[FASM/C/Windows]Importing libraries without any IATs (good for hacks)

IAT = Import Address Table

When I first decided to share this, I didn't know whether to release it under the Assembly/C or Tutorial section since it is mostly source code, but I am also trying to show a concept that CAN be ported to some other languages. So, I've decided to put it in the tutorial section.

As you may know, when you launch a program through Windows API, it automatically reads and parses the headers of the executable. This tutorial will teach you how to avoid adding an "import" (.idata) section. This can also be done easily in C, which I show later.

First off, a little background on the Windows API. Windows API has a segment for itself that contains procedures of the Windows environment itself. It is loaded into register FS. It contains kernel information, system call tables, etc. Since we can access this register freely within a program, it is possible to call some Windows API functions loading a single library (pure assembly!). However, this destroys your compatibility rating with other Windows systems. Some addresses in the API, though, are standard across Windows systems, so you should feel free to use them at your discretion.

So let's get down to the nitty gritty...

Requirements:

Windows OS (tested on an x64 Windows 7 machine)
Brain
Knowledge of Assembly/Machine Language (and you may NEED to use it depending on the language)

Assembler (Intel syntax) Style!

All programs loaded through Windows API are automatically loaded with ntdll.dll (Core system functions), kernel32.dll (Windows "kernel"), and KERNELBASE.DLL (Another Windows "kernel"). These libraries can actually be accessed without having to load them through an import table, with the power of Windows API (Sometimes it shines, sometimes it just flat out sucks... Mostly the second part).

Basically we're going to create an importer by getting LoadLibraryExA from KERNELBASE.DLL (It doesn't have LoadLibraryA).

First step is to get the base address of either Kernel32.dll or KERNELBASE.DLL. We can get KERNELBASE.DLL with the Windows API.

Code:

GetKERNELBASE:
	mov eax,[fs:0x30]
	mov eax,[eax+0x0c]
	mov eax,[eax+0x1c]
	mov eax,[eax]
	mov eax,[eax+0x08]
	ret

This function gets the base address of KERNELBASE.DLL in your application through a series of Windows API pointers.

Next we need to create our own GetProcAddress function.

Code:

MyGetProcAddress:
	push ebp
	mov ebp,esp
	push ebx
	push ecx
	push esi
	push edi
	mov dword eax,[ebp+8]
	mov [.modb],eax ;Get module base address
	mov dword eax,[ebp+12] ;String to cmp
	mov [.fname],eax
	mov eax,[.modb]
	add eax,60
	mov eax,[eax] ;get e_lfanew
	add eax,[.modb] ;PE Header
	add eax,0x78 ;now points to export directory address
	mov eax,[eax] ;... and get that address
	add eax,[.modb]
	mov [.ied],eax
	mov ebx,[eax+24] ;get the number of names
	mov [.non],ebx
	mov ebx,[eax+28] ;get the addresses of functions
	mov [.aof],ebx
	mov ebx,[eax+32] ;get the addresses of names
	mov [.aon],ebx
	mov ebx,[eax+36] ;get the addresses of name ordinals
	mov [.aono],ebx

	xor ecx,ecx
	.loop:
	mov dword esi,[.fname]
	cmp dword ecx,[.non]
	jnl .break
	mov dword ebx,[.aon]
	add dword ebx,[.modb]
	mov eax,4
	mul ecx
	add ebx,eax
	mov dword ebx,[ebx]
	add ebx,[.modb]
	mov edi,ebx
	.chkstr:
	cmpsb
	jne .continue
	cmp byte [esi-1],0
	jne .chkstr
	cmp byte [edi-1],0 ;checking edi isn't necessary, but it's here for safety anyway
	jne .chkstr
	mov dword ebx,[.aono]
	add dword ebx,[.modb]
	mov eax,2
	mul ecx
	add ebx,eax
	mov word bx,[ebx]
	mov [.ordinal],bx
	mov ebx,[.aof]
	add dword ebx,[.modb]
	mov eax,4
	mul [.ordinal]
	add ebx,eax
	mov eax,[ebx]
	add eax,[.modb]
	pop edi
	pop esi
	pop ecx
	pop ebx
	mov esp,ebp
	pop ebp
	ret 8
	.continue:
	inc ecx
	jmp .loop
	.break:
	popa
	mov esp,ebp
	pop ebp
	ret 8

	.modb dd 0
	.ordinal dw 0
	.fname dd 0
	.ied dd 0
	.non dd 0
	.aon dd 0
	.aono dd 0
	.aof dd 0

There is a lot of code and I don't feel like explaining it all, but I can explain how to create your own GetProcAddress function (in not too much detail). WARNING: If you don't have a working knowledge of Windows headers, then you will not understand the following steps.

STEPS

Maneuver through the MZ/PE headers of the passed base address of the module to get the export data address.
Get the number of names, addresses of names tables, addresses of name ordinals table, and the addresses of functions table from the export data.
Make your own string comparer to compare the passed procedure string and each of the names in the addresses of names table (Remember: The goal is to not use import tables).
Once you've found the matching string, get the address of the name ordinal to get the function pointer in the addresses of functions table.
Clean up and return the function pointer.

NOTE: You will need to keep adding the base address of the module to any addresses/data you retrieve from the DLL module.

Now you can just call the code like so:

Code:

call GetKERNELBASE ;puts base address of KERNELBASE.DLL into eax

push <ProcString>
push <BaseModuleAddress>
call MyGetProcAddress ;puts address of process <ProcString> from <BaseModuleAddress> into eax

Here is a full example script:

Code:

format PE GUI
entry main

section '.text' code writable readable executable

k32:
	dd 0
	.LoadLibraryEx dd 0

u32:
	dd 0
	.MessageBox dd 0
	
Strings:
	.u32 db 'user32.dll',0
	.MessageBoxA db 'MessageBoxA',0
	.LoadLibraryExA db 'LoadLibraryExA',0
	.cap db 'Caption',0
	.msg db 'No IATs needed!',0
	
main:
	call GetKERNELBASE
	mov [k32],eax
	
	push Strings.LoadLibraryExA
	push dword [k32]
	call MyGetProcAddress
	cmp eax,0
	je .break
	mov [k32.LoadLibraryEx],eax
	
	push 0
	push 0
	push Strings.u32
	call [k32.LoadLibraryEx]
	mov [u32],eax
	
	push Strings.MessageBoxA
	push dword [u32]
	call MyGetProcAddress
	mov [u32.MessageBox],eax
	
	push 0
	push Strings.cap
	push Strings.msg
	push 0
	call [u32.MessageBox]
	.break: ;Couldn't find LoadLibraryExA
	ret
	

GetKERNELBASE:
	mov eax,[fs:0x30]
	mov eax,[eax+0x0c]
	mov eax,[eax+0x1c]
	mov eax,[eax]
	mov eax,[eax+0x08]
	ret

MyGetProcAddress:
	push ebp
	mov ebp,esp
	push ebx
	push ecx
	push esi
	push edi
	mov dword eax,[ebp+8]
	mov [.modb],eax ;Get module base address
	mov dword eax,[ebp+12] ;String to cmp
	mov [.fname],eax
	mov eax,[.modb]
	add eax,60
	mov eax,[eax] ;get e_lfanew
	add eax,[.modb] ;PE Header
	add eax,0x78 ;now points to export directory address
	mov eax,[eax] ;... and get that address
	add eax,[.modb]
	mov [.ied],eax
	mov ebx,[eax+24] ;get the number of names
	mov [.non],ebx
	mov ebx,[eax+28] ;get the addresses of functions
	mov [.aof],ebx
	mov ebx,[eax+32] ;get the addresses of names
	mov [.aon],ebx
	mov ebx,[eax+36] ;get the addresses of name ordinals
	mov [.aono],ebx

	xor ecx,ecx
	.loop:
	mov dword esi,[.fname]
	cmp dword ecx,[.non]
	jnl .break
	mov dword ebx,[.aon]
	add dword ebx,[.modb]
	mov eax,4
	mul ecx
	add ebx,eax
	mov dword ebx,[ebx]
	add ebx,[.modb]
	mov edi,ebx
	.chkstr:
	cmpsb
	jne .continue
	cmp byte [esi-1],0
	jne .chkstr
	cmp byte [edi-1],0 ;checking edi isn't necessary, but it's here for safety anyway
	jne .chkstr
	mov dword ebx,[.aono]
	add dword ebx,[.modb]
	mov eax,2
	mul ecx
	add ebx,eax
	mov word bx,[ebx]
	mov [.ordinal],bx
	mov ebx,[.aof]
	add dword ebx,[.modb]
	mov eax,4
	mul [.ordinal]
	add ebx,eax
	mov eax,[ebx]
	add eax,[.modb]
	pop edi
	pop esi
	pop ecx
	pop ebx
	mov esp,ebp
	pop ebp
	ret 8
	.continue:
	inc ecx
	jmp .loop
	.break:
	popa
	mov esp,ebp
	pop ebp
	ret 8

	.modb dd 0
	.ordinal dw 0
	.fname dd 0
	.ied dd 0
	.non dd 0
	.aon dd 0
	.aono dd 0
	.aof dd 0

Maybe your a C programmer, so here's some C code to do it (made by someone else based on my findings). However, some imports were used which can easily be replaced with lower-level C code -or- if your compiler supports in-line assembly, you can just use the above.

Get the KERNELBASE address.

Code:

void __declspec(naked) *GetKERNELBASE() {
    __asm {
        mov eax, fs:[0x30]
        mov eax, [eax+0x0c]
        mov eax, [eax+0x1c]
        mov eax, [eax]
        mov eax, [eax+0x08]
        ret
    }
}

Your GetProcAddress function.

Code:

void *MyGetProcAddress(HMODULE modl, char *fname) {
    unsigned long modb          = (unsigned long)modl;
    IMAGE_DOS_HEADER *dosh      = (IMAGE_DOS_HEADER *)modb;
    IMAGE_NT_HEADERS *nth       = (IMAGE_NT_HEADERS *)(modb+dosh->e_lfanew);
    IMAGE_EXPORT_DIRECTORY *ied = (IMAGE_EXPORT_DIRECTORY *)(modb+nth->OptionalHeader.DataDirectory->VirtualAddress);
    unsigned int i;
 
    for(i = 0; i < ied->NumberOfNames; i++) {
        const char *nn = (*(const char **)(ied->AddressOfNames+modb+i*sizeof(void *)))+modb;
 
        if(!strcmp(fname, nn)) { //You can replace strcmp with your own string compare
            unsigned short ordinal = *(unsigned short *)(ied->AddressOfNameOrdinals+modb+i*sizeof(unsigned short));
            return (void *)((unsigned long)*(void **)(ied->AddressOfFunctions+modb+ordinal*sizeof(void *))+modb);
        }
    }
 
    return NULL;
}

Get LoadLibraryEx's address

Code:

HMODULE (__stdcall *dyn_ll)(LPCTSTR lpFileName,HANDLE hFile,DWORD dwFlags);
dyn_ll = MyGetProcAddress(kern, "LoadLibraryExA");

Of course, you may want to load a lot of library functions. So you can do something like this:

Code:

char *func_kernel[] = {
    "AllocConsole", // 0
    "GetStdHandle", // 1
    "WriteConsoleA", // 2
};
unsigned long (__stdcall *k32[sizeof(func_kernel)/sizeof(*func_kernel)])();

char *func_user[] = {
    "MessageBoxA", // 0
    "GetWindowTextA", // 1
}
unsigned long (__stdcall *u32[sizeof(func_user)/sizeof(*func_user)])();

HMODULE (__stdcall *my_ll)(LPCTSTR lpFileName,HANDLE hFile,DWORD dwFlags);

void load_imports() {
    HMODULE kern,user,kern32;
    unsigned long i;
 
    kern   = GetKERNELBASE();
    my_ll = MyGetProcAddress(kern, "LoadLibraryExA");
    kern32 = my_ll("kernel32.dll");
    user   = my_ll("user32.dll");
 
    for(i = 0; i < sizeof(func_kernel)/sizeof(*func_kernel); i++)
        k32[i] = MyGetProcAddress(kern32, func_kernel[i]);
 
    for(i = 0; i < sizeof(func_user)/sizeof(*func_user); i++)
        u32[i] = MyGetProcAddress(user, func_user[i]);
}

int main(int argc, char *argv[]) {
    load_imports();
    u32[0](0, "No IATs created!", "Caption", 0);
    return EXIT_SUCCESS;
}

Have fun with it...

After all that you may be like:

Originally Posted by Idiot

Why is this useful omg theres not point arrow me to its not useful.

or maybe

Originally Posted by Intelligent

Good post, but how can this be used?

Well, some "anti-hacks" work off the import table. Therefore, without an import table for it to go off of, you can create undetected hacks. Furthermore, you can encrypt the strings to make your hack 100% free of "*.dll" strings.

Have fun with it...

TUTORIAL[FASM/C/Windows]Importing libraries without any IATs (good for hacks)

Post a Reply

Similar Threads

Tags for this Thread