match. You should now see that the hack is working. When you are done using the hack, hold control and press f8; the hack should kill itself.
Offset Info:
In order to use this hack you must create a file called "offsets.ini"(extension should not be included in the name) so that you can update the offsets yourselves. This file must be placed in a folder called "ESP3" on your "C:\" drive. The complete path to file should be as follows:
Code:
C:\ESP3\offsets.ini
Inside "offsets.ini" you should place the offsets in the following order and format:
Code:
Code:
m_dwViewMatrix=0xXXXXXXXX
m_dwEntityList=0xXXXXXXXX
m_dwLocalPlayer=0xXXXXXXXX
m_iHealth=0xXXXXXXXX
m_vecOrigin=0xXXXXXXXX
m_iTeamNum=0xXXXXXXXX
m_lifeState=0xXXXXXXXX
m_dwBoneMatrix=0xXXXXXXXX
m_vecPunch=0xXXXXXXXX
m_bDormant=0xXXXXXXXX
CURRENT OFFSETS
Code:
Code:
m_dwViewMatrix=0x04A0E204
m_dwEntityList=0x04A18C74
m_dwLocalPlayer=0x00A76CCC
m_iHealth=0x000000FC
m_vecOrigin=0x00000134
m_iTeamNum=0x000000F0
m_lifeState=0x0000025B
m_dwBoneMatrix=0x00000A78
m_vecPunch=0x000013E8
m_bDormant=0x000000E9
DO NOT...
DO NOT...
change the order of the offsets.
remove the '='
add anything other than the offset after the '='
Virus Scans: