Page 1 of 4 123 ... LastLast
Results 1 to 15 of 60
  1. #1
    ColdThunder's Avatar
    Join Date
    Feb 2007
    Gender
    male
    Posts
    101
    Reputation
    12
    Thanks
    12

    Post ColdThunder's WarRock Tutorials

    Here are some tutorials for some hacks for u...

    Static adresses are always green
    DMAs are always black
    Easyiest way to find pointer? Just right click on the adress, "Search for pointer" or sumthin like that, "injected" and then "OK". In the results u'll see the pointers, after a click on "+" the offsets. Click on "Add adress manually" and check "Pointer" to add them.

    If u don't know anything about gamehacking, look at this tutorial made by me: Game Hacking Basic Guide - Example: Minesweeper

    Swim in air
    There's already another tutorial from bugmenot, but anyhow I'll make one myself here...

    1. Go in a game and prone
    2. First Scan -> 2 bytes -> value: 2
    3. Crouch and Next Scan -> value: 1
    4. Stand up -> Next Scan -> value: 0
    5. U should have one adress left now. If not, do these searches a few times.
    6. If u want to swim in air now, change value to 4 - then u'll swim

    Remember that this is a DMA so u'll need a pointer for this.

    All values:
    0 -> stand
    1 -> crouch
    2 -> prone
    3 -> in a vehicle
    4 -> swim
    5 -> on a ladder or sumthin... will beam u to a point if u use this "for fun"

    Swim in air only works on maps where is no water.

    RC Control
    U need the same pointer as in Swim in air for this.

    1. Go in a vehicle
    2. Change the value of that pointer to 0
    3. Now u are out of that vehicle and u are able to control it

    Unlim. Stamina
    Very easy one.

    1. First scan -> 4 bytes -> Unknown initial value
    2. Roll/run/jump until ur Stamina is empty
    3. Next Scan -> Decreased value
    4. When Stamina fills up again, search for increased value
    5. Do step 3 and 4 a few times
    6. U'll have one static adress in the end. Just freeze it.

    Super aim (Less Spread + Less Recoil + little Aim)
    Why I don't call it NO spread etc? Because no engine does freeze it fast enough.

    1. Choose any weapon
    2. First Scan (2 bytes) -> Unknown initial value
    3. Choose another weapon. Look if the aim was growing or shrinking. When it was growing, search for increased value, when it was shrinking, search for decreased value
    4. Do this a few times
    5. U'll have some adresses (between 10 and 30 I think). U'll have to look which ones of these they are. Spread and Recoil have different adresses and values, but both are static ones.
    6. Just freeze them to 0

    Crosshairs and Scope
    Need Scope and Crosshairs for every weapon? The way to find them are nearly the same.

    U need 2 bytes for both. They are static ones.

    Beginning for scope:
    Take a sniper rifle, zoom in and search for 1. Zoom out and search for 0.
    Beginning for crosshairs:
    Take a weapon with crosshairs, like the M4. Search for 1. Take ur Fists and search for 0

    Do both things again and again if u have each time only a few or one adress/es.

    Weapons
    This is easyier than u think.

    1. Take the assault with standart weapons.
    2. Take ur fists and search for 1 with 2 bytes.
    3. Take ur Colt and search for 2. Take ur K2 and search for 9.
    (U can even do this with every weapon value u want.)
    4. Do that a few times. U'll have to adresses
    5. First is normally the weapon adress, second the adress for the way u hold and shoot the weapon (WARNING: This is rapid fire when u use it with unlim. ammo). Both are dynamic, so u'll need the pointer.

    Here a list of weapon values (Thanks to bugmenot for this):
    Code:
    1. Fist
    2. Colt
    3. Eagle
    4. MP5K
    5. Magnum
    6. Glock
    7. Dual Berettas
    8. AK 47
    9. K2
    10. M4A1
    11. Famas
    12. L85A1 Sniper Rifle
    13. XM8
    14. Type 89
    15. g36C
    16. g36c Drummed
    17. g36
    18. g36 drummed
    19. MP5
    20. P90
    21. Uzi
    22. Mac 10
    23. K1
    24. MP7A1
    25. PSG-1
    26. Barrett M82
    27. AUG
    28. SSG
    29. M24
    30. Dragunov SVD
    31. AI AW
    32. M60
    33. M249
    34. Winchester
    35. Panzer
    36. M136AT
    37. RPG
    38. Javelin
    39. Stinger
    40. SG
    41. TMA-1A Mine
    42. HA_Supply (Mine)
    43. K400_Grenade
    44. K400
    45. Smoke Grenade
    46. Flash Bang 1
    47. Flash Bang 2
    48. Claymore Mine
    49. Claymore Switch
    50. Empty
    51. C4
    52. Med Kit
    53. Med Kit 2
    54. Med Kit 3
    55. Spanner
    56. Pipe Wrench
    57. Adrenaline
    58. Parachute
    59. Detector
    60. Telescope
    61. Flash Mine
    62. MG3 Machine Gun
    63. M134 Minigun
    64. MK1S Grenade Launcher
    65. Ammo Box
    66. M14 Mine
    67. Tear Gas
    68. Medic Box
    69. K203
    70. Telescope
    71. Silencer
    72. Nipper
    Note: Only Winchester and some nades do damage. Why? Damage is server sided.

    Direct Spawn
    Will let u spawn after clicked on OK directly

    1. Go in spawn menu
    2. 4 bytes
    3. Now search for the seconds left to next spawning round
    4. Do that a few times
    5. There'll be two static adresses - U'll need both of them. Just freeze them to 0.

    ALL CREDITS TO ME, EXCEPTED FOR THE WEAPON LIST. WEAPON LIST WAS MADE BY BUGMENOT. DO NOT LEECH THIS TUTORIALS. DO NOT COPY AND TAKE CREDITS FOR URSELF.

    Now have fun with these
    Last edited by ColdThunder; 04-24-2007 at 07:32 AM.

  2. #2
    EndRiT's Avatar
    Join Date
    Dec 2005
    Gender
    male
    Location
    USSR
    Posts
    12,751
    Reputation
    170
    Thanks
    4,294,967,295
    Nice, GJ

  3. #3
    EndRiT's Avatar
    Join Date
    Dec 2005
    Gender
    male
    Location
    USSR
    Posts
    12,751
    Reputation
    170
    Thanks
    4,294,967,295

    Heres Super Jump TUT

    Super Jump

    1)Scan 4btyes Unkown
    2)Climb a ladder to get to a higher place.
    3)Search Next for Increased Value
    4)Go down the ladder
    5)Search Next for decreased value
    5)Repeat till you get one address left
    6)Freeze it to a high number (how ever you want, experiment xD)

    There you go, Jump hack.

    If you are skilled enough you can get the Static address by pointer scan.

    -Bugmenot

  4. #4
    yannickjolie's Avatar
    Join Date
    Apr 2007
    Gender
    male
    Posts
    18
    Reputation
    10
    Thanks
    0
    What program should i use for this,
    And how to attach this to a trainer?
    If you can help me
    MSN: yannickjolie[at]hotmail.com It will make my trainer complete

  5. #5
    crimetime's Avatar
    Join Date
    Mar 2007
    Posts
    73
    Reputation
    12
    Thanks
    0
    nice noobfriendliy tuts. should be sticked

  6. #6
    ColdThunder's Avatar
    Join Date
    Feb 2007
    Gender
    male
    Posts
    101
    Reputation
    12
    Thanks
    12
    Quote Originally Posted by yannickjolie View Post
    What program should i use for this,
    And how to attach this to a trainer?
    If you can help me
    MSN: yannickjolie[at]hotmail.com It will make my trainer complete
    A UCE of course. And u would know that if u really would be able to make a trainer.

    @crimetime: thx

  7. #7
    King Ownage's Avatar
    Join Date
    Mar 2007
    Posts
    377
    Reputation
    10
    Thanks
    7
    NIce tuts

  8. #8
    b00n's Avatar
    Join Date
    Mar 2007
    Gender
    male
    Posts
    217
    Reputation
    11
    Thanks
    13
    thx nice one's

  9. #9
    EndRiT's Avatar
    Join Date
    Dec 2005
    Gender
    male
    Location
    USSR
    Posts
    12,751
    Reputation
    170
    Thanks
    4,294,967,295
    Yes, I just realized how good they are myself, good job man.

  10. #10
    araz's Avatar
    Join Date
    Apr 2007
    Posts
    90
    Reputation
    10
    Thanks
    2
    i have no idea what any of that means. if you could find time to make an even more detailed one it would be much appreciated


    thank you

  11. #11
    EndRiT's Avatar
    Join Date
    Dec 2005
    Gender
    male
    Location
    USSR
    Posts
    12,751
    Reputation
    170
    Thanks
    4,294,967,295
    We first you need a UCE

    Second you need to traget WarRock.exe while in the game.
    Just do the Cheat Engine tutorial and ur set 4 lyf.

  12. #12
    araz's Avatar
    Join Date
    Apr 2007
    Posts
    90
    Reputation
    10
    Thanks
    2
    ok thanks and what does UCE mean?? and what does client sided and server sided and all that crap mean

    thank you

  13. #13
    King Ownage's Avatar
    Join Date
    Mar 2007
    Posts
    377
    Reputation
    10
    Thanks
    7
    A UCE is an undetected cheat engine, and someone else is posting the rest right now probably, and i cant be arsed.

  14. #14
    araz's Avatar
    Join Date
    Apr 2007
    Posts
    90
    Reputation
    10
    Thanks
    2
    right ok thanks . is erm... oengine a undetected cheat engine?

  15. #15
    EndRiT's Avatar
    Join Date
    Dec 2005
    Gender
    male
    Location
    USSR
    Posts
    12,751
    Reputation
    170
    Thanks
    4,294,967,295
    UCE = Undetected Cheat Engine (Do you know what Cheat Engine is?)
    Server sided = Hackable (but hard) and highly illegal (could get prosocuted)
    Non Server Side= Hackable (relivently easy) illegal i guess but no prosocution

    Stick to non server sided hacks and you'll do fine here.

    Welcome to MPGH!

    P.S Oengine is a UCE, yes.

Page 1 of 4 123 ... LastLast

Similar Threads

  1. Warrock Hack - Tutorial
    By Dave84311 in forum WarRock - International Hacks
    Replies: 667
    Last Post: 10-09-2007, 10:10 AM
  2. Korean WarRock Account Tutorial
    By arunforce in forum WarRock Korea Hacks
    Replies: 5
    Last Post: 05-05-2007, 04:23 AM
  3. [TUTORIAL] Skinning WarRock
    By quin123 in forum WarRock - International Hacks
    Replies: 14
    Last Post: 12-25-2006, 09:03 PM
  4. [TUTORIAL] Korean WarRock Bypass
    By quin123 in forum WarRock - International Hacks
    Replies: 7
    Last Post: 11-11-2006, 12:25 PM
  5. Installing Korean WarRock (Tutorial)
    By RebornAce in forum WarRock - International Hacks
    Replies: 33
    Last Post: 04-05-2006, 10:01 AM