GGE/2 (GG Executable / GG 2)
V0.13
PACKET SENDER IS CURRENTLY NOT WORKING - and any features that rely on sending packets are also not working.
This includes: Auto CS/CC, map rusher, etc.
Hopefully this will be fixed soon... All other features have been updated and should be working.
Just a note...
For those of you PMing me, and to everyone in general, I just wanted to let everyone know I'm currently busy working on another project so I might not get a chance to check my PMs very often. If you need to PM me, please don't hesitate to PM me, but just be mindful I might not respond within a couple of days. Also in general, yes I'm taking a break from coding GG2 so I will most likely not be providing new content for a while, however I will still keep GG2 up to date. Thanks everyone for the support and I will be back!
If there are any bugs please let me know (PMs would be the fastest choice).
Auto Login Tutorial...
What's New?
GG2.1 carries a large update that brings GG2 into the current generation of trainers. Trainers that don't need to be injected. I've always found the idea of injection trainers a bit too complicated and unnecessary and have tried to get rid of the process in the past (but failed). However since I felt an "auto login" function would benefit this trainer a lot due to the reportedly high dc rates, I decided to implement the no injector idea since that was required if I were to even think about making an auto login feature.
So with this new version we have both a trainer that needs no injector and auto login (+anti crash, which logs you right back in and re-enables all the hacks if you crash). Another difference is that I've finally changed frameworks. The .net framework is the libraries that are needed to draw the trainer and other things. I've decided to update to .net framework 4.0 due to benefits in the newer version. What does it mean for users? It simply means if the trainer doesn't work for you please download the framework from here.[B]
What's In store?
There are drawbacks to the current login system, in that it is heavily macro based, I would like to, in the future change the auto login form being macro based (recorded mouse movements/keypresses) to packet based (sending packets to log you in), simply because packet based auto login would be faster and less error-prone. The only drawback of a packet based auto login would be that you need a working packet sender and the packets may need to be updated patchly. Of course, I will also try to refine wall vac and kami more as they are 2 vacs that have great potential.[B][B]
Recommended Configurations to Botting
These two configurations are most likely the safest and most effective configs. If you are new or have been banned way too much maybe trying one of these will help:[B][B]
1. Kami - Enable these (with the specified settings):
- Kami (with default settings)
- Auto CS (timed): 300 (30 seconds)
- Auto CS (people): 0 (stay in CS for 5 seconds)
- Auto attack, skill, pot as needed (remember to set the delay for auto attack to something equal to or over 100)
- WARNING: Auto loot with kami is NOT recommended and is known to cause [increased odds of] auto bans.
- Note: Anything not specified here is best left disabled
1. Wallvac - Enable these (with the specified settings):
- Wallvac (with default settings)
- Auto CS (timed): 150 (30 seconds)
- Auto CS (people): 0 (stay in CS for 5 seconds)
- Auto attack, skill, pot, loot as needed (remember to set the delay for auto loot/attack to something equal to or over 100)
- Physical Godmode
- Note: Anything not specified here is best left disabled
MapRusher
Yep maprusher is still crippled but is usable if you follow the following instructions:
1. Go to the map rusher tab and click refresh map
2. Head over to your nearest portal and position yourself right on top of it
3. Press F11 and then press the up arrow key (this should allow you to enter the portal)
4. Check if it worked by looking for a "key" under the acquire key button
5. If it didn't work repeat steps 2-4 (you need to press F11 THEN enter the portal, also the faster you do this the better)
6. You are done! You should now be able to use maprusher normally.To use maprusher after set up, simply select a map from the list and click rush![B]
Safe Mode
For new users, safe mode is a mode that this trainer operates in that allows the trainer to function without a bypass since no bypass is publicly available right now. In other words use this trainer in safe mode. You can enter safe mode by clicking the safe mode button in the toolbox at the very top of the trainer then follow the instructions in the pop up. NOTE: The trainer is-by default-in safe mode.
[B][B]
Updating
GG2 like GGTrainer is equipped with fully dynamic pointers. In layman terms this trainer can update itself to work on any version of maplestory (ok maybe not any)! To update the trainer click on the update button in the toolbar. The toolbar is located at the very top of the trainer. There you will see an assortment of buttons with icons. If you are not sure which button is the update button, keep hovering your mouse over the icons till you read one that says update!
[B][B][B]
Change Log
v0.13
[!]Updated pointers to latest version and fixed minor bugs in GGE
v0.12
[!] Updated pointers to the latest version[B][B]
v0.11
[!] Fixed bugs: "@" can now be typed
[!] Added characters 1-100
[!] Added minor changes to auto login[B][B][B]
Trainer not showing up?
GG2 requires .net framework 4.0 or above and certain dependencies that can be acquired through the VS 2008 redistributable package.
[B]You can get the files here:
Download: Microsoft .NET Framework 4 (Web Installer) - Microsoft Download Center - Download Details
Download: Microsoft Visual C++ 2010 Redistributable Package (x86) - Microsoft Download Center - Download Details
64 bit OS?
Download: Microsoft Visual C++ 2010 Redistributable Package (x64) - Microsoft Download Center - Download Details