Regularly updated community macro thread [X7 Mouse]

[mattyplant]

Make a break in the link.
Ex: (mpgh . net)

virusscan.jotti. org/en/scanresult/bb52766b5c215c15ba2e8baa6c242e00783fa33f
virustotal. com/en/file/5ca5186668542f015dfa5a6e9b9a5835ececa6b27e38b9d47d 18301f1bdf82fa/analysis/1397229026/

[bullpop]

Cannot PM either just mentioned that pal, this was literally my first post

Didn't notice that. But do as @Mayion said. Make a break in the link!

[omatko]

I have Bloody R- series mouse
Macros require a report rate of 1000Hz.
Bloody R- series mouse = Transmission Frequency: 512 Hz (3 versions).

Is this reduces the accuracy of the macro?

Edit:
What is the difference between the V8 and V8M?

Edit: sry my eng [trans]

[Protocolv2]

no need to change the setting of resolution/record sens

are you using the correct sensitivity setting and mouse setting? check again with the guides on my YT channel description

are you using the correct attachments and optics?

by default, if you do not assign a macro (MGN, BWP) to any of the 3/N/4 button, they will be "burst" or "full auto" pre programmed macro (not work very well)

Attachments = Correct [As said]
Sensitivity & Mouse Settings = 3200dpi and 1000hz as Polling Frequency
Ingame = FOV = 90 , and that Ads thing is OFF ..

oh and I havent set anything else than this Headshot Macro for "3" key , We have to set Macro (Mgn/Bgp) as well ,
Wait browsing your Channel

[[MPGH]Mayion]

Attachment approved.

[Yellow 13]

I have Bloody R- series mouse
Macros require a report rate of 1000Hz.
Bloody R- series mouse = Transmission Frequency: 512 Hz (3 versions).

Is this reduces the accuracy of the macro?

Edit:
What is the difference between the V8 and V8M?

Edit: sry my eng [trans]

1000hz reduces sensor prediction = more accurate movement (macro not really affected)
V8= standard feet (teflon)
V8M= metal feet (less friction when swiping)

Attachments = Correct [As said]
Sensitivity & Mouse Settings = 3200dpi and 1000hz as Polling Frequency
Ingame = FOV = 90 , and that Ads thing is OFF ..

oh and I havent set anything else than this Headshot Macro for "3" key , We have to set Macro (Mgn/Bgp) as well ,
Wait browsing your Channel

can you do a test outside of the game? if the mouse moves down and left on the M416 macro it should be working as intended

[DylanLee98]

FAMAS macro plesh?
I would greatly appreciate it!

[Yellow 13]

FAMAS macro plesh?
I would greatly appreciate it!

A donation speaks greater than your appreciation.

PM me

[ruanvdk]

Since you started creating macros with "if key 2 is not pressed jump to line 1" it never worked for me anymore...
This as val is an example. It just doesnt work for me.
i tried to bind it for N/3 and tried to bind it for the side button of the mouse. Didn't work.

Wierd thing tho: if i remove these "if key 2 ...." lines then the macro works but not properly, of course...
Do you know what could be?

Thank you sir!

[mastermasterj]

Sir yellow do you have a macro for AWS? I've been using it and loving it i think this will be my permanent gun..

also i have bouught a new a4 tech mouse here in india so im gona try all the previous macros you posted.

thank you so much again

[Yellow 13]

Since you started creating macros with "if key 2 is not pressed jump to line 1" it never worked for me anymore...
This as val is an example. It just doesnt work for me.
i tried to bind it for N/3 and tried to bind it for the side button of the mouse. Didn't work.

Wierd thing tho: if i remove these "if key 2 ...." lines then the macro works but not properly, of course...
Do you know what could be?

Thank you sir!

hmm, do you have an outdated oscar X7 software? download the latest one and see if it helps -> https://www.x7.cn/en/download.asp (OSCAR X7) or https://www.bloody.tw/cn/Download.php (BLOODY X7)

Do you have "toggle ADS" in setting? (press to aim, press again to not aim) because you need to "hold to aim")

I use the VAL on 4 button on demo video, and N in game. No problems


@mastermasterj PM me if you want to request

[greyjoy]

Hi just want some information before I buy a bloody mouse. Is it possible to bind the macro on the left mouse button or you can only bind it to the side button?1

[Yellow 13]

Hi just want some information before I buy a bloody mouse. Is it possible to bind the macro on the left mouse button or you can only bind it to the side button?1

read first page

[bartolica]

@Yellow 13
how do I convert macros so I can use them with N/3 button ?

[ruanvdk]

hmm, do you have an outdated oscar X7 software? download the latest one and see if it helps -> https://www.x7.cn/en/download.asp (OSCAR X7) or https://www.bloody.tw/cn/Download.php (BLOODY X7)

Do you have "toggle ADS" in setting? (press to aim, press again to not aim) because you need to "hold to aim")

I use the VAL on 4 button on demo video, and N in game. No problems


@mastermasterj PM me if you want to request

Hello!

My fault. Hehe! I didn't noticed that "If ads ISN'T pressed, then don't use the macro..." was there.
I thoguht it was like, if fire button was pressed then use macro. :P Or .. if the ads is there, then use the macro.

But ok.

Another thing,
I don't like to ask it, but, any ETA on the AEK macro?

Just a tip: if you gonna do full auto, don't use heavy barrel in the Loadout.
Cause sometimes we will need to burst the aek in long range targets, and with heavy barrel the gun goes up like crazy (the macro dont compensate it, or.. you can make it compensate for it but I'm noob at it i'm just starting ;p)

It will compensate of course if you do a burst macro for AEK, i think it's not the case, because aek power is full auto.

I made one macro for aek myself, full auto, without heavy barrel. That way i can shoot them out in close range full auto, and burst manually in long ranges.