How to get wallhack/fullbright/crosshair working.

[roflnaga]

So I thought everyone had a working wallhack but I was just reading another post and apparently there are some people that are still without.
So here is my half ass tutorial on how to get wallhack working. I did not make this hack. I did not make the injector. Credits to whoever did. I am simply making the tutorial.

:XP USERS:
1.Download the files uploaded below.

2.Extract the files to a new folder on your desktop.

3.Go to your system32 folder (computer>local disk c:>windows>system32)

4.Find and COPY d3d9.dll and paste it into the new folder on your dektop(where you extracted the perx injector and the .dll file)

5.Open up perx and click the browse button, then select hack.dll and hit ok. click the browse button again and select the d3d9.dll that you copied from system32 folder and click ok. Make sure under what to inject that you have Engine.exe and that it injects automatically.

6.Start up CA, click game start, the injector should show the two .dll files being injected and then it should disappear. When you are at the login screen hit insert on your keyboard and a mini menu should pop up on the left hand corner of your screen, select the hacks you wish to use with the arrow keys on your key board (up,down scrolls through right,left turns them on and off)

The hacks I use are
wallhack- see through the walls
fullbright-everything is bright
crosshair-adds a crosshair to help with aiming

You can use colors but they will disconnect you after every 1 or 2 games. So its not really worth it.

:VISTA USERS:

1.Download the files uploaded below.

2.Extract the files to a new folder on your desktop.

3.Go to your system32 folder (computer>local disk c:>windows>system32)

4.Find and COPY d3d9.dll and paste it into the new folder on your dektop(where you extracted the perx injector and the .dll file)

5.Open up perx as ADMINISTRATOR and click the browse button, then select hack.dll and hit ok. click the browse button again and select the d3d9.dll that you copied from system32 folder and click ok. Make sure under what to inject that you have Engine.exe and that it injects automatically.

6.Start up CA as ADMINISTRATOR, click game start, the injector should show the two .dll files being injected and then it should disappear. When you are at the login screen hit insert on your keyboard and a mini menu should pop up on the left hand corner of your screen, select the hacks you wish to use with the arrow keys on your key board (up,down scrolls through right,left turns them on and off)

Basically the only thing different with vista users is you HAVE to run combat arms and perx as ADMINISTRATOR everytime you play. To make it easy just right click perx and go to compatibility and check the box that says run as admin. Do the same to your combat arms shortcut.

Having problems still???? Try running combat arms in compatibility mode for windows 95.

:NOT NEEDED BUT HELPS:

Since the wallhack doesnt change the color of the players it still may be hard to see them on some maps. Therefore you can go into your Combat Arms game folder (computer>local disk c:>nexon>combat arms>game) and move the file named TEXTURES.REZ into the folder named BGM, which is at the top of the game folder.

WHAT DOES THIS DO?
Simply turns everything in the map grey. Making it much easier to see everyone and go own some nagas.

Well I hope this helps.This is my first tutorial I have done. I am almost positive these are all the steps you need to do to get this hack working. If you still have problems please post what it is and I will try my best in helping you fix it.

[mastergeorge]

OMG U CANT BE FUKEN SERIOUS THAT THIS ONLY WORKS FOR WINDOWS XP SP2!!! SOMEONE BLOODY RECODE IT FOR EVERY1 THAT HAS SP 3 GOD DAMIT!!!!!!!!!!!!!!!!!

[arvinder]

I have vista and it works!! I already said, for vista, rename hack.dll to Skype.dll and follow the instructions OP said.

[DemonMonkey0]

THATS FOR GUNZ
the game

[lagarchadelmono4]

i have sp3 and it works.... just followed the "how to" guide.. the only thing that doesnt work are chams and no sky, rest works perfectly

[jamesmeup]

it crashes just before the log in screens appear

[yungc]

it d/c in the middle of the game

[Blac]

I can get it to work, but after maybe 5 minutes, the game crashes.

[livan101]

UMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
SOMEBODY SHOULD MAKE BETTER HACKS LIKE A NON WINDOW-MODE WALLHACK . but more like chams like the old mpgh pub :"D

[Blac]

Or at least fix the chams and wallhack on this hack..
Snow Valley is completely fucked up!!

[pangsta]

how do i turn on hacks like specific hacks for example wallhack is it insert? when ever i press instert the window pops out then i login and i go into a game and then i get dc while loading anyone know this situation?

[kizzme_not]

So I thought everyone had a working wallhack but I was just reading another post and apparently there are some people that are still without.
So here is my half ass tutorial on how to get wallhack working. I did not make this hack. I did not make the injector. Credits to whoever did. I am simply making the tutorial.

:XP USERS:
1.Download the files uploaded below.

2.Extract the files to a new folder on your desktop.

3.Go to your system32 folder (computer>local disk c:>windows>system32)

4.Find and COPY d3d9.dll and paste it into the new folder on your dektop(where you extracted the perx injector and the .dll file)

5.Open up perx and click the browse button, then select hack.dll and hit ok. click the browse button again and select the d3d9.dll that you copied from system32 folder and click ok. Make sure under what to inject that you have Engine.exe and that it injects automatically.

6.Start up CA, click game start, the injector should show the two .dll files being injected and then it should disappear. When you are at the login screen hit insert on your keyboard and a mini menu should pop up on the left hand corner of your screen, select the hacks you wish to use with the arrow keys on your key board (up,down scrolls through right,left turns them on and off)

The hacks I use are
wallhack- see through the walls
fullbright-everything is bright
crosshair-adds a crosshair to help with aiming

You can use colors but they will disconnect you after every 1 or 2 games. So its not really worth it.

:VISTA USERS:

1.Download the files uploaded below.

2.Extract the files to a new folder on your desktop.

3.Go to your system32 folder (computer>local disk c:>windows>system32)

4.Find and COPY d3d9.dll and paste it into the new folder on your dektop(where you extracted the perx injector and the .dll file)

5.Open up perx as ADMINISTRATOR and click the browse button, then select hack.dll and hit ok. click the browse button again and select the d3d9.dll that you copied from system32 folder and click ok. Make sure under what to inject that you have Engine.exe and that it injects automatically.

6.Start up CA as ADMINISTRATOR, click game start, the injector should show the two .dll files being injected and then it should disappear. When you are at the login screen hit insert on your keyboard and a mini menu should pop up on the left hand corner of your screen, select the hacks you wish to use with the arrow keys on your key board (up,down scrolls through right,left turns them on and off)

Basically the only thing different with vista users is you HAVE to run combat arms and perx as ADMINISTRATOR everytime you play. To make it easy just right click perx and go to compatibility and check the box that says run as admin. Do the same to your combat arms shortcut.

Having problems still???? Try running combat arms in compatibility mode for windows 95.

:NOT NEEDED BUT HELPS:

Since the wallhack doesnt change the color of the players it still may be hard to see them on some maps. Therefore you can go into your Combat Arms game folder (computer>local disk c:>nexon>combat arms>game) and move the file named TEXTURES.REZ into the folder named BGM, which is at the top of the game folder.

WHAT DOES THIS DO?
Simply turns everything in the map grey. Making it much easier to see everyone and go own some nagas.

Well I hope this helps.This is my first tutorial I have done. I am almost positive these are all the steps you need to do to get this hack working. If you still have problems please post what it is and I will try my best in helping you fix it.

LEECHED... AND PUT VIRUS SCAN >.<

[mastergeorge]

There is a virus scan..

Does this work for anyone?

[mcduder230]

Yah same thing happens to me it works but it disconnets

[sillyuniman]

So I thought everyone had a working wallhack but I was just reading another post and apparently there are some people that are still without.
So here is my half ass tutorial on how to get wallhack working. I did not make this hack. I did not make the injector. Credits to whoever did. I am simply making the tutorial.

:XP USERS:
1.Download the files uploaded below.

2.Extract the files to a new folder on your desktop.

3.Go to your system32 folder (computer>local disk c:>windows>system32)

4.Find and COPY d3d9.dll and paste it into the new folder on your dektop(where you extracted the perx injector and the .dll file)

5.Open up perx and click the browse button, then select hack.dll and hit ok. click the browse button again and select the d3d9.dll that you copied from system32 folder and click ok. Make sure under what to inject that you have Engine.exe and that it injects automatically.

6.Start up CA, click game start, the injector should show the two .dll files being injected and then it should disappear. When you are at the login screen hit insert on your keyboard and a mini menu should pop up on the left hand corner of your screen, select the hacks you wish to use with the arrow keys on your key board (up,down scrolls through right,left turns them on and off)

The hacks I use are
wallhack- see through the walls
fullbright-everything is bright
crosshair-adds a crosshair to help with aiming

You can use colors but they will disconnect you after every 1 or 2 games. So its not really worth it.

:VISTA USERS:

1.Download the files uploaded below.

2.Extract the files to a new folder on your desktop.

3.Go to your system32 folder (computer>local disk c:>windows>system32)

4.Find and COPY d3d9.dll and paste it into the new folder on your dektop(where you extracted the perx injector and the .dll file)

5.Open up perx as ADMINISTRATOR and click the browse button, then select hack.dll and hit ok. click the browse button again and select the d3d9.dll that you copied from system32 folder and click ok. Make sure under what to inject that you have Engine.exe and that it injects automatically.

6.Start up CA as ADMINISTRATOR, click game start, the injector should show the two .dll files being injected and then it should disappear. When you are at the login screen hit insert on your keyboard and a mini menu should pop up on the left hand corner of your screen, select the hacks you wish to use with the arrow keys on your key board (up,down scrolls through right,left turns them on and off)

Basically the only thing different with vista users is you HAVE to run combat arms and perx as ADMINISTRATOR everytime you play. To make it easy just right click perx and go to compatibility and check the box that says run as admin. Do the same to your combat arms shortcut.

Having problems still???? Try running combat arms in compatibility mode for windows 95.

:NOT NEEDED BUT HELPS:

Since the wallhack doesnt change the color of the players it still may be hard to see them on some maps. Therefore you can go into your Combat Arms game folder (computer>local disk c:>nexon>combat arms>game) and move the file named TEXTURES.REZ into the folder named BGM, which is at the top of the game folder.

WHAT DOES THIS DO?
Simply turns everything in the map grey. Making it much easier to see everyone and go own some nagas.

Well I hope this helps.This is my first tutorial I have done. I am almost positive these are all the steps you need to do to get this hack working. If you still have problems please post what it is and I will try my best in helping you fix it.

ya um can u link me the files that you said i need to upload plz? thanks sillyuniman

[sillyuniman]

can someone please tell me the files to upload and extract or w/e for the CA wall hack i really want this