DAFUQ? [hyper 212+]

[w4ssup]

so today i got my hyper 212 plus and it took a while to installed but the problem is that my cpu temp is now higher then it was when i had my stock cooler... dafuq? my stock cooler gave me around 33c but the hyper 212+ is giving me 48c wtf is going on???? also i put a pea size thermal paste on

[jwgering]

.

Please work on your grammar, and it appears to be a common problem with that CPU cooler from the quick Google search I did, but you might need to check if its seated correctly and you also might want to try a different thermal paste.

[w4ssup]

nvm... restarted it and it went down... but it's the same temp as the stock fan cooler.... should it be cooler than the stock?

Please work on your grammar, and it appears to be a common problem with that CPU cooler from the quick Google search I did, but you might need to check if its seated correctly and you also might want to try a different thermal paste.

lol sorry, and what do you mean by seated?

[jwgering]

.

It depends on what your previous CPU cooler was, but the difference in CPU's (depending on your previous CPU cooler type) should just be that your new CPU cooler is more reliable.

[w4ssup]

It depends on what your previous CPU cooler was, but the difference in CPU's (depending on your previous CPU cooler type) should just be that your new CPU cooler is more reliable.

my previous cpu cooler is a stock cooler that came with my cpu

[jwgering]

my previous cpu cooler is a stock cooler that came with my cpu

Alright, well then you either need to use a different thermal paste, check its seated properly, or your stock CPU is all you needed.

[w4ssup]

Alright, well then you either need to use a different thermal paste, check its seated properly, or your stock CPU is all you needed.

still dont know what "seated" mean

[[MPGH]Doc]

still dont know what "seated" mean

Make sure it's seated flush or square. Also all coolers will remain the same temp at idle and will never go below room temp without active cooling. Also the cooler will only ever be as effective as the rest of your cooling. The reason why you get an aftermarket cooler is because it will have lower temps during load. The idle temps are always going to be roughly the same.

[w4ssup]

Make sure it's seated flush or square. Also all coolers will remain the same temp at idle and will never go below room temp without active cooling. Also the cooler will only ever be as effective as the rest of your cooling. The reason why you get an aftermarket cooler is because it will have lower temps during load. The idle temps are always going to be roughly the same.

oooo ok :P

[Aborted]

will never go below room temp without active cooling

​Apparently he was expecting exothermic reactions.