Hello I'm Plyable as you may of notice from my username :P
This tutorial is just showing you how to use 'MW3 .NET External ESP v2.4 [1.7.413]' by master131 with best settings, by this I mean best settings not to get caught.
When you download it you will notice you get two files;
If you read the original post master131 (original creator) tells you how to use it with default settings and such.
Open up the 'config.mw3esp' file with notepad or notepad++ or any text editor.
You should get something like this;
After that scroll down to find 'Aimbot Settings'.
You'll notice a few settings but the most important in this tutorial being 'BOT_MAX_DIST = ###'.
Default is '200' but this setting decides how close the enemy has to be to the center of your screen before it aims at them (in pixels). To make it less obvious when using the aimbot you should change this much lower to around '50' - '80' because this allows you to hold down you aim key and keep aiming at a specific point at where you know somebody is going to appear from (most probably because of the ESP built in) and 9 times out of 10 they will be running around the corner so if anyone is spectating you and see you suddenly started to aim perfectly at someone behind a wall then they appear its going to look...odd. This low setting means that you'll be able to successfully hide the aimbot because the enemy will run around the corner before the aimbot activates and aims at them. The time this fails is when they slowly sneak around the corner of which you can either stop aiming until they are around the corner or hope no one is spectating you, just check the leaderboards quick to see if anyone on your team is dead and if not, go crazy .
For using the wall hack I can't stress this enough and I've lost count on how many people pre-aim at someone through a wall and wait until they move around the corner. This is what gets you banned by BanCandy and her minion because its just so obvious your using ESP. To help prevent your demise to BanCandy and her minion, notice where they are and acknowledge the possibility they they will go around the corner and simply instead of aiming at them through the wall and even sometimes shooting them through the wall aim at the doorway, or entrance and aim slightly away from them then once you notice they've just gone around the corner move onto them and fire away.
Also in the settings if you don't want to see ESP boxes around friendly or dead players just change the current settings of them to '0x000000FF' without quotes.
E.G:
Before;
After;Code:COLOR_FRIENDLY = 0x7F0000FF COLOR_ENEMY = 0x7F0000 COLOR_DEAD = 0x7F7F7F7F
The 'After' code gets rid of ESP boxes appearing around Friendly and Dead players and only appears around Enemy players.Code:COLOR_FRIENDLY = 0x000000FF COLOR_ENEMY = 0x7F0000 COLOR_DEAD = 0x000000FF
I do realise to many this is a really pointless thread but to others, mainly noobs or people looking for possibly the best settings for this amazing hack its quite useful.
Thanks for reading and I hope this helps in anyway.
Happy hacking,
Plyable