Dead by Daylight – Wallhack (for Survivors, reveal a Killer's aura)

[hex-X]

This method of wallhack is to replace one string line in the game file – pakchunk0-WindowsNoEditor.
For this you need a hex editor and a survivor perk calling Bond (Dwight Fairfield).


I will use HxD – freeware hex editor, I recommend it to you too, but you can also use another hex editor if you like.
------------------------------------------------------------
All actions were performed on the Steam version of the game. On other versions, such as Microsoft Store or Epic Games, the method may be different.
Will Easy Anti-Cheat detect this? No, it won't! I played with this method all week and at one time I did not get a message like: "EAC has detected that game files have been modified".
I hope the developers will patch this method, because it is too easy to execute and it is also not detected by the game's anti-cheat. But for now, enjoy!

Let's start!

 

1. Launch the hex editor.
2. In the hex editor: File -> Open -> go to the following path ...steamapps\common\Dead by Daylight\DeadByDaylight\Content\Paks.
3. Choose the following file: pakchunk0-WindowsNoEditor.
4. In the hex editor press the keyboard shortcuts Ctrl + F, the search window will open.
5. In the "Text-string" tab in the "Search for" field, enter the word: Bond. Also, in the "Search direction" panel, select the "All" checkbox and press OK button.


6. After finding this string line, scroll down a bit and find the following string line: GameplayModifierType.RevealAllSurvivorsInRange


7. Highlight the following string line: RevealAllSurvivorsInRange


As you can see, in hexadecimal (the panel on the left), this string line starts at byte 52 and ends at byte 65.

8. Place the cursor on byte 52 and overwrite all values with zeros, up to 65 byte. It should look like the screenshot:


9. In the "Decoded text" panel (the panel on the right), place the cursor on the red dot, that is, after the following letters: "difierType."(so that byte 00 is highlighted on the left, after byte 2E) as in the screenshot:


10. Now copy the following text line – RevealKillerInRange and mouse right click on the place where you had the cursor positioned in the hex editor and select "Paste write".


You should have something like this:


Now in the hex editor: File -> Save. When saving, a window will pop up about creating a backup copy of the file, you can undo this action.

Ready!
Now you will always see the Killer's aura within 20/28/36 meters (depending on the level of the perk) from your position.


Result -->

Before:



After:

[mqluus]

Thanks. But it is not applicable to Epic. Looks like the paks file is encrypted.

[blackfrog1]

Now everyone with the perk bond will be reported do u think after getting reported the devs can check if you made changes to your game files and ban you ?

[hex-X]

Now everyone with the perk bond will be reported do u think after getting reported the devs can check if you made changes to your game files and ban you ?

So it doesn't even detect by EAC, so how can they know that you changed your game files?

[zepc007]

the pictures were gone, nothing shows up

[OPbush]

could this work for a killer perk as well?

[hex-X]

the pictures were gone, nothing shows up

Pictures just don't load in the post?

- - - Updated - - -

could this work for a killer perk as well?

Same method for the Killer perk I'll post it tomorrow

[zepc007]

Yes, we can't see these pictures

- - - Updated - - -

Pictures just don't load in the post?

- - - Updated - - -


Same method for the Killer perk I'll post it tomorrow

Yes, we can't see these pictures

- - - Updated - - -

Pictures just don't load in the post?

- - - Updated - - -


Same method for the Killer perk I'll post it tomorrow

maybe my network doesn't work well, i can see them now

- - - Updated - - -

It works, so op, very good.

[mqluus]

@hex-X: Any way for Epic?

[hex-X]

@hex-X: Any way for Epic?

If u said that the paks are encrypted there, then I think there is nothing you can do
Of course, I could have looked paks but i dont have Epic Games version of the game

[HeckingBoi321]

This method of wallhack is to replace one string line in the game file – pakchunk0-WindowsNoEditor.
For this you need a hex editor and a survivor perk calling Bond (Dwight Fairfield).


I will use HxD – freeware hex editor, I recommend it to you too, but you can also use another hex editor if you like.
------------------------------------------------------------
All actions were performed on the Steam version of the game. On other versions, such as Microsoft Store or Epic Games, the method may be different.
Will Easy Anti-Cheat detect this? No, it won't! I played with this method all week and at one time I did not get a message like: "EAC has detected that game files have been modified".
I hope the developers will patch this method, because it is too easy to execute and it is also not detected by the game's anti-cheat. But for now, enjoy!

Let's start!

 

1. Launch the hex editor.
2. In the hex editor: File -> Open -> go to the following path ...steamapps\common\Dead by Daylight\DeadByDaylight\Content\Paks.
3. Choose the following file: pakchunk0-WindowsNoEditor.
4. In the hex editor press the keyboard shortcuts Ctrl + F, the search window will open.
5. In the "Text-string" tab in the "Search for" field, enter the word: Bond. Also, in the "Search direction" panel, select the "All" checkbox and press OK button.


6. After finding this string line, scroll down a bit and find the following string line: GameplayModifierType.RevealAllSurvivorsInRange


7. Highlight the following string line: RevealAllSurvivorsInRange


As you can see, in hexadecimal (the panel on the left), this string line starts at byte 52 and ends at byte 65.

8. Place the cursor on byte 52 and overwrite all values with zeros, up to 65 byte. It should look like the screenshot:


9. In the "Decoded text" panel (the panel on the right), place the cursor on the red dot, that is, after the following letters: "difierType."(so that byte 00 is highlighted on the left, after byte 2E) as in the screenshot:


10. Now copy the following text line – RevealKillerInRange and mouse right click on the place where you had the cursor positioned in the hex editor and select "Paste write".


You should have something like this:


Now in the hex editor: File -> Save. When saving, a window will pop up about creating a backup copy of the file, you can undo this action.

Ready!
Now you will always see the Killer's aura within 20/28/36 meters (depending on the level of the perk) from your position.


Result -->

Before:



After:

Is there a way to undo this, if so could you explain it please?

Thank you!

[hex-X]

Is there a way to undo this, if so could you explain it please?

Thank you!

In order to undo this change, overwrite RevealAllSurvivorsInRange instead of RevealKillerInRange use the same method

[mqluus]

If u said that the paks are encrypted there, then I think there is nothing you can do
Of course, I could have looked paks but i dont have Epic Games version of the game

Can you look this file? drive .google .com/file/d/1-djxI18LBJGP5xRaqouI4JjKZ_1jc3v9/view?usp=sharing

[poweel]

On other versions, such as Microsoft Store

the .pak's on both Epic and MS are encrypted.
as @MQLuss said, they can't see Epic's and I can't see MS Store's.
rip.




me: *buys steam version 5 minutes later*

[hex-X]

the .pak's on both Epic and MS are encrypted.
as @MQLuss said, they can't see Epic's and I can't see MS Store's.
rip.




me: *buys steam version 5 minutes later*

It's a pity
-----------
Just wondering why paks are encrypted everywhere except Steam