ROGERO 4.30 CFW RELEASED WORKING PSN

[Alessandro10]

RIP SONY

[Denelf]

what are you talking about

[Justin]

RIP SONY

You know little to possibly nothing of what is going on in the console hacking scene

what are you talking about

He is talking about this:

PlayStation 3 Developer Rogero has updated his CFW to 4.30 v1.00 making another 4.30 CFW option. After E3's 4.30 cfw also released recently. This release comes as a Triple Pack that includes Rogero CEX-4.30 v1.00 CFW & compatibility for multiMAN ver 04.08.01 + Showtime 04.01.208. Keep a watch @ Rogero's Official Release thread via Tortuga-Cove for any changes before installing. RISK are involved with installing any new CFW. Use at your own risk and with caution if you do not have a Hardware Flasher to easily recover from a brick if one were to occur.



This CFW was tested on most PS3 Models by different testers and no problems were encountered.
But as any CFW release you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.

Rogero CEX-4.30 v1.00 Details
Compatibility problem with some PS3 models is now fully fixed.
XMB Icons problem from in-game PS button is now fixed. (Using the Patch included in the package: "PS3~dev_blind.zip")
PSN/SEN access is available as long as the current "passphrase" still the same.
Loading games from App_home Icon is now fixed.
It was tested by hundreds of testers on all PS3 models (FAT & Slim) and no problems were encountered.
It can run games signed with Keys up to version 4.30 without any Eboot/Sprx patching needed
Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).
Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21/4.30

ATTENTION:

1- This CFW doesn't have LV1 checks disabled and can't be installed on Downgraded PS3 consoles unless you have Dehashed/Reset Syscon Properly (if you're not sure about your PS3, Dehash it anyway to avoid any risk) Link ----> Dehashing Tutorial

2- Always make a NOR/Nand dump using multiMAN or memdump before installing any CFW to have a recovery backup in case of any bricks.
Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a way to recover (using hardware flashers) when you have a valid dump.
** A Hardware Flasher alone without a valid dump may not fix your bricked PS3 **

3- The QA flag must be always Enabled on your PS3 for safer upgrading/downgrading operations. Link ----> toggle_qa.pkg

4- Always use the Recovery Menu while installing this CFW to avoid possible bricks (XMB update works, but Recovery Menu is safer).

6- Please Check the MD5 of the downloaded PUP file before installing any CFW to avoid possible bricks.

7- DO NOT HAVE DISC IN PS3 WHEN UPDATING FIRMWARES..As the PS3 will take the UPDATE from the DISC First.

8- You need to already be on 3.55 to install this. Installing from any firmware other than 3.55 will simply not work

[Iron+]

Sony got hacked be4

[Justin]

Sony got hacked be4

You must differentiate between the Sony's Servers and Sony's Console/s but in any case, both have been hacked in the past.

[radnomguywfq3]

Cracked consoles interfacing with PSN D: ? Sounds like a disaster waiting to happen. Mind you, they don't charge for PSN so users really cannot complain.

[Justin]

Cracked consoles interfacing with PSN D: ? Sounds like a disaster waiting to happen. Mind you, they don't charge for PSN so users really cannot complain.

It's already begun! Although Sony can disable online access for CFW users at anytime by just changing the passphrase.