Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. 09-07-2016 #1
    RuShi
    RuShi is offline
    Former Staff
    Contributor
    RuShi's Avatar
    Join Date
    Jan 2016
    Gender
    male
    Location
    File Not Found 404!
    Posts
    2,531
    Reputation
    210
    Thanks
    13,009
    My Mood
    Innocent
    Send a message via Birdie™ to RuShi United States H2O C95P TmatzXzoneEv

    Read Writing Memory Visual Basic

    Code:
    Module ReadWritingMemory
    Private Declare Function OpenProcess Lib "kernel32" (ByVal dwDesiredAccess As Integer, ByVal bInheritHandle As Integer, ByVal dwProcessId As Integer) As Integer

    Private Declare Function WriteProcessMemory1 Lib "kernel32" Alias "WriteProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Integer, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Integer
    Private Declare Function WriteProcessMemory2 Lib "kernel32" Alias "WriteProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Single, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Single
    Private Declare Function WriteProcessMemory3 Lib "kernel32" Alias "WriteProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Long, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Long

    Private Declare Function ReadProcessMemory1 Lib "kernel32" Alias "ReadProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Integer, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Integer
    Private Declare Function ReadProcessMemory2 Lib "kernel32" Alias "ReadProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Single, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Single
    Private Declare Function ReadProcessMemory3 Lib "kernel32" Alias "ReadProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Long, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Long

    Const PROCESS_ALL_ACCESS = &H1F0FF

    Public Function WriteDMAInteger(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Value As Integer, ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Boolean
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadInteger(Process, lvl, nsize) + Offsets(i - 1)
            Next
            WriteInteger(Process, lvl, Value, nsize)
            Return True
        Catch ex As Exception
            Return False
        End Try
    End Function

    Public Function ReadDMAInteger(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Integer
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadInteger(Process, lvl, nsize) + Offsets(i - 1)
            Next
            Dim vBuffer As Integer
            vBuffer = ReadInteger(Process, lvl, nsize)
            Return vBuffer
        Catch ex As Exception

        End Try
    End Function

    Public Function WriteDMAFloat(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Value As Single, ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Boolean
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadFloat(Process, lvl, nsize) + Offsets(i - 1)
            Next
            WriteFloat(Process, lvl, Value, nsize)
            Return True
        Catch ex As Exception
            Return False
        End Try
    End Function

    Public Function ReadDMAFloat(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Single
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadFloat(Process, lvl, nsize) + Offsets(i - 1)
            Next
            Dim vBuffer As Single
            vBuffer = ReadFloat(Process, lvl, nsize)
            Return vBuffer
        Catch ex As Exception

        End Try
    End Function

    Public Function WriteDMALong(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Value As Long, ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Boolean
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadLong(Process, lvl, nsize) + Offsets(i - 1)
            Next
            WriteLong(Process, lvl, Value, nsize)
            Return True
        Catch ex As Exception
            Return False
        End Try
    End Function

    Public Function ReadDMALong(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Long
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadLong(Process, lvl, nsize) + Offsets(i - 1)
            Next
            Dim vBuffer As Long
            vBuffer = ReadLong(Process, lvl, nsize)
            Return vBuffer
        Catch ex As Exception

        End Try
    End Function

    Public Sub WriteNOPs(ByVal ProcessName As String, ByVal Address As Long, ByVal NOPNum As Integer)
        Dim C As Integer
        Dim B As Integer
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        B = 0
        For C = 1 To NOPNum
            Call WriteProcessMemory1(hProcess, Address + B, &H90, 1, 0&)
            B = B + 1
        Next C
    End Sub

    Public Sub WriteXBytes(ByVal ProcessName As String, ByVal Address As Long, ByVal Value As String)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim C As Integer
        Dim B As Integer
        Dim D As Integer
        Dim V As Byte

        B = 0
        D = 1
        For C = 1 To Math****und((Len(Value) / 2))
            V = Val("&H" & Mid$(Value, D, 2))
            Call WriteProcessMemory1(hProcess, Address + B, V, 1, 0&)
            B = B + 1
            D = D + 2
        Next C

    End Sub

    Public Sub WriteInteger(ByVal ProcessName As String, ByVal Address As Integer, ByVal Value As Integer, Optional ByVal nsize As Integer = 4)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim hAddress, vBuffer As Integer
        hAddress = Address
        vBuffer = Value
        WriteProcessMemory1(hProcess, hAddress, CInt(vBuffer), nsize, 0)
    End Sub

    Public Sub WriteFloat(ByVal ProcessName As String, ByVal Address As Integer, ByVal Value As Single, Optional ByVal nsize As Integer = 4)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim hAddress As Integer
        Dim vBuffer As Single

        hAddress = Address
        vBuffer = Value
        WriteProcessMemory2(hProcess, hAddress, vBuffer, nsize, 0)
    End Sub

    Public Sub WriteLong(ByVal ProcessName As String, ByVal Address As Integer, ByVal Value As Long, Optional ByVal nsize As Integer = 4)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim hAddress As Integer
        Dim vBuffer As Long

        hAddress = Address
        vBuffer = Value
        WriteProcessMemory3(hProcess, hAddress, vBuffer, nsize, 0)
    End Sub

    Public Function ReadInteger(ByVal ProcessName As String, ByVal Address As Integer, Optional ByVal nsize As Integer = 4) As Integer
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Function
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Function
        End If

        Dim hAddress, vBuffer As Integer
        hAddress = Address
        ReadProcessMemory1(hProcess, hAddress, vBuffer, nsize, 0)
        Return vBuffer
    End Function

    Public Function ReadFloat(ByVal ProcessName As String, ByVal Address As Integer, Optional ByVal nsize As Integer = 4) As Single
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Function
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Function
        End If

        Dim hAddress As Integer
        Dim vBuffer As Single

        hAddress = Address
        ReadProcessMemory2(hProcess, hAddress, vBuffer, nsize, 0)
        Return vBuffer
    End Function

    Public Function ReadLong(ByVal ProcessName As String, ByVal Address As Integer, Optional ByVal nsize As Integer = 4) As Long
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Function
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Function
        End If

        Dim hAddress As Integer
        Dim vBuffer As Long

        hAddress = Address
        ReadProcessMemory3(hProcess, hAddress, vBuffer, nsize, 0)
        Return vBuffer
    End Function

End Module
    Anything to ask ? Reply above .


    MPGH History:
    Member: 02/1/2016
    Contributor: 29/6/2016
    Minion: 25/8/2016
    Former Staff: 07/02/2017
    Minion: 21/9/2017
    Reply With Quote Reply With Quote

  2. The Following 5 Users Say Thank You to RuShi For This Useful Post:

    AlexMAESTRUL (02-12-2018),bigode2410 (10-12-2016),nikazizi97 (11-28-2016),PineapplePizza (08-09-2017),[GM]Luffy (09-13-2016)
  3. 09-07-2016 #2
    ReseviC
    ReseviC is offline
    Banned
    BANNED!
    ReseviC's Avatar
    Join Date
    May 2016
    Gender
    male
    Location
    BEClient.dll
    Posts
    354
    Reputation
    10
    Thanks
    3,430
    My Mood
    Busy
    Send a message via Birdie™ to ReseviC Singapore Sanchino
    Quote Originally Posted by RedHunter View Post
    Code:
    Module ReadWritingMemory
    Private Declare Function OpenProcess Lib "kernel32" (ByVal dwDesiredAccess As Integer, ByVal bInheritHandle As Integer, ByVal dwProcessId As Integer) As Integer

    Private Declare Function WriteProcessMemory1 Lib "kernel32" Alias "WriteProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Integer, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Integer
    Private Declare Function WriteProcessMemory2 Lib "kernel32" Alias "WriteProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Single, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Single
    Private Declare Function WriteProcessMemory3 Lib "kernel32" Alias "WriteProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Long, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Long

    Private Declare Function ReadProcessMemory1 Lib "kernel32" Alias "ReadProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Integer, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Integer
    Private Declare Function ReadProcessMemory2 Lib "kernel32" Alias "ReadProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Single, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Single
    Private Declare Function ReadProcessMemory3 Lib "kernel32" Alias "ReadProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Long, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Long

    Const PROCESS_ALL_ACCESS = &H1F0FF

    Public Function WriteDMAInteger(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Value As Integer, ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Boolean
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadInteger(Process, lvl, nsize) + Offsets(i - 1)
            Next
            WriteInteger(Process, lvl, Value, nsize)
            Return True
        Catch ex As Exception
            Return False
        End Try
    End Function

    Public Function ReadDMAInteger(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Integer
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadInteger(Process, lvl, nsize) + Offsets(i - 1)
            Next
            Dim vBuffer As Integer
            vBuffer = ReadInteger(Process, lvl, nsize)
            Return vBuffer
        Catch ex As Exception

        End Try
    End Function

    Public Function WriteDMAFloat(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Value As Single, ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Boolean
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadFloat(Process, lvl, nsize) + Offsets(i - 1)
            Next
            WriteFloat(Process, lvl, Value, nsize)
            Return True
        Catch ex As Exception
            Return False
        End Try
    End Function

    Public Function ReadDMAFloat(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Single
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadFloat(Process, lvl, nsize) + Offsets(i - 1)
            Next
            Dim vBuffer As Single
            vBuffer = ReadFloat(Process, lvl, nsize)
            Return vBuffer
        Catch ex As Exception

        End Try
    End Function

    Public Function WriteDMALong(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Value As Long, ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Boolean
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadLong(Process, lvl, nsize) + Offsets(i - 1)
            Next
            WriteLong(Process, lvl, Value, nsize)
            Return True
        Catch ex As Exception
            Return False
        End Try
    End Function

    Public Function ReadDMALong(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Long
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadLong(Process, lvl, nsize) + Offsets(i - 1)
            Next
            Dim vBuffer As Long
            vBuffer = ReadLong(Process, lvl, nsize)
            Return vBuffer
        Catch ex As Exception

        End Try
    End Function

    Public Sub WriteNOPs(ByVal ProcessName As String, ByVal Address As Long, ByVal NOPNum As Integer)
        Dim C As Integer
        Dim B As Integer
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        B = 0
        For C = 1 To NOPNum
            Call WriteProcessMemory1(hProcess, Address + B, &H90, 1, 0&)
            B = B + 1
        Next C
    End Sub

    Public Sub WriteXBytes(ByVal ProcessName As String, ByVal Address As Long, ByVal Value As String)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim C As Integer
        Dim B As Integer
        Dim D As Integer
        Dim V As Byte

        B = 0
        D = 1
        For C = 1 To Math****und((Len(Value) / 2))
            V = Val("&H" & Mid$(Value, D, 2))
            Call WriteProcessMemory1(hProcess, Address + B, V, 1, 0&)
            B = B + 1
            D = D + 2
        Next C

    End Sub

    Public Sub WriteInteger(ByVal ProcessName As String, ByVal Address As Integer, ByVal Value As Integer, Optional ByVal nsize As Integer = 4)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim hAddress, vBuffer As Integer
        hAddress = Address
        vBuffer = Value
        WriteProcessMemory1(hProcess, hAddress, CInt(vBuffer), nsize, 0)
    End Sub

    Public Sub WriteFloat(ByVal ProcessName As String, ByVal Address As Integer, ByVal Value As Single, Optional ByVal nsize As Integer = 4)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim hAddress As Integer
        Dim vBuffer As Single

        hAddress = Address
        vBuffer = Value
        WriteProcessMemory2(hProcess, hAddress, vBuffer, nsize, 0)
    End Sub

    Public Sub WriteLong(ByVal ProcessName As String, ByVal Address As Integer, ByVal Value As Long, Optional ByVal nsize As Integer = 4)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim hAddress As Integer
        Dim vBuffer As Long

        hAddress = Address
        vBuffer = Value
        WriteProcessMemory3(hProcess, hAddress, vBuffer, nsize, 0)
    End Sub

    Public Function ReadInteger(ByVal ProcessName As String, ByVal Address As Integer, Optional ByVal nsize As Integer = 4) As Integer
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Function
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Function
        End If

        Dim hAddress, vBuffer As Integer
        hAddress = Address
        ReadProcessMemory1(hProcess, hAddress, vBuffer, nsize, 0)
        Return vBuffer
    End Function

    Public Function ReadFloat(ByVal ProcessName As String, ByVal Address As Integer, Optional ByVal nsize As Integer = 4) As Single
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Function
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Function
        End If

        Dim hAddress As Integer
        Dim vBuffer As Single

        hAddress = Address
        ReadProcessMemory2(hProcess, hAddress, vBuffer, nsize, 0)
        Return vBuffer
    End Function

    Public Function ReadLong(ByVal ProcessName As String, ByVal Address As Integer, Optional ByVal nsize As Integer = 4) As Long
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Function
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Function
        End If

        Dim hAddress As Integer
        Dim vBuffer As Long

        hAddress = Address
        ReadProcessMemory3(hProcess, hAddress, vBuffer, nsize, 0)
        Return vBuffer
    End Function

End Module
    Anything to ask ? Reply above .
    Ah This , Very easy to make Trainer,etc
    Nice
    Reply With Quote Reply With Quote
  4. 09-08-2016 #3
    ZhinLoung
    ZhinLoung is offline
    Banned
    BANNED!
    ZhinLoung's Avatar
    Join Date
    Jun 2016
    Gender
    male
    Posts
    181
    Reputation
    10
    Thanks
    15
    Send a message via Birdie™ to ZhinLoung Malaysia
    VB? _~_
    /msg2short
    Reply With Quote Reply With Quote
  5. 09-08-2016 #4
    RuShi
    RuShi is offline
    Threadstarter
    Former Staff
    Contributor
    RuShi's Avatar
    Join Date
    Jan 2016
    Gender
    male
    Location
    File Not Found 404!
    Posts
    2,531
    Reputation
    210
    Thanks
    13,009
    My Mood
    Innocent
    Send a message via Birdie™ to RuShi United States H2O C95P TmatzXzoneEv
    Quote Originally Posted by ZhinLoung View Post
    VB? _~_
    /msg2short
    Yeah , Its VB .


    MPGH History:
    Member: 02/1/2016
    Contributor: 29/6/2016
    Minion: 25/8/2016
    Former Staff: 07/02/2017
    Minion: 21/9/2017
    Reply With Quote Reply With Quote
  6. 09-08-2016 #5
    COD3RIN
    COD3RIN is offline
    MPGH Lord
    MPGH Member
    COD3RIN's Avatar
    Join Date
    May 2013
    Gender
    male
    Location
    卍
    Posts
    5,309
    Reputation
    468
    Thanks
    28,779
    My Mood
    Angelic
    Send a message via Birdie™ to COD3RIN Sweden Hacker skin
    here the complete tutorial https://www.mpgh.net/forum/showthread.php?t=760779
    ᚛C☢dℝin3᚜
    Love you.    ~Kenshit13
    Quote Originally Posted by cheaterman26 View Post
    COD3RIN PUT A BACKDOOR ON HIS OWN CHEAT HE HACK MY COMPUTER AND MY STEAM, DON'T TRUST THIS GUYS !


    Reply With Quote Reply With Quote

  7. The Following User Says Thank You to COD3RIN For This Useful Post:

    RuShi (09-08-2016)
  8. 10-02-2016 #6
    skycool07
    skycool07 is offline
    New Member
    MPGH Member
    skycool07's Avatar
    Join Date
    Aug 2015
    Gender
    male
    Posts
    14
    Reputation
    10
    Thanks
    0
    Send a message via Birdie™ to skycool07 Philippines
    in master131 memory

    how do i change process while the application is already running?
    or i need to change in the code everytime i need to use it?
    Reply With Quote Reply With Quote
  9. 10-03-2016 #7
    RuShi
    RuShi is offline
    Threadstarter
    Former Staff
    Contributor
    RuShi's Avatar
    Join Date
    Jan 2016
    Gender
    male
    Location
    File Not Found 404!
    Posts
    2,531
    Reputation
    210
    Thanks
    13,009
    My Mood
    Innocent
    Send a message via Birdie™ to RuShi United States H2O C95P TmatzXzoneEv
    Quote Originally Posted by skycool07 View Post
    in master131 memory

    how do i change process while the application is already running?
    or i need to change in the code everytime i need to use it?
    Use textbox or change It directly .


    MPGH History:
    Member: 02/1/2016
    Contributor: 29/6/2016
    Minion: 25/8/2016
    Former Staff: 07/02/2017
    Minion: 21/9/2017
    Reply With Quote Reply With Quote
  10. 10-05-2016 #8
    skycool07
    skycool07 is offline
    New Member
    MPGH Member
    skycool07's Avatar
    Join Date
    Aug 2015
    Gender
    male
    Posts
    14
    Reputation
    10
    Thanks
    0
    Send a message via Birdie™ to skycool07 Philippines
    Quote Originally Posted by Luffy View Post
    Use textbox or change It directly .
    any sample how to change using textbox?
    Reply With Quote Reply With Quote
  11. 10-05-2016 #9
    RuShi
    RuShi is offline
    Threadstarter
    Former Staff
    Contributor
    RuShi's Avatar
    Join Date
    Jan 2016
    Gender
    male
    Location
    File Not Found 404!
    Posts
    2,531
    Reputation
    210
    Thanks
    13,009
    My Mood
    Innocent
    Send a message via Birdie™ to RuShi United States H2O C95P TmatzXzoneEv
    Quote Originally Posted by skycool07 View Post
    any sample how to change using textbox?
    Never try It . Just try It out by urself .


    MPGH History:
    Member: 02/1/2016
    Contributor: 29/6/2016
    Minion: 25/8/2016
    Former Staff: 07/02/2017
    Minion: 21/9/2017
    Reply With Quote Reply With Quote
  12. 10-09-2016 #10
    skycool07
    skycool07 is offline
    New Member
    MPGH Member
    skycool07's Avatar
    Join Date
    Aug 2015
    Gender
    male
    Posts
    14
    Reputation
    10
    Thanks
    0
    Send a message via Birdie™ to skycool07 Philippines
    Not Working
     
    Public Function WriteDMAFloat(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Value As Single, ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Boolean
    Try
    Dim lvl As Integer = Address
    For i As Integer = 1 To Level
    lvl = ReadFloat(Process, lvl, nsize) + Offsets(i - 1)
    Next
    WriteFloat(Process, lvl, Value, nsize)
    Return True
    Catch ex As Exception
    Return False
    End Try
    End Function


     
    Public Function WriteDMAFloat(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Value As Single, ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Boolean
    Try
    Dim lvl As Integer = Address
    For i As Integer = 1 To Level
    lvl = ReadFloat(Process, lvl, nsize) + Offsets(i - 1)
    Next
    WriteInteger(Process, lvl, Value, nsize)
    Return True
    Catch ex As Exception
    Return False
    End Try
    End Function
    Reply With Quote Reply With Quote
  13. 11-28-2016 #11
    nikazizi97
    nikazizi97 is offline
    Expert Member
    MPGH Member
    nikazizi97's Avatar
    Join Date
    Oct 2014
    Gender
    male
    Posts
    677
    Reputation
    10
    Thanks
    590
    My Mood
    Angelic
    Send a message via Birdie™ to nikazizi97 Malaysia
     
    Quote Originally Posted by Luffy View Post
    Code:
    Module ReadWritingMemory
    Private Declare Function OpenProcess Lib "kernel32" (ByVal dwDesiredAccess As Integer, ByVal bInheritHandle As Integer, ByVal dwProcessId As Integer) As Integer

    Private Declare Function WriteProcessMemory1 Lib "kernel32" Alias "WriteProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Integer, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Integer
    Private Declare Function WriteProcessMemory2 Lib "kernel32" Alias "WriteProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Single, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Single
    Private Declare Function WriteProcessMemory3 Lib "kernel32" Alias "WriteProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Long, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Long

    Private Declare Function ReadProcessMemory1 Lib "kernel32" Alias "ReadProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Integer, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Integer
    Private Declare Function ReadProcessMemory2 Lib "kernel32" Alias "ReadProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Single, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Single
    Private Declare Function ReadProcessMemory3 Lib "kernel32" Alias "ReadProcessMemory" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Long, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Long

    Const PROCESS_ALL_ACCESS = &H1F0FF

    Public Function WriteDMAInteger(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Value As Integer, ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Boolean
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadInteger(Process, lvl, nsize) + Offsets(i - 1)
            Next
            WriteInteger(Process, lvl, Value, nsize)
            Return True
        Catch ex As Exception
            Return False
        End Try
    End Function

    Public Function ReadDMAInteger(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Integer
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadInteger(Process, lvl, nsize) + Offsets(i - 1)
            Next
            Dim vBuffer As Integer
            vBuffer = ReadInteger(Process, lvl, nsize)
            Return vBuffer
        Catch ex As Exception

        End Try
    End Function

    Public Function WriteDMAFloat(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Value As Single, ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Boolean
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadFloat(Process, lvl, nsize) + Offsets(i - 1)
            Next
            WriteFloat(Process, lvl, Value, nsize)
            Return True
        Catch ex As Exception
            Return False
        End Try
    End Function

    Public Function ReadDMAFloat(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Single
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadFloat(Process, lvl, nsize) + Offsets(i - 1)
            Next
            Dim vBuffer As Single
            vBuffer = ReadFloat(Process, lvl, nsize)
            Return vBuffer
        Catch ex As Exception

        End Try
    End Function

    Public Function WriteDMALong(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Value As Long, ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Boolean
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadLong(Process, lvl, nsize) + Offsets(i - 1)
            Next
            WriteLong(Process, lvl, Value, nsize)
            Return True
        Catch ex As Exception
            Return False
        End Try
    End Function

    Public Function ReadDMALong(ByVal Process As String, ByVal Address As Integer, ByVal Offsets As Integer(), ByVal Level As Integer, Optional ByVal nsize As Integer = 4) As Long
        Try
            Dim lvl As Integer = Address
            For i As Integer = 1 To Level
                lvl = ReadLong(Process, lvl, nsize) + Offsets(i - 1)
            Next
            Dim vBuffer As Long
            vBuffer = ReadLong(Process, lvl, nsize)
            Return vBuffer
        Catch ex As Exception

        End Try
    End Function

    Public Sub WriteNOPs(ByVal ProcessName As String, ByVal Address As Long, ByVal NOPNum As Integer)
        Dim C As Integer
        Dim B As Integer
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        B = 0
        For C = 1 To NOPNum
            Call WriteProcessMemory1(hProcess, Address + B, &H90, 1, 0&)
            B = B + 1
        Next C
    End Sub

    Public Sub WriteXBytes(ByVal ProcessName As String, ByVal Address As Long, ByVal Value As String)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim C As Integer
        Dim B As Integer
        Dim D As Integer
        Dim V As Byte

        B = 0
        D = 1
        For C = 1 To Math****und((Len(Value) / 2))
            V = Val("&H" & Mid$(Value, D, 2))
            Call WriteProcessMemory1(hProcess, Address + B, V, 1, 0&)
            B = B + 1
            D = D + 2
        Next C

    End Sub

    Public Sub WriteInteger(ByVal ProcessName As String, ByVal Address As Integer, ByVal Value As Integer, Optional ByVal nsize As Integer = 4)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim hAddress, vBuffer As Integer
        hAddress = Address
        vBuffer = Value
        WriteProcessMemory1(hProcess, hAddress, CInt(vBuffer), nsize, 0)
    End Sub

    Public Sub WriteFloat(ByVal ProcessName As String, ByVal Address As Integer, ByVal Value As Single, Optional ByVal nsize As Integer = 4)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim hAddress As Integer
        Dim vBuffer As Single

        hAddress = Address
        vBuffer = Value
        WriteProcessMemory2(hProcess, hAddress, vBuffer, nsize, 0)
    End Sub

    Public Sub WriteLong(ByVal ProcessName As String, ByVal Address As Integer, ByVal Value As Long, Optional ByVal nsize As Integer = 4)
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Sub
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Sub
        End If

        Dim hAddress As Integer
        Dim vBuffer As Long

        hAddress = Address
        vBuffer = Value
        WriteProcessMemory3(hProcess, hAddress, vBuffer, nsize, 0)
    End Sub

    Public Function ReadInteger(ByVal ProcessName As String, ByVal Address As Integer, Optional ByVal nsize As Integer = 4) As Integer
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Function
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Function
        End If

        Dim hAddress, vBuffer As Integer
        hAddress = Address
        ReadProcessMemory1(hProcess, hAddress, vBuffer, nsize, 0)
        Return vBuffer
    End Function

    Public Function ReadFloat(ByVal ProcessName As String, ByVal Address As Integer, Optional ByVal nsize As Integer = 4) As Single
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Function
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Function
        End If

        Dim hAddress As Integer
        Dim vBuffer As Single

        hAddress = Address
        ReadProcessMemory2(hProcess, hAddress, vBuffer, nsize, 0)
        Return vBuffer
    End Function

    Public Function ReadLong(ByVal ProcessName As String, ByVal Address As Integer, Optional ByVal nsize As Integer = 4) As Long
        If ProcessName.EndsWith(".exe") Then
            ProcessName = ProcessName.Replace(".exe", "")
        End If
        Dim MyP As Process() = Process.GetProcessesByName(ProcessName)
        If MyP.Length = 0 Then
            MessageBox.Show(ProcessName & " isn't open!")
            Exit Function
        End If
        Dim hProcess As IntPtr = OpenProcess(PROCESS_ALL_ACCESS, 0, MyP(0).Id)
        If hProcess = IntPtr.Zero Then
            MessageBox.Show("Failed to open " & ProcessName & "!")
            Exit Function
        End If

        Dim hAddress As Integer
        Dim vBuffer As Long

        hAddress = Address
        ReadProcessMemory3(hProcess, hAddress, vBuffer, nsize, 0)
        Return vBuffer
    End Function

End Module
    Anything to ask ? Reply above .


    is this like logger or what?
    because i don't know how to use this.
    Last edited by nikazizi97; 11-28-2016 at 11:42 PM. Reason: spoiler add
    [Outdated] Weapon Hack All Server (BlackShot SEA) - 20/03
     
    [Outdated] Weapon Hack All Server (BlackShot SEA)
    [Preview] Simple Hack v0.0.1 + Weapon Hack + Aimbot [BlackShot SEA]

    Video Preview :


    Just Simple Hack v0.0.1

    Features :
    8 xDamage
    44.8 xSpeed
    xRapidFire
    Weapon2Melee



    Code:
    ========== Build: 1 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
    Reply With Quote Reply With Quote
  14. 11-29-2016 #12
    RuShi
    RuShi is offline
    Threadstarter
    Former Staff
    Contributor
    RuShi's Avatar
    Join Date
    Jan 2016
    Gender
    male
    Location
    File Not Found 404!
    Posts
    2,531
    Reputation
    210
    Thanks
    13,009
    My Mood
    Innocent
    Send a message via Birdie™ to RuShi United States H2O C95P TmatzXzoneEv
    Quote Originally Posted by nikazizi97 View Post

    is this like logger or what?
    because i don't know how to use this.
    Use It to make a trainer.


    MPGH History:
    Member: 02/1/2016
    Contributor: 29/6/2016
    Minion: 25/8/2016
    Former Staff: 07/02/2017
    Minion: 21/9/2017
    Reply With Quote Reply With Quote
  15. 11-29-2016 #13
    nikazizi97
    nikazizi97 is offline
    Expert Member
    MPGH Member
    nikazizi97's Avatar
    Join Date
    Oct 2014
    Gender
    male
    Posts
    677
    Reputation
    10
    Thanks
    590
    My Mood
    Angelic
    Send a message via Birdie™ to nikazizi97 Malaysia
    Quote Originally Posted by Luffy View Post
    Use It to make a trainer.
    if you don't mind please reply my pm,

    also what is your method to find teleport hack because tired to find teleport like tutorial in youtube.

    thanks
    [Outdated] Weapon Hack All Server (BlackShot SEA) - 20/03
     
    [Outdated] Weapon Hack All Server (BlackShot SEA)
    [Preview] Simple Hack v0.0.1 + Weapon Hack + Aimbot [BlackShot SEA]

    Video Preview :


    Just Simple Hack v0.0.1

    Features :
    8 xDamage
    44.8 xSpeed
    xRapidFire
    Weapon2Melee



    Code:
    ========== Build: 1 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
    Reply With Quote Reply With Quote
  16. 11-29-2016 #14
    RuShi
    RuShi is offline
    Threadstarter
    Former Staff
    Contributor
    RuShi's Avatar
    Join Date
    Jan 2016
    Gender
    male
    Location
    File Not Found 404!
    Posts
    2,531
    Reputation
    210
    Thanks
    13,009
    My Mood
    Innocent
    Send a message via Birdie™ to RuShi United States H2O C95P TmatzXzoneEv
    Quote Originally Posted by nikazizi97 View Post
    if you don't mind please reply my pm,

    also what is your method to find teleport hack because tired to find teleport like tutorial in youtube.

    thanks
    There's 2 easiest way to find a teleport addies I guess. First by sig scans. Second by String. Here I will leaked a second method, open C.E -> String -> Type HK 416 -> Choose the number 2 address -> Memory Search -> Then scroll up and take address on BYTE 68. Thats all if I'm not mistake.


    MPGH History:
    Member: 02/1/2016
    Contributor: 29/6/2016
    Minion: 25/8/2016
    Former Staff: 07/02/2017
    Minion: 21/9/2017
    Reply With Quote Reply With Quote

  17. The Following User Says Thank You to RuShi For This Useful Post:

    nikazizi97 (11-29-2016)
  18. 11-29-2016 #15
    nikazizi97
    nikazizi97 is offline
    Expert Member
    MPGH Member
    nikazizi97's Avatar
    Join Date
    Oct 2014
    Gender
    male
    Posts
    677
    Reputation
    10
    Thanks
    590
    My Mood
    Angelic
    Send a message via Birdie™ to nikazizi97 Malaysia
    type HK 416 ?
    second address?
    memory search?
    [Outdated] Weapon Hack All Server (BlackShot SEA) - 20/03
     
    [Outdated] Weapon Hack All Server (BlackShot SEA)
    [Preview] Simple Hack v0.0.1 + Weapon Hack + Aimbot [BlackShot SEA]

    Video Preview :


    Just Simple Hack v0.0.1

    Features :
    8 xDamage
    44.8 xSpeed
    xRapidFire
    Weapon2Melee



    Code:
    ========== Build: 1 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Previous Thread | Next Thread »

Similar Threads

  1. [Solved] Microsoft Visual Basic Express Read Write Integer File not Found Help
    By ivirusx77 in forum Blackshot Help
    Replies: 2
    Last Post: 03-03-2015, 03:38 PM
  2. Writing your own Visual Basics (v5 or v6) Trainer
    By TheRedEye in forum Game Hacking Tutorials
    Replies: 29
    Last Post: 12-09-2013, 09:56 AM
  3. [Help] Memory editing (Read/Write Process Memory)
    By wolfguardiann in forum Visual Basic Programming
    Replies: 31
    Last Post: 06-04-2011, 03:23 AM
  4. how to write/Read game memory with vb 2008
    By CodeHPro in forum Visual Basic Programming
    Replies: 33
    Last Post: 11-08-2009, 09:50 PM