Free Public Valorant color Aimbot

[Nero666]

Features
Color Aimbot
Shot correction (Magnet)


Technical
This cheat is Internal/External type of a cheat built on top of the Interception drivers which Riot failed to block. Your mouse input is intercepted and the movement coordinates are "adjusted" to help you out. If you do not understand the Internal/External term, it means the cheat is external written as internal and therefore you can inject it into any process. Please note I took roughly 3 hours to write the features and the cheat as a whole so it is very rough around the edges. This is proof of concept that others should take as inspiration.

Compile the source yourself from the valorant master file using visual studio 2019

Instructions
1. Install the Interception driver ( i will not link this since it's against rules but it can be easily found using google}
2. Download the cheat (two .dll files)
3. Find an original way to inject the "inject me" dll into any 32-bit process - !DO NOT INJECT THE DLL INTO VALORANT!. I will not provide a tutorial on this, look up internal/external, You can use any decent injector
4. The interception.dll file needs to be in the appropriate folder according to how you inject, if you do not know what this means, put the interception.dll into a folder (for example C:/Interception) and add this folder into system PATH variable (google that)
5. If you did this correctly, a console will show up with "YES" written in it
6. Input your sensitivity, smoothing, and mode into the console, details are below
7. The console should disappear and you should be good to go
8. In-game, set colorblind mode to Purple
9. To disable the cheat, end the process you injected into

Injection
Never inject into Valorant or RIOT associated processes.
Do not inject if the game is running.
find your own way of injecting the dll somewhere.
The safety of the cheat relies heavily on the way you inject the dll, This is also why there isn't a tutorial where I say, inject it into this... Use your own injector that you find somewhere and then inject it into 32 bit process of your choice.

Console input
Input the values in the following order:
Sensitivity
Smoothing
Mode

Example:
0.52
0.1
3

Smoothing has reasonable values around 0.01-0.2 based on your CPU and setup. The mode has 3 values (1, 2, 3). 1 is for Shot correction only, 2 is for Color Aimbot only, 3 is for both.

Cheat status
UNDETECTED, but:
If you use a detected injector, you will be banned, of course, don't inject when the game is already running.
Please note that the detection might rely heavily on the way people inject the dll and therefore might have mixed comments

Compile the file yourself from sources.


Very basic pixel bot source with the interception driver setup. Since Vanguard does not use any preventive measurements, you can just modify the source code if you know a little bit of C/C++ and run the cheat as if it was never released here (Add some junk, modify some parts of the code, or just use the Interception base as setup). In order to compile this, you need to update link to Interception.lib file in the project settings (in Linker). The solution is for Visual Studio with Visual C++ installed. If you have any comments about the source, quote me, but lot of it was written quickly so there aren't really interesting concepts in there.

[satriakrn]

Features
AimAssist
Shot correction (Magnet)


Technical
This cheat is Internal/External type of a cheat built on top of the Interception drivers which Riot failed to block. Your mouse input is intercepted and the movement coordinates are "adjusted" to help you out. If you do not understand the Internal/External term, it means the cheat is external written as internal and therefore you can inject it into any process. Please note I took roughly 3 hours to write the features and the cheat as a whole so it is very rough around the edges. This is proof of concept that others should take as inspiration.

Compile the source yourself from the valorant master file using visual studio 2019

Instructions
1. Install the Interception driver ( i will not link this since it's against rules but it can be easily found using google}
2. Download the cheat (two .dll files)
3. Find an original way to inject the "inject me" dll into any 32-bit process - !DO NOT INJECT THE DLL INTO VALORANT!. I will not provide a tutorial on this, look up internal/external, You can use any decent injector
4. The interception.dll file needs to be in the appropriate folder according to how you inject, if you do not know what this means, put the interception.dll into a folder (for example C:/Interception) and add this folder into system PATH variable (google that)
5. If you did this correctly, a console will show up with "YES" written in it
6. Input your sensitivity, smoothing, and mode into the console, details are below
7. The console should disappear and you should be good to go
8. In-game, set colorblind mode to Purple
9. To disable the cheat, end the process you injected into

Injection
Never inject into Valorant or RIOT associated processes.
Do not inject if the game is running.
find your own way of injecting the dll somewhere.
The safety of the cheat relies heavily on the way you inject the dll, This is also why there isn't a tutorial where I say, inject it into this... Use your own injector that you find somewhere and then inject it into 32 bit process of your choice.

Console input
Input the values in the following order:
Sensitivity
Smoothing
Mode

Example:
0.52
0.1
3

Smoothing has reasonable values around 0.01-0.2 based on your CPU and setup. The mode has 3 values (1, 2, 3). 1 is for Shot correction only, 2 is for AimAssist only, 3 is for both.

Cheat status
UNDETECTED, but:
If you use a detected injector, you will be banned, of course, don't inject when the game is already running.
Please note that the detection might rely heavily on the way people inject the dll and therefore might have mixed comments

Compile the file yourself from sources.


Very basic pixel bot source with the interception driver setup. Since Vanguard does not use any preventive measurements, you can just modify the source code if you know a little bit of C/C++ and run the cheat as if it was never released here (Add some junk, modify some parts of the code, or just use the Interception base as setup). In order to compile this, you need to update link to Interception.lib file in the project settings (in Linker). The solution is for Visual Studio with Visual C++ installed. If you have any comments about the source, quote me, but lot of it was written quickly so there aren't really interesting concepts in there

isnt aim bot? just correctiong our aim fire right???

[Nero666]

isnt aim bot? just correctiong our aim fire right???

It's a color aimbot, so it will follow whichever color is assigned to it but it also has shot correction if you use either mode 1 or 3 .The default color is purple but the color can also be changed by modifying the source.

[MrS1]

link not work why?

[Nero666]

link not work why?

the attachment seems to be working on my end ,not sure why its not working for you though

[Mango Coconut]

Yeah the link doesn't work, is there a way for to get in contact with eachother

[[MPGH]Ahl]

Approved.

Post back results.

[Nero666]

link not work why?

Yeah the link doesn't work, is there a way for to get in contact with eachother

the files were pending approval, it should be working now

[Mango Coconut]

Where is the inject me dll in the zip file? i had extracted it (ik im stupid)

[ScarinfacT]

Hey there. I wanted to know if you've tested this in any kind of way.

[Nero666]

Where is the inject me dll in the zip file? i had extracted it (ik im stupid)

It's the dll2.sln file.You have to download visual studio 2019 with c++ installed and build the dll.

- - - Updated - - -

Hey there. I wanted to know if you've tested this in any kind of way.

I have been using it for some time without a ban and it works fine.Regardless,the cheat is very safe but as I said the safety relies on how you inject the dll and how well your able to modify the source.Though, with any public cheat there is always a possibility of it being detected in the future,so use at your own risk.

[Mango Coconut]

It's the dll2.sln file.You have to download visual studio 2019 with c++ installed and build the dll.

- - - Updated - - -




I have been using it for some time without a ban and it works fine.Regardless,the cheat is very safe but as I said the safety relies on how you inject the dll and how well your able to modify the source.Though, with any public cheat there is always a possibility of it being detected in the future,so use at your own risk.

For modifying the source code, do we add junk code? or does that not work anymore?

[Nero666]

For modifying the source code, do we add junk code? or does that not work anymore?

Using junk code is better than nothing.Though, changing some of the values would make it more safer than randomly inputting unintelligible code.

[Mango Coconut]

Using junk code is better than nothing.Though, changing some of the values would make it more safer than randomly inputting unintelligible code.

Alr, ty do i just edit the dllmain.cpp? in the source files? i never done c++ coding before but I had done some Java programming and proficient in it. Ill juist edit some code that i dont think iwll effect a lot lol

[Nero666]

Alr, ty do i just edit the dllmain.cpp? in the source files? i never done c++ coding before but I had done some Java programming and proficient in it. Ill juist edit some code that i dont think iwll effect a lot lol

Yeah just editing dllmain.cpp is fine.