w1zware AHK Multiscript [DOPE SCRIPT]

[userchetomainak]

Before everything i didnt made this script. All credits to my friend (Bluce) who created and let me share this script with ya. (He doesnt have account on mpgh account though or i didnt found it idk)

So this script has:
•Bunnyhop- Jumps as soon as you hit the ground to gain speed. Works best on 64 tick servers and flat surfaces.
•AutoStrafe- Automatically strafes left and right when you move the mouse left and right.
•Triggerbot- Shoots as soon as a pixel changes in your crosshair. Optional settings: sensitivity, delay, pause
•SmartTriggerbot- Shoots as soon as an enemy enters your line of sight. Based on the radar rather than pixel detection.
•AutoFire- Use with pistols to spam fire them. Optional settings: delay
•NoRecoil- Automatically compensates for the recoil of certain weapons. Optional settings: weapon
•Aimbot- Automatically aims at the horizontal position of enemies based on the radar. It will lock onto enemies through walls if your teammate spots them. Looks somewhat natural in spectator view/demos. Optional settings: FOV, lock speed, trace speed, delay, offset, smooth, mode (normal, snap, silentaim)
•AntiAim/Spinbot- (epilepsy warning lol) Makes you difficult to shoot in the head (bypasses Overwatch as far as I know, but be careful). You can still see where you're actually aiming, and you can still move around and shoot. Optional settings: mode (down + 360, 360, random, updown)
•ChatSpam- Spams chat with up to 10 custom messages. Optional settings: delay, random
•ZeusGlitch- Shoots a taser bolt as a tracer (not visible client-side, only to other players).
•BuyBinds- Automatically buys weapons at the start of the round(no console commands needed).
•LagSwitch- Disconnects CS:GO from the internet via firewall, useful for peeking around corners and seeing an enemy before they see you.

•GUI- Simple and easy way to turn on/off cheats and change settings.
•InputBox- Type in the cheats you want to turn on/off, also useful for fine-tuning settings.
•Toggleable cheats- To toggle on a cheat (opposed to having to hold down the respective key) press Left Alt + [key to use cheat] to toggle it on or off.
•Profiles- Two custom profiles, and a legit and rage profile. Customizable sensitivity and hotkeys available as well.

How to install and use:
•Close CSGO if it's open
•Download the .rar file
•Use WinRar to extract the first folder you encounter when opening the .rar file to the Desktop or Downloads without changing any file names
•Open up the folder and run the .ahk file
•You need to type the following radar commands in console for some features to work:
cl_radar_scale 1
cl_radar_icon_scale 1
cl_radar_always_centered 1
cl_radar_rotate 1
•Make sure to run CSGO in Fullscreen Windowed mode.

FAQ
•Is this really VAC secure?
Yes, one of the main purposes of this script is to be 100% VAC undetected. It never reads or writes to CS:GO memory, so you're untouchable by VAC. I'm not responsible for any Overwatch bans though, so be careful.
•How reliable is this script as a cheat?
Some features may not be perfect, but they do give you a huge upper hand. It is up to par with many hacks out there, but you will probably get destroyed in most HvH servers (obviously).

Virustotal:
https://www.virustotal.com/nl/file/4...is/1495480416/

[vaLixy]

looking forward to this and to actually see if it doesn't read/write memory.

[aku]

Looks good, let's wait

[Ally]

looking forward to this and to actually see if it doesn't read/write memory.

It does. You won't be able to change your angles without reading and writing memory

[-Panda-]

Good release.

[Royce]

sorry for the wait.

//Approved , post back results

[userchetomainak]

It does. You won't be able to change your angles without reading and writing memory

It is a script so it should not read/write memory

- - - Updated - - -

Good release.

Thanks
//2short

[llsocrd]

When I try running the script it says
Error: Paramater #2 invalid.

Sepcifically:tab 3
Line#570 until line 578.

Why does this comeup and how do i fix it? Thanks

[renegadesbish]

When I try running the script it says
Error: Paramater #2 invalid.

Sepcifically:tab 3
Line#570 until line 578.

Why does this comeup and how do i fix it? Thanks

probably should've added the full part of the script where the error is coming from:

gui, 1:add, text, x710 y245, Zoom Sensitivity:
gui, 1:font, cffff70
gui, 1:add, text, x805 y155, %A_ScreenWidth%x%A_ScreenHeight%
gui, 1:add, text, x805 y185, %steamid%
gui, 1:add, text, x805 y215, %sensitivity%
gui, 1:add, text, x855 y245, %zoom_sensitivity%

gui, 1:font, cff8989
gui, 1:add, tab3, x5 y5 w675 h675 vgui_tab, Combat|Player|Misc|

[userchetomainak]

When I try running the script it says
Error: Paramater #2 invalid.

Sepcifically:tab 3
Line#570 until line 578.

Why does this comeup and how do i fix it? Thanks

First time hearing about this problem.

[llsocrd]

I downloaded it, extracted it to my desktop, ran the .ahk and this error came up. I've tried twice.

- - - Updated - - -

First time hearing about this problem.

I've done everything according to what you've provided but nothing.

[xextinction]

I get an error asking me to place the config folder on desktop or downloads folder.
My OS is in C drive and all my other stuffs are in D drive.
Any ideas how to change the default path of the config folder.

[userchetomainak]

I downloaded it, extracted it to my desktop, ran the .ahk and this error came up. I've tried twice.

- - - Updated - - -



I've done everything according to what you've provided but nothing.

Hmm im sorry to hear that. Can't do nothing about this cause im not the main creator of this. The problem is not in the script 99% cause its working for me and prob for other users!

My recommendation is to download my own multiscript.. it has smaller things but it should work for you since i've created and i know there's no bugs.

- - - Updated - - -

I get an error asking me to place the config folder on desktop or downloads folder.
My OS is in C drive and all my other stuffs are in D drive.
Any ideas how to change the default path of the config folder.

Just make a folder where's everything 'bout the script and start it. It should start.

[llsocrd]

Hmm im sorry to hear that. Can't do nothing about this cause im not the main creator of this. The problem is not in the script 99% cause its working for me and prob for other users!

My recommendation is to download my own multiscript.. it has smaller things but it should work for you since i've created and i know there's no bugs.

- - - Updated - - -



Just make a folder where's everything 'bout the script and start it. It should start.

I figured it out, apparently "tab3' was meant to have a "." inbetween the tab and 3. Thanks for the help!

[Ally]

It is a script so it should not read/write memory

- - - Updated - - -



Thanks
//2short

You clearly don't know Jack shit about scripts