Xorr: XorrRapidFire (Made Easy) + Support RF Developers - Fixed

[DConan12]

@Xorr dun have error but dont work

[NoEntryPhc]

why my blackshot got detected???

[angah89]

@Xorr dun have error but dont work

got error or dont work..
u should try "manual" ( press "m" or "M" )..
and press "enter" 2 second before popup blackscreen of ur blackshot..

[aimanmuluk]

Its not working because of my RAM is 2.00GB so its a bit lagger. My rapid have to paste 3 sec before blackscreen appear. My Blackscreen appear around 13 sec btw nice release

[Xorr]

why my blackshot got detected???

Was there any detection message?

[aimanmuluk]

got error or dont work..
u should try "manual" ( press "m" or "M" )..
and press "enter" 2 second before popup blackscreen of ur blackshot..

ROFL .. is that have a manual ??

[Xorr]

Its not working because of my RAM is 2.00GB so its a bit lagger. My rapid have to paste 3 sec before blackscreen appear. My Blackscreen appear around 13 sec btw nice release

Did you try the manual mode? Key is 'm'. Lol.

Type in 'm' BUT do not press enter key yet (until you want to).

[aimanmuluk]

Did you try the manual mode? Key is 'm'. Lol.

Type in 'm' BUT do not press enter key yet (until you want to).

means now i have to press any key and hold enter to restore back ? cause i want to try manual :P

[Xorr]

means now i have to press any key and hold enter to restore back ? cause i want to try manual :P

Okay so to use manual mode you have to enter 'm'. So do this:

*Launch XRF
*Type in 'm' or 'M' BUT DO NOT press the enter key*
*Launch BlackShot
*Wait for x amount of time
*Press enter
*Enjoy

[ZERO_HUSTL3R]

@Xorr I've been follow your steps from start til it says completed but when I run the the BlackShot after gameguard disappear it says "Script Error"....

What's the problem?

[aimanmuluk]

@Xorr I've been follow your steps from start til it says completed but when I run the the BlackShot after gameguard disappear it says "Script Error"....

What's the problem?

thats mean not XorrRapidfire is not work .. but some your hack is unavailable ..

[CooLElement19]

Okay so to use manual mode you have to enter 'm'. So do this:

*Launch XRF
*Type in 'm' or 'M' BUT DO NOT press the enter key*
*Launch BlackShot
*Wait for x amount of time
*Press enter
*Enjoy

how to use manual..i enter M but on command show restoring original file..

how to paste the moddifier.. any key for manual?

[Xorr]

@Xorr I've been follow your steps from start til it says completed but when I run the the BlackShot after gameguard disappear it says "Script Error"....

What's the problem?

@ZERO_HUSTL3R
You did it wrong.

First you need to setup XRF. The Backup folder is where you will make an extra copy of your original BS weapon files. The Original folder is where you will make a copy of your original BS weapon files. The Modified folder is where you will place any modified BS weapon files. XRF DOES NOT provide any modified BS weapon files. Meaning, you have to download it else where and extract it to the Modified folder.

Okay, now the first step is to run XRF as administrator. The second step is to enter in the command key. Y = Rapid fire mode, M = Manual mode, and any other key is for Restore mode. If you are planning on using rapid fire mode, you need to enter the Y key and wait for the permission to launch BlackShot. After XRF allows you to launch BS, you need to do so. Log in and wait. If XRF succeeded, you will see a message box.

If you are planning on using manual mode, you need to TYPE in the M key BUT DO NOT HIT THE ENTER KEY. After that, you need to launch BlackShot. Wait for GameGuard.des to appear and to disappear wait for x amount of time (whatever you want). When you think its time, hit the enter key.

If you are planning on using the restore mode, you need to enter any other keys (don't enter 'y' or 'm'). Make sure BlackShot.exe is not running.

---------- Post added at 03:36 PM ---------- Previous post was at 03:35 PM ----------

how to use manual..i enter M but on command show restoring original file..

how to paste the moddifier.. any key for manual?

@CooLElement19
Use XRF 3.1.

[aimanmuluk]

@Xorr why everyone got error/script error etc. but for me its work perfectly .. btw thanks very much for release this hack .. and now i will push button thanks to you

[Xorr]

@Xorr why everyone got error/script error etc. but for me its work perfectly .. btw thanks very much for release this hack .. and now i will push button thanks to you

Thank you. I am not sure. Probably my fault. xD