[RELEASE] All Maps Packets

Printable View

Show 40 post(s) from this thread on one page

08-06-2008
brianfan

1 Attachment(s)

[RELEASE] All Maps Packets

Code:

4C 03 00 00 0E 00 00 00 4C 03 0E 00 00 00 02 00 00 00 03 00 00 00 tower

Code:

4C 03 00 00 0E 00 00 00 4C 03 0E 00 00 00 02 00 00 00 00 00 00 00 snow

Code:

4C 03 00 00 0E 00 00 00 4C 03 0E 00 00 00 02 00 00 00 01 00 00 00 gray

Code:

4C 03 00 00 0E 00 00 00 4C 03 0E 00 00 00 02 00 00 00 02 00 00 00 Junk

Code:

4C 03 00 00 0E 00 00 00 4C 03 0E 00 00 00 02 00 00 00 04 00 00 00 Pump

Code:

4C 03 00 00 0E 00 00 00 4C 03 0E 00 00 00 02 00 00 00 06 00 00 00 Cold

Code:

4C 03 00 00 0E 00 00 00 4C 03 0E 00 00 00 02 00 00 00 08 00 00 00 WAR

Code:

4C 03 00 00 0E 00 00 00 4C 03 0E 00 00 00 02 00 00 00 05 00 00 00 Brush

Code:

4C 03 00 00 0E 00 00 00 4C 03 0E 00 00 00 02 00 00 00 07 00 00 00 Sand
08-06-2008
viper131

and we do what with these?
08-06-2008
Dave84311

Send them with WPE.
08-06-2008
Rajinn

you could just say change the 4th from last [edit] byte of the [/edit] packet to the map you want.
08-06-2008
manman523

U missed sand
08-06-2008
Rajinn

4C 03 00 00 0E 00 00 00 4C 03 0E 00 00 00 02 00 00 00 07 00 00 00 Sand
08-06-2008
brianfan

Quote:

Originally Posted by ******

4C 03 00 00 0E 00 00 00 4C 03 0E 00 00 00 02 00 00 00 07 00 00 00 Sand

thanks didnt scroll far enough in my notepad doc. I'll add it to them
08-06-2008
Banshou

Brian, I know a posted a thread but I figured you'd know. When I send these packets while hosting the server (In server lobby) I get an error message when I goto invite ect, and if I start, it doesn't start that map. (Error is "Lost Connection to Server" and I crash)
08-06-2008
brianfan

Quote:

Originally Posted by ******

you could just say change the 4th from last [edit] byte of the [/edit] packet to the map you want.

even faster just download my table and tick the one you want to send
08-06-2008
Rajinn

Quote:

Originally Posted by brianfan

even faster just download my table and tick the one you want to send

i guess, im just a manual kinda guy :)
08-06-2008
megaspeek

anyone know rattle snake?
08-06-2008
brianfan

Quote:

Originally Posted by Banshou

Brian, I know a posted a thread but I figured you'd know. When I send these packets while hosting the server (In server lobby) I get an error message when I goto invite ect, and if I start, it doesn't start that map. (Error is "Lost Connection to Server" and I crash)

make a room password it at first, start recording packets in WPE, go into shop. Get you send ID from WPE. Right click on the first IP address that pops up after you stop sending packets, chose set send scokect with this port( or whatever yours might say. It's the last option after you right click.) Then tick only 1 map and send
it once at 100 mill. seconds. Go back in game and enjoy you dont have to invite people they come once you un-password the room. For your buddies just tell them the password and have them right on your name and JOIN this user in room
08-06-2008
Deject3d

lol?

i posted the original packet and the list of ID's on ***.. it's copied / pasted on this place somewhere..

any monkey could figure out where to put the ID in the packet.
08-06-2008
Rajinn

deject3d, just because your the first leaker doesnt mean your the only person who knew about it o.0
08-06-2008
Deject3d

Quote:

Originally Posted by ******

deject3d, just because your the first leaker doesnt mean your the only person who knew about it o.0

I would sure I hope i'm not the first person to find it.

otherwise the CA community is full of nub haxors.

p.s- I was just stating that this topic is a little bit pointless since the ID's are already in another topic.
08-06-2008
brianfan

Quote:

Originally Posted by Deject3d

lol?

i posted the original packet and the list of ID's on ***.. it's copied / pasted on this place somewhere..

any monkey could figure out where to put the ID in the packet.

alot of people did not figure that out. Also if copied and pasted it why didnt add to fourm by posting a send file (*.spt)

And on another note I tried looking for the Map packets here and other places the only one that I could find was for Two Tower's nobody was telling the packets for the other two maps. Which made me have to do it myself, which turned out to be a fun packet sending adventure I learned how to Kick people from the room, Change room game type's and a few other things :D
08-06-2008
Deject3d

Quote:

Originally Posted by brianfan

alot of people did not figure that out. Also if copied and pasted it why didnt add to fourm by posting a send file (*.spt)

And on another note I tried looking for the Map packets here and other places the only one that I could find was for Two Tower's nobody was telling the packets for the other two maps. Which made me have to do it myself, which turned out to be a fun packet sending adventure I learned how to Kick people from the room, Change room game type's and a few other things :D

https://www.mpgh.net/forum/164-combat...cked_maps.html

all map ID's, stickied topic. copied from ***.

and honestly, if you couldn't find them out.. it's just 3, 5 and 7.

which, if you look at the packets for the maps you _can_ use, it's in order.
08-06-2008
brianfan

Quote:

Originally Posted by Deject3d

I would sure I hope i'm not the first person to find it.

otherwise the CA community is full of nub haxors.

p.s- I was just stating that this topic is a little bit pointless since the ID's are already in another topic.

That topic only gives you the Map ID and 1 byte of a 22 byte packet.
Yes you can change the little map picture but you can't play it using that method
And once again the only Map Packet is for Two Towers there, Why not have them all
08-06-2008
Rajinn

Quote:

Originally Posted by Deject3d

I would sure I hope i'm not the first person to find it.

otherwise the CA community is full of nub haxors.

p.s- I was just stating that this topic is a little bit pointless since the ID's are already in another topic.

misunderstood, apologies..
yeah the ids are posted in the how to play locked maps.

brian: yeah the ids are posted, the method might not work as well, but the ids are there.
08-06-2008
brianfan

Quote:

Originally Posted by ******

misunderstood, apologies..
yeah the ids are posted in the how to play locked maps.

brian: yeah the ids are posted, the method might not work as well, but the ids are there.

lol the method wont work at all. Even if your name is Darkbyte or Spiro no UCE will let you play the map it will revert back to the map it was at before you changed the "map ID"
This topic isnt about map ID's
It's about Map Packets
08-06-2008
Deject3d

Quote:

Originally Posted by brianfan

lol the method wont work at all. Even if your name is Darkbyte or Spiro no UCE will let you play the map it will revert back to the map it was at before you changed the "map ID"
This topic isnt about map ID's
It's about Map Packets

Who the fuck said anything about a UCE?

Please, just stop.

Here, let me make it as clear as daylight for you~

from sticky topic:

Map Values:

snow valley 0
grey hammer 1
junk flea 2
two towers - 3
pump jack 4
brush wood - 5
cold seed - 6
sand hog - 7
warhead 8

WHOA LOOK, THAT ISN'T IN HEX YOU NUB! WHATEVER DUDE YOU'RE WRONG YOU CANT UCE THOSE YOU SUK NUB

no, wrong.

same EXACT thing as in byte 19 of the map packet

Map Values:

snow valley 00
grey hammer 01
junk flea 02
two towers - 03
pump jack 04
brush wood - 05
cold seed - 06
sand hog - 07
warhead 08
08-06-2008
daddyi

Hey Alex, you finally got the account made eh?
08-06-2008
Rajinn

um, the packet is the "set map" packet, the ID is used within that packet (listed by deject3d above me), use that ID in the set map packet and theres your hack.
08-06-2008
brianfan

Quote:

Originally Posted by Deject3d

Who the fuck said anything about a UCE?

Please, just stop.

Here, let me make it as clear as daylight for you~

from sticky topic:

Map Values:

snow valley 0
grey hammer 1
junk flea 2
two towers - 3
pump jack 4
brush wood - 5
cold seed - 6
sand hog - 7
warhead 8

WHOA LOOK, THAT ISN'T IN HEX YOU NUB! WHATEVER DUDE YOU'RE WRONG YOU CANT UCE THOSE YOU SUK NUB

no, wrong.

same EXACT thing as in byte 19 of the map packet

Map Values:

snow valley 00
grey hammer 01
junk flea 02
two towers - 03
pump jack 04
brush wood - 05
cold seed - 06
sand hog - 07
warhead 08

If your going to Quote. Please Quote the whole post. And now For the whole Quote

Quote:

Originally Posted by csnreyes

1. Go in game, and create a room with snow valley map.
2. Search for 0
3. Change to grey hammer.
4. Search for 1.
5. Change to junk flea
6. Search for 2
7. Repeat with the different maps until you have a few addys left. Freeze them at the value of the map you want.

Map Values:

snow valley 0
grey hammer 1
junk flea 2
two towers - 3
pump jack 4
brush wood - 5
cold seed - 6
sand hog - 7
warhead 8

Important Info:

- Seeing as you will be playing a map THAT ISNT RELEASED YET, this is HIGHLY detectable.

Please take note of step 2, step 4, and step 6. If that isnt a UCE then you can blindfold me, spank me, and call me Sally
And finally for the last time This topic is about Map Packets, not Map ID's, nor is it leaving out the rest of the packet and only giving you byte 19 of a 22 byte packet.
08-06-2008
Rajinn

*sigh* some people are just hardheaded.
08-06-2008
jerry0

Why not read my tut, its perfectly explained. Even added how to change number of points.
08-06-2008
brianfan

Quote:

Originally Posted by jerry0

Why not read my tut, its perfectly explained. Even added how to change number of points.

Yes your tut. is well written. https://www.mpgh.net/forum/164-combat...p_wpe_pro.html
PS did you know byte 15 is the game mode i.e One man army, S&D...
08-06-2008
jerry0

Wow really I never thought of actually messing with because everytime i join CA, I get flooded with Friend requests/messages. So I have to powerlevel people.
08-06-2008
Rajinn

Quote:

Originally Posted by brianfan

Yes your tut. is well written. https://www.mpgh.net/forum/164-combat...p_wpe_pro.html
PS did you know byte 15 is the game mode i.e One man army, S&D...

is theres a hidden mode? lol
08-06-2008
brianfan

Quote:

Originally Posted by ******

is theres a hidden mode? lol

not that I have found, but dont send that byte to map that doesn't support that mode for example S & D on Two Towers = instant crash
08-06-2008
jerry0

Brian you wouldn't happen to know why a lot of people are starting to crash on the new maps. Yesterday it worked fine and today, like 40% of the people in the map crash.
08-06-2008
brianfan

make sure there are at 3 people on the room before you start the round on the hidden map.
Also Vista users that have updated to SP1 are having that issue
08-06-2008
jerry0

I started the game with an 8 v 8 and like 4 of them insta left.
08-06-2008
Deject3d

Quote:

Originally Posted by brianfan

If your going to Quote. Please Quote the whole post. And now For the whole Quote

Please take note of step 2, step 4, and step 6. If that isnt a UCE then you can blindfold me, spank me, and call me Sally
And finally for the last time This topic is about Map Packets, not Map ID's, nor is it leaving out the rest of the packet and only giving you byte 19 of a 22 byte packet.

yes, that topic was a UCE tutorial.

yes, this topic is about map packets.

yes, the only difference between the map packets is the ID. if you have the map change packet and the list of ID's - you can go on any map. basically rendering this topic useless as it was when originally posted. maybe if you add something that hasn't been posted multiple times..
08-06-2008
MortalDefiance

Quote:

Originally Posted by Banshou

Brian, I know a posted a thread but I figured you'd know. When I send these packets while hosting the server (In server lobby) I get an error message when I goto invite ect, and if I start, it doesn't start that map. (Error is "Lost Connection to Server" and I crash)

That happened to me once. My guess is the server rejecting you because you sent a packet that's not allowed or something, lol.
08-06-2008
KakashiRock

Quote:

Originally Posted by viper131

and we do what with these?

In the WPE packet editor follow the tutorial.

Then find the id of the map you want to go to and paste it in a page thing in the send section of WPE.
08-06-2008
alexdevill

where do we put the code?
08-06-2008
brianfan

Quote:

Originally Posted by alexdevill

where do we put the code?

download the rar file.
extract it to you desktop
open up WPE Pro
look towards the bottom of the WPE Pro you will see a little tab with tthe words Filter on it and another one with the words Send
Click the Send tab
Look above the blank spot that looks like a school ruled notepad
4 icons from the left is a folder looking icon Click that
Browse to your desktop and open the Extracted file that I uploaded in the first post.
Tick/check/mark the map that you want and enjoy

any other questions Please read the tut by Jerry0 here https://www.mpgh.net/forum/164-combat...p_wpe_pro.html
02-27-2010
Hakkar55

Awesome man !
02-27-2010
|-|3|_][({}PT3R12

Hmmm i got a good and bad out of this:

Bad: Heli is confused =\

Good: Heli made Chams for KOS >;D

Show 40 post(s) from this thread on one page

All times are GMT -6. The time now is 11:54 PM.

Resources saved on this page: MySQL 22.22%