Fatdoob's Aim Assist with GUI

[jhemp12]

What is the activation key? Tried pressing 1 on num pad and f5 and got no feedback for either. Just guessing because I didn't see an activation key anywhere in the instructions.

edit actually nevermind I found it. Don't know how I missed that.

[EasierShip51]

Can someone help me with 1080p setting?

[whothatmofo1]

Thanks for the feedback. I’ll do some more tests on 720p.

edit: tested on 1360x768 and worked fine for me. Make sure you're saving all settings after changing resolutions and/or using auto adjust. If it works right, your scan area should be centered on the destiny window.



Yes



Try capping frames to 80-100. Also whats your resolution and do you use multiple monitors? If so, is destiny on primary monitor and does auto adjust tell you the correct resolution?



I havent tested on win 7, i’ll put the bot on my laptop and do some tests.
edit: ran in compatibility mode for win 7 off my laptop, worked fine in my tests (not actually inside destiny), but if more people confirm it doesnt work on win7 I'll take a look.

Updated version coming soon after I tweak some more things / get some more feedback.

Also if you encounter problems please tell me:
- resolution
- do you have multiple monitors
- does auto adjust tell you correct res
- operating system
- frame rate

Single monitor, 1080p. Yes it detects it. Windowed full screen, 240mhz gsync monitor, brightness 4, windows 10 x64 pro. Cap it to 80-100? I though more frames was better for this thing

[moosenoodles]

Yep thats what it should do. Enjoy!



Yeah it varies a lot, I find low recoil weapons with fast ADS are the way to go. Also keep in mind some scopes and muzzle fire effects will cause problems if they are red/orange.



This one runs a bit slower, so on less powerful machines it may be almost unusable. Try turning up your aim speed and reducing video settings in game. You can turn down render quality % without affecting the bot.

I dunno about that im at 70-100fps for destiny at any given time with cpu usage at 25% on i7.. just baffles me, keep hearing "bot is great!", and all that but I always get issues with them when the enemy start to move about. I left the sense at the default 9 btw that seemed high enough for anyone to be fair lol.

[MrBananaman89]

im new to the community and to using a bot like this so i may be doing something wrong but when i aim at somebody my cursor just shakes left and right . im not sure if it locks for a split second then just locking onto something else or what is causing it. ive tried dropping the tolerance down to 40 and messing around with the speed but that didnt help the issue. any help would be appreciated.

im running the game at 1440p and have two monitors ,however destiny is on my main monitor and auto adjust does tell me the correct resolution (i tested by changed res on monitor and auto adjusting again to make sure). its on my windows 10 machine and normally frame rate is around 90-100fps

I've had your problem before. This is what you need to do.

1) make sure Destiny is running your MAIN monitor.
2) make sure both of your monitors are the same resolution.
3) make sure the resolution in game matches your monitor's selected resolution.
4) have 105 FOV and 4 Brightness.
5) have your aimbot sens be anywhere between 6 - 8. Higher and it gets very shaky.
6) If your dpi is too high it will be crazy. I use 800 mouse dpi and 4 in game sens.

Hope this helps.

[VampireGamerX]

Thanks for the awesome work, how does Auto adjust work? More like how should i go about getting it to 1440p? Do i do this while in crucible or can i do this while im doing my bounties?

EDIT: figured it out

[tripedup]

This is absolutely great doobie, you are the man! You made this user friendly and now i have a better idea of what to adjust if need be. I think the gun anyone is using in game has a lot to do with how effective the user perceives this. Auto rifles and pulse rifles seem to be the most effective. What guns are people having the most success with? Also, if i switched fire to right click instead of left click that would not effect anything would it?

Thanks again, keep up the good work!

[wissper]

So I notice when I use autoadjust it sets the res at my monitors desktop res of 4k, but my in game res is at 1440p.. how will this affect the bot? Should I manually configure settings for 1440p instead of using autoadjust?

Thanks for the hard work on this.

[fatdoobie]

What that draw area scan for?
Also bot is amazing.

Shows you where the bot is looking for red bars. Adjust it with scan x / y settings.

Any ideas what to change to make it work with inverted mouse?

Try this before your dllcall(mouse_event) line...

moveX := -moveX ; (if X is inverted)
moveY := -moveY ; (if Y is inverted)

Not tested.

when I tried to change the y-axis offset manually, it didn't seem to have any effect. Any ideas here? I would prefer it aim somewhere between the top of the neck and middle of face if at all possible.

Try increase it more. Make it the same as aimX to aim at neck/chest usually. Make it bigger again to aim at chest / stomach.

I click auto adjust for my primary monitor but then it says "Error Invalid Gui name. specifically default .

Hmm, thats odd. You didnt modify the settings.ini files or anything? Try re-download, never heard of that one before.
edit: Actually, I think I made a small typo in the code which would cause this problem. Strange that only you encountered this error though.

Single monitor, 1080p. Yes it detects it. Windowed full screen, 240mhz gsync monitor, brightness 4, windows 10 x64 pro. Cap it to 80-100? I though more frames was better for this thing

I’ve heard extremely high framerates can cause problems. Everything else sounds good.

Also, if i switched fire to right click instead of left click that would not effect anything would it?

Shouldnt be a problem.

So I notice when I use autoadjust it sets the res at my monitors desktop res of 4k, but my in game res is at 1440p.. how will this affect the bot? Should I manually configure settings for 1440p instead of using autoadjust?.

Sounds right. Windowed fullscreen mode sets the destiny dimensions to your desktop res.

However I have not tested on 4K, so maybe try it on 1440p (desktop res) and see if you get better results.

- - - Updated - - -

note: please wait for mods to approve or the download will just be an error.

New features:
- triggerbot (beta)
- free Y mode
- custom "aim on" key eg caps lock
- PvE mode and "no extra check" mode for imgsearch settings

Virus scan: 1 | 2

[killerclan]

Shows you where the bot is looking for red bars. Adjust it with scan x / y settings.



Try this before your dllcall(mouse_event) line...

moveX := -moveX ; (if X is inverted)
moveY := -moveY ; (if Y is inverted)

Not tested.



Try increase it more. Make it the same as aimX to aim at neck/chest usually. Make it bigger again to aim at chest / stomach.



Hmm, thats odd. You didnt modify the settings.ini files or anything? Try re-download, never heard of that one before.
edit: Actually, I think I made a small typo in the code which would cause this problem. Strange that only you encountered this error though.



I�ve heard extremely high framerates can cause problems. Everything else sounds good.



Shouldnt be a problem.



Sounds right. Windowed fullscreen mode sets the destiny dimensions to your desktop res.

However I have not tested on 4K, so maybe try it on 1440p (desktop res) and see if you get better results.

- - - Updated - - -

@ The mod who approves this attachment, could you please update the original post in this thread to this attachment? thanks!

Also, could you please remove the following text:



Thanks a lot!

note: please wait for mods to approve or the download will just be an error.

New features:
- triggerbot (beta)
- free Y mode
- custom "aim on" key eg caps lock
- PvE mode and "no extra check" mode for imgsearch settings

Virus scan: 1 | 2

not letting me download the link says its invalid

[lilrothanajr1]

not letting me download the link says its invalid

Gotta wait for it to get approved. he said it will show an error.

[ricardmark1]

Shows you where the bot is looking for red bars. Adjust it with scan x / y settings.



Try this before your dllcall(mouse_event) line...

moveX := -moveX ; (if X is inverted)
moveY := -moveY ; (if Y is inverted)

Not tested.



Try increase it more. Make it the same as aimX to aim at neck/chest usually. Make it bigger again to aim at chest / stomach.



Hmm, thats odd. You didnt modify the settings.ini files or anything? Try re-download, never heard of that one before.
edit: Actually, I think I made a small typo in the code which would cause this problem. Strange that only you encountered this error though.



I’ve heard extremely high framerates can cause problems. Everything else sounds good.



Shouldnt be a problem.



Sounds right. Windowed fullscreen mode sets the destiny dimensions to your desktop res.

However I have not tested on 4K, so maybe try it on 1440p (desktop res) and see if you get better results.

- - - Updated - - -

@ The mod who approves this attachment, could you please update the original post in this thread to this attachment? thanks!

Also, could you please remove the following text:



Thanks a lot!

note: please wait for mods to approve or the download will just be an error.

New features:
- triggerbot (beta)
- free Y mode
- custom "aim on" key eg caps lock
- PvE mode and "no extra check" mode for imgsearch settings

Virus scan: 1 | 2

What will be the next steps for lower hp bar and to improve stickness?
Also noticed that in one of the nessus map is pretty much impossible to play as it still locks in the environment.

[fatdoobie]

What will be the next steps for lower hp bar and to improve stickness?
Also noticed that in one of the nessus map is pretty much impossible to play as it still locks in the environment.

The 1.1 bot will be essentially at it’s limit in its current state, apart from fine tuning your settings. If we go any lower with the small bar size, you just pick up way too many false positives. Feel free to make the third red bar a bit smaller if you want.

I’m looking into andrew’s new method at the moment with transparency and a single image instead of double checks. It works pretty decent for pve but pvp will probably be more tricky. Pop into that thread if you want to see more discussion on it.

[VampireGamerX]

Triggerbot is where the bot would shoot for you if you have the assigned key pressed? Is it better than manually pressing the trigger?

[batismul]

@fatdoobie

Inverted works now with your recommendation, many thanks and appreciate you taking the time to help us out