Request anything (hacks, code, addresses, structs...)

[gerherhtherherdhher]

Greetings,

some of you guys might have seen me ingame and it might have been a good or bad experience, depending on which team you were on. (Which also only holds true for the time prior to when I added team changing)

I would like to give something back to the MW2 community and I am motivated to do some reversing etc. The rules are simple, you can request anything, that includes cheats (internal only), code (structs, addresses, functions) or help with reversing & coding. Please don't make the requests to big so that I can get each request done in about half an hour. There might also be some stuff that I am not willing to share, but we'll see. I will probably also post the code for each hack I release here since there is always that one kid that reverses it.
Also please say if you're already banned in MW2 or not, because if you don't care about detection it will be way easier for me and you will get your hack quicker.

Oh and before I forget, I won't do external hacks.

-- Xen0

PS: I won't make anything for IW4x or v2, only Steam.

[dsa100]

can you made the end game exploit?and a force host hack.undetected

[CrypticMods]

Chopper Gunner ESP offset or if you can only activate it a certain way. And what this guy request. End game. ^^^^^

can you made the end game exploit?and a force host hack.undetected

[toxxicomanie]

is there a way we can host mod lobbys with the vac ban and vac bypass?
and can you do something against that annoying kicktool?

[CrypticMods]

is there a way we can host mod lobbys with the vac ban and vac bypass?
and can you do something against that annoying kicktool?

Ayria's tool might work. I'm still testing it. No one's joined my lobby yet. I think because my nat is strict. Edit: Ayria's tool with mw2 lobby tools

[toxxicomanie]

Ayria's tool might work. I'm still testing it. No one's joined my lobby yet. I think because my nat is strict. Edit: Ayria's tool with mw2 lobby tools

i did try that too but with DLC's turned on its not easy to find people. i used mw2 lt before my vac ban and even then with nat type open it took some time to get a lobby started... you found a way to turn off the DLC's ?
can i add you on steam?

[CrypticMods]

i did try that too but with DLC's turned on its not easy to find people. i used mw2 lt before my vac ban and even then with nat type open it took some time to get a lobby started... you found a way to turn off the DLC's ?
can i add you on steam?

I'll look into it this weekend. I think the source code got privated on ******

[gerherhtherherdhher]

I figured out that resetting your stats will make you find lobbies again. Since that's rather inconvinient I searched for something else and found 2 bytes in the stats that somehow relate to finding lobbies. Setting them to 0 will make you find lobbies again.

@CrypticMods I'll send you both the address for chopper esp and the cold blooded patch when I am home.

@dsa100 will post endgame code when I am home. If this gets out of hand I will also post code to block endgame. Only use it in lobbies that kick people.

@toxxicomanie I have a couple of ways to deal with hosts kicking people. The first one is to end the game, the second one is to crash the game and the third is to send the hosts IP in the chat which usually scares off the host. Furthermore the only way of hosting a lobby is winning a host migration. I do that occasionally and then host my all client mod menu.

[vforte]

You should make a trainer tool ingame kick tool, force host, add time, all the basic stuff for trickshot. I dont need eb tho. Also add public match editing thing. The game setup menu online.

[vladimirkm]

it would be great to have some simple undetcted wallhack in mw2
so if anyone can give me this i would be greatful

[toxxicomanie]

@__Xen0

what should this code do ?

*reinterpret_cast<int*>(0x0085CCC0) = 1;

I figured out that resetting your stats will make you find lobbies again. Since that's rather inconvinient I searched for something else and found 2 bytes in the stats that somehow relate to finding lobbies. Setting them to 0 will make you find lobbies again.

you mean resetting stats enables you to find lobbys after vacban or host after vacban? sorry im confused about to who you are responding

[XxMCxNUGGETxX]

If you have the time to make a new aimbot/walls/esp that would be dope all the ones ive been using are like 2 years old and kinda poo poo and i haven't seen a good one in a hot min. also im vac so i dont matter if detectable or nah. thanks in advance my dude your doing gods work

[DevinFSP]

Hey man, I think what you are doing here is great! I just have one possible cheat to ask for.

I recently got VAC banned, and I have been using a VAC-unban hack but it doesn't work that well. It's supposed to put me back into the pool of regular players but it's still taking forever (5's of minutes most of the time) to find a lobby. Are you able to make a new hack for this (if it is possible)?

Also, as a side note (if you're up for it), how would you recommend getting into modding MW2 and stuff. I just took a university course for C programming, and understand that we must find offsets for certain variables in the game and such to switch certain aspects on/off, but what is needed to delve deeper into the hacking-MW2-world?

[gerherhtherherdhher]

@__Xen0

what should this code do ?

*reinterpret_cast<int*>(0x0085CCC0) = 1;

you mean resetting stats enables you to find lobbys after vacban or host after vacban? sorry im confused about to who you are responding

That code will set your nat type to open but as mentioned earlier, I doubt that it has any actual effect. As far as I am concerned, not finding lobbies doesn't have anything to do with being VAC banned. That's the stats issue. The only limitation of the VAC bypass is that you can't "create" a new, valid lobby (id?), unless taking one over from the host via host migration.

it would be great to have some simple undetcted wallhack in mw2
so if anyone can give me this i would be greatful

In Progress, will be done this weekend.

If you have the time to make a new aimbot/walls/esp that would be dope all the ones ive been using are like 2 years old and kinda poo poo and i haven't seen a good one in a hot min. also im vac so i dont matter if detectable or nah. thanks in advance my dude your doing gods work

Same, will be done this weekend.

Hey man, I think what you are doing here is great! I just have one possible cheat to ask for.

I recently got VAC banned, and I have been using a VAC-unban hack but it doesn't work that well. It's supposed to put me back into the pool of regular players but it's still taking forever (5's of minutes most of the time) to find a lobby. Are you able to make a new hack for this (if it is possible)?

Also, as a side note (if you're up for it), how would you recommend getting into modding MW2 and stuff. I just took a university course for C programming, and understand that we must find offsets for certain variables in the game and such to switch certain aspects on/off, but what is needed to delve deeper into the hacking-MW2-world?

Hey DevinFSP,

my VAC bypass is only slightly different and it boils down to the same thing as what the other guy did. But I can make a dll for you (and others) that can be injected alongside the VAC bypass and it should take care of that stat issue I was talking about earlier. Before adding this to my hack I couldn't find a single lobby, after that I could always find something between 10 and 15.

A C-Background is perfect for getting into making hacks. Often people ask me for help with a Java background and they often have these weird ideas about how the stack works, how strings are stored and how structs/classes look like in memory. When I started learning C++ I was always interested in how the language itself works, I couldn't just accept how these "magical things" like for example polymorphism work. I disassembled my own programs and read a lot about how the language works internally. This helped me a lot when I started reversing call of duty games. Another thing that makes reversing call of duty are the leaked pdb's of other call of duties that you can find online. All call of duties are very similar so you can sort of cross reference the pdb of an older call of duty with MW2. What I always recommend to people who have some C/C++ background and who want to get started on making hacks for cod is to find dvar addresses and reverse engineer the dvar structure. That's pretty straight forward and can be done in a hex editor. All you need is a good understanding of structs and an idea of what a dvar is. You can look at the quake 3 sdk to get an idea of what a dvar looks like (or in the case of quake cvar_t).

-- Xen0

PS: Didn't test the dll, but it should work and it is undetected. If anyone using it gets banned it's most likely because of the injector. Let me know if it helps you at all. Also all my dll's will be made in VS 2017, so make sure to have the corresponding C++redistributable.

[DevinFSP]

Hey DevinFSP,

my VAC bypass is only slightly different and it boils down to the same thing as what the other guy did. But I can make a dll for you (and others) that can be injected alongside the VAC bypass and it should take care of that stat issue I was talking about earlier. Before adding this to my hack I couldn't find a single lobby, after that I could always find something between 10 and 15.

A C-Background is perfect for getting into making hacks. Often people ask me for help with a Java background and they often have these weird ideas about how the stack works, how strings are stored and how structs/classes look like in memory. When I started learning C++ I was always interested in how the language itself works, I couldn't just accept how these "magical things" like for example polymorphism work. I disassembled my own programs and read a lot about how the language works internally. This helped me a lot when I started reversing call of duty games. Another thing that makes reversing call of duty are the leaked pdb's of other call of duties that you can find online. All call of duties are very similar so you can sort of cross reference the pdb of an older call of duty with MW2. What I always recommend to people who have some C/C++ background and who want to get started on making hacks for cod is to find dvar addresses and reverse engineer the dvar structure. That's pretty straight forward and can be done in a hex editor. All you need is a good understanding of structs and an idea of what a dvar is. You can look at the quake 3 sdk to get an idea of what a dvar looks like (or in the case of quake cvar_t).

-- Xen0

PS: Didn't test the dll, but it should work and it is undetected. If anyone using it gets banned it's most likely because of the injector. Let me know if it helps you at all. Also all my dll's will be made in VS 2017, so make sure to have the corresponding C++redistributable.

EDIT: By the way! The link you provided in your reply to me sent me to an invalid attachment error by mpgh... :/

Thank you so much for the quick reply man! I was also one of those kids with a Java background looking to hack games, but had no idea what structs/pointers/offsets truly meant. Now, I have a nice solid background in the mechanics behind everything and I look forward to starting. Thank you so much also for the DLL, I'll give it a try right now!