ITrigger v2.0
INSTRUCTIONS
1. Change Game Settings-Settings -> Video -> Screen Type = BORDERLESS WINDOW or FULLSCREEN
-Settings -> Gameplay -> Reticle Change Over Target = ENABLED
-Settings -> Gameplay -> Reticle Type = DOT
2. Assign all Key Bindings-Choose Key Binding Tab
-Click Edit Button
-Click desired Text Box for Key Binding you wish to change
-Press your desired key to assign it.
-Click Edit Button again after all changes have been made.
3. Set required colors-Key Bindings "Set Normal, Set Target, Set OOR" must be assigned.
Normal
-Make sure your not aiming at any targets (in-game)
-Hit the Set Normal Key.
Target
-Make sure you are aiming at a target, reticle should be Red-ish in color. (in-game)
-Hit the Set Target Key.
OOR
-Make sure you are aiming at a target. Make sure character is at a distance for reticle to be Orange-ish in color. (in-game)
-Hit the Set OOR Key.
-Verify all colors on ITrigger's interface in Colors have been set, and match corresponding reticle colors in game.
Easiest to set colors in the Shooting Range.
4. Changed desired settings-See Options in Definitions below.
5. Use hotkey to activate ITrigger-In game you can now press the Key Binding to Activate(turn on/off) ITrigger. (Make sure Paladins is running before turning ITrigger on).
DEFINITIONS
ColorsNormal - Color of reticle when not aiming at target.
Target - Color of reticle when aiming at target thats in range.
OOR - Color of reticlle when aiming at target thats Out of Range.
OptionsFire Mode - Depends on character being used. Some characters require Full while others require Semi.
Enable Trigger Key - if check, Triggerkey must be held down for ITrigger to fire.
Fire on OOR - if checked, ITrigger will fire when target is out of range (orange-ish reticle).
Key BindingsActivate - key used to turn ITrigger on or off.
Trigger Key - key to be held down if Enable Trigger Key is checked.
Set Fire Mode - key that changes Fire Mode.
Set Normal - sets the Normal color for reticle. (displayed in Colors)
Set Target - sets the Target color for reticle. (displayed in Colors)
Set OOR - sets the OOR color for reticle. (displayed in Colors)
https://vimeo.com/user105714296/revi...077/e4e6f2704f
Virus Scans
Jotti
Virustotal
- - - Updated - - -
Thanks for the help, i posted the new post