How to use D3D hack.

[orangewarning]

Many people don't understand how to use the hack so i will try to help.
1. You must have the hack.
2. Extract the .dll file to desktop(anywhere will do actually)(turn off antivirus if needed)
3. Make sure you have an Injector. (If you don't have, go and find one in this forum that works for you. )
4.Run your injector as administrator
5. Put BlackShot(.exe, if required) in process.
6. Select Auto Inject and close after inject.
7. Select your .dll file(whereever you extracted)
8.Run your blackshot launcher as administrator( Garena Plus may work)
9. Log in
10. Start your blackshot
11. Your injector should close( Some will tell you successful) ( If no close, means fail to inject)
12. Now wait until Character Selection screen
13. Press END to show menu if its not already there
14. Use arrow up down to choose section
15. Use Arrow right to open section ( Use arrow left to close)
16. Likewise, Arrow right to on the option(EG. green cham) arrow left to off.
17. IMPORTANT!! After you finish Choosing your options, press END to close menu( IF YOU DON'T, YOUR SCREEN WILL BE ALL BLACK AND HARD TO SEE)
18. Now choose your character and enter.
19. ( If you somehow forget step 17, esc to get back to character selection)
20. Enjoy the hack.
Credits @davian000 for hack file.

---------- Post added at 04:42 PM ---------- Previous post was at 04:37 PM ----------

If anyone is faced with msvrc.dll problem or other .dll errors, it can be fixed by downloading this file : https://www.mpgh.net/forum/168-blacks...dont-have.html Credits to @hackwtf | refer to this post by davian : https://www.mpgh.net/forum/168-blacks...dll-paste.html for further info

[xyolord98]

if me use that hack . GM can detect ?

---------- Post added at 02:50 AM ---------- Previous post was at 02:50 AM ----------

that D3D undetect ?

[Arcton]

Use easyinject

[orangewarning]

if me use that hack . GM can detect ?

---------- Post added at 02:50 AM ---------- Previous post was at 02:50 AM ----------

that D3D undetect ?

currently it is undetected. and if u scared gm detect, there are tutorials on how to not let gm know you use the hack go search around
also, you can make your .dll undetected if it gets detected with this : https://www.mpgh.net/forum/164-combat...pe-cipher.html

---------- Post added at 05:57 PM ---------- Previous post was at 04:54 PM ----------

how to change the info to tutorial?? cos this is tutorial. @Vehrdyn

[Dash9231]

currently it is undetected. and if u scared gm detect, there are tutorials on how to not let gm know you use the hack go search around
also, you can make your .dll undetected if it gets detected with this : https://www.mpgh.net/forum/164-combat...pe-cipher.html

---------- Post added at 05:57 PM ---------- Previous post was at 04:54 PM ----------

how to change the info to tutorial?? cos this is tutorial. @Vehrdyn

Whats the link about? @@

[davian000]

nice tutorial

[mieranderson]

Oh haha before this my screen was black and i still get to play it.. but after using this step everything was fine and awesome! i love you so much.. thnk you!!!!!!!!!!!!!!!!!!!!!!!

[orangewarning]

Good that it works for you now

[Arcton]

You yourself say it's detected

[orangewarning]

You yourself say it's detected

it was injector problem just now, used another injector and no more detected message.

[lolman963]

i knowed that before

[orangewarning]

i knowed that before

just teaching other people who do not know.

[lolman963]

Yes this may help them

just teaching other people who do not know.

[mayority123]

please help me. i succes inject i got the D3D menu but the charm wont work. so help me pls

Many people don't understand how to use the hack so i will try to help.
1. You must have the hack.
2. Extract the .dll file to desktop(anywhere will do actually)(turn off antivirus if needed)
3. Make sure you have an Injector. (If you don't have, go and find one in this forum that works for you. )
4.Run your injector as administrator
5. Put BlackShot(.exe, if required) in process.
6. Select Auto Inject and close after inject.
7. Select your .dll file(whereever you extracted)
8.Run your blackshot launcher as administrator( Garena Plus may work)
9. Log in
10. Start your blackshot
11. Your injector should close( Some will tell you successful) ( If no close, means fail to inject)
12. Now wait until Character Selection screen
13. Press END to show menu if its not already there
14. Use arrow up down to choose section
15. Use Arrow right to open section ( Use arrow left to close)
16. Likewise, Arrow right to on the option(EG. green cham) arrow left to off.
17. IMPORTANT!! After you finish Choosing your options, press END to close menu( IF YOU DON'T, YOUR SCREEN WILL BE ALL BLACK AND HARD TO SEE)
18. Now choose your character and enter.
19. ( If you somehow forget step 17, esc to get back to character selection)
20. Enjoy the hack.
Credits @davian000 for hack file.

---------- Post added at 04:42 PM ---------- Previous post was at 04:37 PM ----------

If anyone is faced with msvrc.dll problem or other .dll errors, it can be fixed by downloading this file : https://www.mpgh.net/forum/168-blacks...dont-have.html Credits to @hackwtf | refer to this post by davian : https://www.mpgh.net/forum/168-blacks...dll-paste.html for further info

[orangewarning]

please help me. i succes inject i got the D3D menu but the charm wont work. so help me pls

im not the maker of the hack and i can only help you as much as i already have in the other thread