7's Fishing Bot (with auto-drop of boots)

[konradmm]

First of all, i would like to thank Zog for the fishing script idea and Xaymar for tooltip idea (this bot is made 100% by me, but ty though)
Second of all, i started with using taejin's Pointers (i have no idea how to find it)
And the last of all, my bot is in very BETA. (not long tested)

Features:

• Fishing in Water/Lava/Chocolate
• Auto-Drop of Boots version included
• Notify pop-up when ur inventory is full (good if ure not using auto-drop of boots)
• (new) Bot configuration: change-able hotkey, different config for each bot
• Bot statistics

Instructions/Installation:

1. Download archive from attachment
2. Unpack archive somewhere on ur HDD
3. Launch 'My_32bit.exe' (advanced users may run 64bit version) - if u experiance problems, run 32bit one.
3 ½. If its first run, configure ur bot using the gui and restart bot (next version it will look nicer, for now check spoiler below)
4. Go to your Trove window, stand up near water, open inventory.
5. And press ur Hotkey to start (default: NumPad7)

 

HotkeyToStart - Any hotkey u want to use to start the bot (list below)
HotkeyToStop - Any hotkey u want to use to stop the bot
Auto-Drop Boots - Switch On/Off Dropping boots (trove window needs to be active), 1 - On, 0 - Off
Auto-Drop Type - Not fully implemented, to do in next version
Full Inv Notify - Switch On/Off Notify when Inventory is full or Out of lures, 1 - On, 0 - Off

 

Keycodes:
CapsLock
Space
Tab
Enter
Escape
Backspace
ScrollLock
Delete
Insert
Home
End
PgUp
PgDn
Numpad0
NumpadIns
Numpad1
NumpadEnd
Numpad2
NumpadDown
Numpad3
NumpadPgDn
Numpad4
NumpadLeft
Numpad5
NumpadClear
Numpad6
NumpadRight
Numpad7
NumpadHome
Numpad8
NumpadUp
Numpad9
NumpadPgUp
NumpadDot
NumpadDel
NumpadDiv
NumpadMult
NumpadAdd
NumpadSub
NumpadEnter
F1 - F12

Frequently Asked Questions:
Q: Dropping boots doesnt work for me!
A: Be sure to check some things. You need to have graphic settings to HIGH (next version will add ability to change it), DO NOT change size of the window after bot will resize it. Dont forget also to have Trove Window activated (not minimalized, nor in background)

Q: Nothing happens when i press HotKey after launching bot
A: Did u configured HotKey correctly? Spell-check the hotkey if it is in my List of hotkeys. Bot was made and tested on win7 64bit and there it should work. For other systems, please post in the topic


Notes:

• If you use version WITH auto-drop of boots, you must have WINDOWED setting. DO NOT change ur resolution after launch of bot
• Auto-Drop of boots works only when Trove window is in Foreground (cant be minimalized, nor behind other windows)
• Press ur desired hotkey (default: NumPad9) to Force-Close the bot (must press when Trove is active)
• To run bot multiple times, just copy-paste the version u want to use, and launch it second time (DO NOT launch all bots at once, without activating them with ur StartButton first)

Some words from author:
I do not, i repeat, i do not (!) provide source of the fishing bot.
If you dont like it, dont use it.
There are plenty of other bots with similar functions as mine, so if u dont like it ...

Known Bugs:

• (fix'd) When u close the window of Trove, without closing the bot first (with NumPad9) you will have to close it via tray icon
• (moderate) Bot can glitch when on 2 or more Trove windows, in the same exact moment - Boot will drop.
• (moderate) Some people say that it doesnt work for Win8 (can't confirm and can't help u with that)

To do:

• (priority) Make one executable bot, with ability to launch many bots without copying the initial file
• Pop in some ideas!

 

Trove Window:


Boots AutoDrop (sometimes glitchy but should mostly work):


Settings Window (later gonna make it look nicer, functionality first ;p)

 

29.07.2015

• Fixd Trove window finding (my bad, im stupid and was tired yesterday)
• Bot will now close when u close Trove window

28.07.2015

• 1 exe file to launch 1 bot
• Settings screen + file (each for each bot)
• Simple fixes to boot-rotation bugs
• Fixed showing errors when it was all fine ;p
• For now, checking for boots, will be every second, instead of every item fished.

26.07.2015:

• Fixed major bug with multiclient and autodrop of boots
• Some improvements to speed-up boot searching process
• Added RandSleep functions, just more for protection if there's any bot-scanner in trove
• Added 32/64bit versions + some tooltip cosmetics

Virus Scans:

Jotti Scan finished. 0/21 scanners reported malware.
VirusTotal Detection ratio: 2 / 55

 

28.07.2015
Jotti Scan finished. 0/21 scanners reported malware.
VirusTotal Detection ratio: 2 / 55

26.07.2015
Jotti Scan finished. 0/21 scanners reported malware.
VirusTotal Detection ratio: 2 / 55

25.07.2015
VirusTotal Detection ratio: 2 / 55 (have no idea why there is 2, but as i said already, if u dont trust, just dont use it)
Jotti Scan finished. 0/21 scanners reported malware.

[qztr]

Can't wait for this, thanks for keeping it updated.

Edit: Regarding the harmless, numpad9 stuff can simply be fixed by adding an if statement.

If Trove.exe exist = true then
Do Nothing()
Else
Kill(botexecutable.exe)
End If


Probably the wrong language, haven't programmed in AHK(Assuming your bot is made in AHK) so I wouldn't know.

[Feardex]

Where is the attachment?

[qztr]

Where is the attachment?

Reading the first 3 lines of the thread is hard, isn't it?

[Poorloading]

cant wait in-till this is released . by any chance is this switchable between one boot drop and all boot drop ?

[konradmm]

Can't wait for this, thanks for keeping it updated.

Edit: Regarding the harmless, numpad9 stuff can simply be fixed by adding an if statement.

If Trove.exe exist = true then
Do Nothing()
Else
Kill(botexecutable.exe)
End If


Probably the wrong language, haven't programmed in AHK(Assuming your bot is made in AHK) so I wouldn't know.

that was my first idea.
What if u exit 1 trove window?
there will be (for example) still 1+ window active, so bot binded to the one that waas closed, won't turn off ;p

I was tryin to do something like:

If !ProcessExist(%pid%)
...
ProcessExist(Name){
	Process,Exist,%Name%
	return Errorlevel
}

But somehow it doesnt work for process id.
Will test it later

cant wait in-till this is released . by any chance is this switchable between one boot drop and all boot drop ?

Spoiler alert!


p.s. later will make this look beautiful, now i want it fast update and release

[Romochild]

Sounds like this will be amazing. I apologize for my stupidity but I have to ask this question: "(new) Bot configuration: change-able hotkey, different configs for multiple bots" This means you will be able to multiclient and fishbot on all clients? Just wondering. Also, to bot on the clients will we have to: Open Trove, Open bot, Open next trove, open next bot, and repeat? or how would we load the bot into the clients?

Thanks

[konradmm]

Sounds like this will be amazing. I apologize for my stupidity but I have to ask this question: "(new) Bot configuration: change-able hotkey, different configs for multiple bots" This means you will be able to multiclient and fishbot on all clients? Just wondering. Also, to bot on the clients will we have to: Open Trove, Open bot, Open next trove, open next bot, and repeat? or how would we load the bot into the clients?

Thanks

unfortunately im not as good programmer as Isaku who made multi-client loader.
This is plain bot, which u will need to "activate" for every game client u launch.
Mby later

P.s. i started AHK like 1-1.5 weeks ago, so still much to learn, but will provide new solutions in this bot for sure

[Romochild]

unfortunately im not as good programmer as Isaku who made multi-client loader.
This is plain bot, which u will need to "activate" for every game client u launch.
Mby later

P.s. i started AHK like 1-1.5 weeks ago, so still much to learn, but will provide new solutions in this bot for sure

How would we go upon doing this? Just wondering if I will need to supply a VM for each client or if I will be able to just Multibot on one VM and load the bot on each client (as in opening one client at a time).

Thanks

[konradmm]

How would we go upon doing this? Just wondering if I will need to supply a VM for each client or if I will be able to just Multibot on one VM and load the bot on each client (as in opening one client at a time).

Thanks

When ure in Glyph logged in on (ie. mybot1) u press PLAY button.
When trove launches, u can switch back to Glyph, Logout, Login to ie. mybot2 and u can press PLAY again to launch second Trove

Any ideas so far? Not sure what to add now

[Romochild]

When ure in Glyph logged in on (ie. mybot1) u press PLAY button.
When trove launches, u can switch back to Glyph, Logout, Login to ie. mybot2 and u can press PLAY again to launch second Trove

Any ideas so far? Not sure what to add now

Ah, I haven't used anything from you or anyone yet haha so I didn't know how to do anything. Thank you for clarifying though

Thanks

[Ghaly]

Can't wait!
Thanks for sharing dude!

[Pardieiro]

Can't wait for the release! Thanks for keep us rich.

[konradmm]

is the fishing bot work now?
i have some problem after update

After EVERY UPDATE, base addresses (and/or) pointers are changed, so someone who know how to find it, need to find it first ;D
So basically, after EVERY UPDATE of TROVE, there is NEED of BOT UPDATE as well

[3ady]

Thanks for sharing !