[X32.0.2] 059 client

**059** · 09-29-2019

If you have bad fps with this on flash player 18, try the latest flash player 30, or unplug a playstation controller if you have one connected. The cause has been found but I didn't have the fix ready by the time deca released this update. Non xbox controllers plugged into usb cause mega lag, sorry.

Famebot stuff:
Check the options under Fame options. Explanation of the Fame options:
Distance Threshold: the distance from each player to include in the density calculation (it loops through each player, then loops through each player again and checks which player is under this distance from the outer loop player, if they're under the threshold then it counts)
Offset from Center: how far away from the center (calculated above^), in the direction others are moving
Tele Distance: how far away from the center until you teleport to the center
Fame Point Offset: randomly, your player will walk away from the center in each direction, the distance away from the center is multiplied by this number - this is to prevent multiple people from looking stacked on top of each other if they're botting - INCREASE THIS IF YOU LOOK STACKED ON TOP - ALSO INCREASE IF YOU'RE GETTING STUCK ON ROCKS (1.0 is good)
Walk back to Train legit: makes it so you don't reconnect immediately back to the realm, instead you will walk to the realm portal and wait until it opens
Disclaimer: YOU CAN GET BANNED FOR FAMEBOTTING, BE WARNED! It has happened and it can happen to you. I added randomization to avoid detection, but it's not a guarantee. The way you get banned is by other people recording you and spending the time to figure out who is botting and who isn't.

To set a new fame train realm portal type /fameportal, otherwise just turn famebot on and walk to a portal to set it the first time.

Changes (last) build:
- Fixed nexus news/seasonal UI alignment

- Login to Steam or Kongregate accounts - the Secret on the login menu is for these types of accounts, if you paste in the secret like what muledump uses, it will login to your Steam/Kongregate account and you can play normally
- Custom sound effects - white bag drop notifier, dungeon dinger for when people open keys, private message notification
- A lot of performance optimizations, this client should run a lot smoother than normal and also use less memory
- Custom Stats Monitor shows ping too (taking suggestions as for where to put this, it currently covers up rank in the top left), shows FPS, LATency, and MEMory usage
- Fame options to avoid losing fame bonuses
- Debuff ignoring like normal, except ignoring server debuffs (in red) shows you how many you've ignored - threshold is at 25, it will stop blocking them after so you don't dc from the server
- Auto Ability has been completely seperated from Auto Aim, they are independent of each other
- Loot preview showing item icons over bags
- Auto Responder for Thessal/Cem/Sewers (no Lod for now)
- Has custom timers for boss phases, if you click on it it says the timer in chat so be careful, you can set your own timer with /timer 120 for 2 minutes or /timer 2:00, also some of the marble colossus phases are wrong - if you have proper phases (chat message that the boss says and the number of seconds the phase lasts) enter them here and I'll include it, this goes for any boss
- Number of enemies left in dungeon, during events, is not shown in chat but is displayed on the screen below the timer area
- Reverse cultist staff and make etherite shoot straight and fix colossus sword.
- List keys in player's inventories
- Typing /realm <name> will keep joining a random realm until you get into that realm, so type /realm cyc for Cyclops
- Vault Only mode, check it on the main menu to make it so you never join Nexus, ever
- Low CPU mode hotkey, disables a LOT of stuff, including enemy shots and aoe bombs
- Questbar, shows quest hp, could use some improvement
- Show damage dealt to enemy under their sprite
- Good autonexus, with seal heals and everything, it should only very rarely desync, no guarantees as usual, it is possible to die with it and it has happened, avoid playing in laggy servers. There's a hotkey to manually reset HP and an option to automatically reset if it gets too far off.
- Teleport to self, useful for anything where you need 1 second of invulnerability, great for parasite den and other shit
- Auto claim daily login
- Language strings and all sounds are embedded in the client to reduce bandwidth, but at the cost of making the client an extra ~4 mb

Screenshot:

Virus Scans:
https://www.virustotal.com/gui/file/...459c/detection
https://virusscan.jotti.org/en-US/fi...job/98ul5z4540

**Danny** · 09-29-2019

//Approved

**Danny** · 09-29-2019

Originally Posted by bigdaddyowo

We already missed 2 days of the tomb event, jesus christ.

Go make your own client???

**Midnightmaniac** · 09-29-2019

Says too many login attemps

**DINTELBOTS** · 09-29-2019

Thank you for making the client @059 I love you for updating the client every time!
Thank you Joe for approving the client with short notice!

**Juanmeh** · 09-29-2019

I can't swap from best server, what can i do?

**MrFenFTW** · 09-29-2019

Is there a reason I can't swap servers?

- - - Updated - - -

UsEast is dead rn, huh.

**tarohunter** · 09-29-2019

Thanks man! u are the best and the only one

**xunknownhostx** · 09-29-2019

Get well 059, also thanks @Joe.

For others having issues with swapping from best server on event it's because there's different asset connections that has been changed, for a quick fix yourself I'll guide you step by step since 059 is feeling bad right now, I've been working with the client myself and updating it myself but since he released one I don't need to make a thread, for now. (All credit goes to him of course).

However here's a quick fix for not being able to swap from (BEST SERVER):

Step 1: Download & Thanks @059 SWF file from this thread.
Step 2: Download JPEXS Flash Editor, it's free and you won't hassle with licenses etc. Simply google then type JPEXS, it's your first link, and it will bring you directly to the download website.
Step 3: After you downloaded and installed JPEXS, go ahead and launch it, then open up the SWF file from the interface button on the upper left corner that says OPEN with a folder icon.
Step 4: After the client is done opening, you will notice a set of folders to your left, locate "Scripts" which is the last folder, double click it to open it in a drop down fashion or click simply the "+".
Now open the kabam>rotmg>servers>api.
Step 5: When you've reached the api folder and opened it, you will see 3 different AS3 Scripts (Action 3 Scripts) Don't worry about the technicality of these for now, simply click on "Server".

Now in the middle there should be a text field that shows the script, don't worry if you know nothing about scripting this isn't an issue, simply just locate the line that says:

Code:

      public var isAdminOnly:Boolean;
      
      public function Server()
      {

Notice the "public function server()"
Then below it there's bunch of text that describes servers and so on, what you want to do is:

Step 6: If you look down of the text field where the script is, there should be an interactive button that says: "Edit Actionscript (Exprimental)", click on that and click OK for any future dialog that appears.

Now simply mark the text from

Code:

public function Server()

to

Code:

         super();
      }

, which should be at the end of where the servers are listed. And it should look like this:

Code:

      public function Server()
      {
         serverAbbreviations = [];
         serverAbbreviations["usw3"] = "USWest3";
         serverAbbreviations["usw2"] = "USWest2";
         serverAbbreviations["usw"] = "USWest";
         serverAbbreviations["ussw"] = "USSouthWest";
         serverAbbreviations["uss3"] = "USSouth3";
         serverAbbreviations["uss2"] = "USSouth2";
         serverAbbreviations["uss"] = "USSouth";
         serverAbbreviations["usnw"] = "USNorthWest";
         serverAbbreviations["usmw2"] = "USMidWest2";
         serverAbbreviations["usmw"] = "USMidWest";
         serverAbbreviations["use3"] = "USEast3";
         serverAbbreviations["use2"] = "USEast2";
         serverAbbreviations["use"] = "USEast";
         serverAbbreviations["euw2"] = "EUWest2";
         serverAbbreviations["euw"] = "EUWest";
         serverAbbreviations["eusw"] = "EUSouthWest";
         serverAbbreviations["eus"] = "EUSouth";
         serverAbbreviations["eun2"] = "EUNorth2";
         serverAbbreviations["eun"] = "EUNorth";
         serverAbbreviations["eue"] = "EUEast";
         serverAbbreviations["ase"] = "AsiaSouthEast";
         serverAbbreviations["ae"] = "AsiaEast";
         serverAbbreviations["aus"] = "Australia";
         serverAbbreviations["au"] = "Australia";
         super();
      }

Now that you have all that marked, simply copy and paste this code, and replace that one with:

Code:

           public function Server()
      {
         serverAbbreviations = [];
         serverAbbreviations["proxy"] = "Proxy";
         serverAbbreviations["caus"] = "CAustralia";
         serverAbbreviations["case"] = "CAsiaSouthEast";
         serverAbbreviations["cusw"] = "CUSWest";
         serverAbbreviations["cusmw"] = "CUSMidWest";
         serverAbbreviations["ceuw"] = "CEUWest";
         serverAbbreviations["ceue"] = "CEUEast";
         serverAbbreviations["cuss"] = "CUSSouth";
         serverAbbreviations["cuse"] = "CUSEast";
         serverAbbreviations["ceun"] = "CEUNorth";
         serverAbbreviations["usw3"] = "USWest3";
         serverAbbreviations["usw2"] = "USWest2";
         serverAbbreviations["usw"] = "USWest";
         serverAbbreviations["ussw"] = "USSouthWest";
         serverAbbreviations["uss3"] = "USSouth3";
         serverAbbreviations["uss2"] = "USSouth2";
         serverAbbreviations["uss"] = "USSouth";
         serverAbbreviations["usnw"] = "USNorthWest";
         serverAbbreviations["usmw2"] = "USMidWest2";
         serverAbbreviations["usmw"] = "USMidWest";
         serverAbbreviations["use3"] = "USEast3";
         serverAbbreviations["use2"] = "USEast2";
         serverAbbreviations["use"] = "USEast";
         serverAbbreviations["euw2"] = "EUWest2";
         serverAbbreviations["euw"] = "EUWest";
         serverAbbreviations["eusw"] = "EUSouthWest";
         serverAbbreviations["eus"] = "EUSouth";
         serverAbbreviations["eun2"] = "EUNorth2";
         serverAbbreviations["eun"] = "EUNorth";
         serverAbbreviations["eue"] = "EUEast";
         serverAbbreviations["ase"] = "AsiaSouthEast";
         serverAbbreviations["ae"] = "AsiaEast";
         serverAbbreviations["aus"] = "Australia";
         serverAbbreviations["au"] = "Australia";
         super();
      }

If you are new to scripting or text editing etc, make sure you follow these steps closely and do not mess up what you should mark and replace.

Step 7: After you are done replacing by copy+paste, click save and OK on any future dialog that appears (The save button should appear right beside where the Edit Actionscript was).

Now that you are successfully done, congratulations, you've changed a script by your own! Now let's export the client as an SWF.

Navigate to your upper left corner where it says "Save as..." a bit to the right of "Open" the folder we begun with, simply click it, then choose a name for your SWF (I recommend not overwriting 059's client, make a new name, so you can have that one as a backup), and you're done! Open the new client connect to the game (Doesn't matter what server you connect to), simply enter Nexus on best server.

Now this is where you will use the command ingame called

Code:

/con

To connect to different servers all you need to do is type /con "serverabbrevation" in the chat.

For EXAMPLE: If you want to connect to CEUWest you'd type /con ceuw in the chat, click enter and it should connect you instantly, if you want to connect to CUSEast, simple again

Code:

/con cuse

Here's the list of abbrevations for their each and their own servers:

Code:

                  caus = "CAustralia";
         case = "CAsiaSouthEast";
         cusw = "CUSWest";
         cusmw = "CUSMidWest";
         ceuw = "CEUWest";
         ceue = "CEUEast";
         cuss = "CUSSouth";
         cuse = "CUSEast";
         ceun = "CEUNorth";

Enjoy and have fun

**Juanmeh** · 09-29-2019

Thank you guys!

**ROTMG Expert** · 09-30-2019

Thanks helped me alot

- - - Updated - - -

Originally Posted by xunknownhostx

Get well 059, also thanks @Joe.

For others having issues with swapping from best server on event it's because there's different asset connections that has been changed, for a quick fix yourself I'll guide you step by step since 059 is feeling bad right now, I've been working with the client myself and updating it myself but since he released one I don't need to make a thread, for now. (All credit goes to him of course).

However here's a quick fix for not being able to swap from (BEST SERVER):

Step 1: Download & Thanks @059 SWF file from this thread.
Step 2: Download JPEXS Flash Editor, it's free and you won't hassle with licenses etc. Simply google then type JPEXS, it's your first link, and it will bring you directly to the download website.
Step 3: After you downloaded and installed JPEXS, go ahead and launch it, then open up the SWF file from the interface button on the upper left corner that says OPEN with a folder icon.
Step 4: After the client is done opening, you will notice a set of folders to your left, locate "Scripts" which is the last folder, double click it to open it in a drop down fashion or click simply the "+".
Now open the kabam>rotmg>servers>api.
Step 5: When you've reached the api folder and opened it, you will see 3 different AS3 Scripts (Action 3 Scripts) Don't worry about the technicality of these for now, simply click on "Server".

Now in the middle there should be a text field that shows the script, don't worry if you know nothing about scripting this isn't an issue, simply just locate the line that says:

Code:

      public var isAdminOnly:Boolean;
      
      public function Server()
      {

Notice the "public function server()"
Then below it there's bunch of text that describes servers and so on, what you want to do is:

Step 6: If you look down of the text field where the script is, there should be an interactive button that says: "Edit Actionscript (Exprimental)", click on that and click OK for any future dialog that appears.

Now simply mark the text from

Code:

public function Server()

to

Code:

         super();
      }

, which should be at the end of where the servers are listed. And it should look like this:

Code:

      public function Server()
      {
         serverAbbreviations = [];
         serverAbbreviations["usw3"] = "USWest3";
         serverAbbreviations["usw2"] = "USWest2";
         serverAbbreviations["usw"] = "USWest";
         serverAbbreviations["ussw"] = "USSouthWest";
         serverAbbreviations["uss3"] = "USSouth3";
         serverAbbreviations["uss2"] = "USSouth2";
         serverAbbreviations["uss"] = "USSouth";
         serverAbbreviations["usnw"] = "USNorthWest";
         serverAbbreviations["usmw2"] = "USMidWest2";
         serverAbbreviations["usmw"] = "USMidWest";
         serverAbbreviations["use3"] = "USEast3";
         serverAbbreviations["use2"] = "USEast2";
         serverAbbreviations["use"] = "USEast";
         serverAbbreviations["euw2"] = "EUWest2";
         serverAbbreviations["euw"] = "EUWest";
         serverAbbreviations["eusw"] = "EUSouthWest";
         serverAbbreviations["eus"] = "EUSouth";
         serverAbbreviations["eun2"] = "EUNorth2";
         serverAbbreviations["eun"] = "EUNorth";
         serverAbbreviations["eue"] = "EUEast";
         serverAbbreviations["ase"] = "AsiaSouthEast";
         serverAbbreviations["ae"] = "AsiaEast";
         serverAbbreviations["aus"] = "Australia";
         serverAbbreviations["au"] = "Australia";
         super();
      }

Now that you have all that marked, simply copy and paste this code, and replace that one with:

Code:

      public function Server()
      {
         serverAbbreviations = [];
         serverAbbreviations["proxy"] = "Proxy";
         serverAbbreviations["cusw"] = "CUSWest";
         serverAbbreviations["cusmw"] = "CUSMidWest";
         serverAbbreviations["ceuw"] = "CEUWest";
         serverAbbreviations["ceue"] = "CEUEast";
         serverAbbreviations["cuss"] = "CUSSouth";
         serverAbbreviations["cuse"] = "CUSEast";
         serverAbbreviations["ceun"] = "CEUNorth";
         serverAbbreviations["usw3"] = "USWest3";
         serverAbbreviations["usw2"] = "USWest2";
         serverAbbreviations["usw"] = "USWest";
         serverAbbreviations["ussw"] = "USSouthWest";
         serverAbbreviations["uss3"] = "USSouth3";
         serverAbbreviations["uss2"] = "USSouth2";
         serverAbbreviations["uss"] = "USSouth";
         serverAbbreviations["usnw"] = "USNorthWest";
         serverAbbreviations["usmw2"] = "USMidWest2";
         serverAbbreviations["usmw"] = "USMidWest";
         serverAbbreviations["use3"] = "USEast3";
         serverAbbreviations["use2"] = "USEast2";
         serverAbbreviations["use"] = "USEast";
         serverAbbreviations["euw2"] = "EUWest2";
         serverAbbreviations["euw"] = "EUWest";
         serverAbbreviations["eusw"] = "EUSouthWest";
         serverAbbreviations["eus"] = "EUSouth";
         serverAbbreviations["eun2"] = "EUNorth2";
         serverAbbreviations["eun"] = "EUNorth";
         serverAbbreviations["eue"] = "EUEast";
         serverAbbreviations["ase"] = "AsiaSouthEast";
         serverAbbreviations["ae"] = "AsiaEast";
         serverAbbreviations["aus"] = "Australia";
         serverAbbreviations["au"] = "Australia";
         super();
      }

If you are new to scripting or text editing etc, make sure you follow these steps closely and do not mess up what you should mark and replace.

Step 7: After you are done replacing by copy+paste, click save and OK on any future dialog that appears (The save button should appear right beside where the Edit Actionscript was).

Now that you are successfully done, congratulations, you've changed a script by your own! Now let's export the client as an SWF.

Navigate to your upper left corner where it says "Save as..." a bit to the right of "Open" the folder we begun with, simply click it, then choose a name for your SWF (I recommend not overwriting 059's client, make a new name, so you can have that one as a backup), and you're done! Open the new client connect to the game (Doesn't matter what server you connect to), simply enter Nexus on best server.

Now this is where you will use the command ingame called

Code:

/con

To connect to different servers all you need to do is type /con "serverabbrevation" in the chat.

For EXAMPLE: If you want to connect to CEUWest you'd type /con ceuw in the chat, click enter and it should connect you instantly, if you want to connect to CUSEast, simple again

Code:

/con cuse

Here's the list of abbrevations for their each and their own servers:

Code:

         cusw = "CUSWest";
         cusmw = "CUSMidWest";
         ceuw = "CEUWest";
         ceue = "CEUEast";
         cuss = "CUSSouth";
         cuse = "CUSEast";
         ceun = "CEUNorth";

Enjoy and have fun

THanks Helped me alot...

**thisisnotme6969** · 09-30-2019

pretty sure u forgot ASE and AUS, but its not that hard to add if u understand the code

**xunknownhostx** · 09-30-2019

Originally Posted by thisisnotme6969

pretty sure u forgot ASE and AUS, but its not that hard to add if u understand the code

No didn't forget them, but they're pretty useless and pointless to add, because they're unpopulated in the event and made no sense to add them

Edit:

Anywho, for those who wants these servers:

Code:

      public function Server()
      {
         serverAbbreviations = [];
         serverAbbreviations["proxy"] = "Proxy";
         serverAbbreviations["caus"] = "CAustralia";
         serverAbbreviations["case"] = "CAsiaSouthEast";
         serverAbbreviations["cusw"] = "CUSWest";
         serverAbbreviations["cusmw"] = "CUSMidWest";
         serverAbbreviations["ceuw"] = "CEUWest";
         serverAbbreviations["ceue"] = "CEUEast";
         serverAbbreviations["cuss"] = "CUSSouth";
         serverAbbreviations["cuse"] = "CUSEast";
         serverAbbreviations["ceun"] = "CEUNorth";
         serverAbbreviations["usw3"] = "USWest3";
         serverAbbreviations["usw2"] = "USWest2";
         serverAbbreviations["usw"] = "USWest";
         serverAbbreviations["ussw"] = "USSouthWest";
         serverAbbreviations["uss3"] = "USSouth3";
         serverAbbreviations["uss2"] = "USSouth2";
         serverAbbreviations["uss"] = "USSouth";
         serverAbbreviations["usnw"] = "USNorthWest";
         serverAbbreviations["usmw2"] = "USMidWest2";
         serverAbbreviations["usmw"] = "USMidWest";
         serverAbbreviations["use3"] = "USEast3";
         serverAbbreviations["use2"] = "USEast2";
         serverAbbreviations["use"] = "USEast";
         serverAbbreviations["euw2"] = "EUWest2";
         serverAbbreviations["euw"] = "EUWest";
         serverAbbreviations["eusw"] = "EUSouthWest";
         serverAbbreviations["eus"] = "EUSouth";
         serverAbbreviations["eun2"] = "EUNorth2";
         serverAbbreviations["eun"] = "EUNorth";
         serverAbbreviations["eue"] = "EUEast";
         serverAbbreviations["ase"] = "AsiaSouthEast";
         serverAbbreviations["ae"] = "AsiaEast";
         serverAbbreviations["aus"] = "Australia";
         serverAbbreviations["au"] = "Australia";
         super();
      }

Server abbreviations:

Code:

         caus = "CAustralia";
         case = "CAsiaSouthEast";
         cusw = "CUSWest";
         cusmw = "CUSMidWest";
         ceuw = "CEUWest";
         ceue = "CEUEast";
         cuss = "CUSSouth";
         cuse = "CUSEast";
         ceun = "CEUNorth";

**AntiPassive** · 09-30-2019

Note: If you have map hack enabled on rift, you'll get stuck at the start or Oryx's castle. Map hack doesn't work on rift in general.

**Sawfish** · 09-30-2019

thank you for sharing

Thread: [X32.0.2] 059 client

Thread Tools

Display

[X32.0.2] 059 client

The Following 229 Users Say Thank You to 059 For This Useful Post:

The Following 5 Users Say Thank You to Danny For This Useful Post:

The Following User Says Thank You to DINTELBOTS For This Useful Post:

The Following 6 Users Say Thank You to xunknownhostx For This Useful Post:

Similar Threads

[Outdated] [X32.0.1] 059 client

[Outdated] [X32.0.0] 059 client

Where can i find the update of the 059 client

059 Client DC

How to use Kongregate and Steam accounts on 059 client?