Free Public Valorant color Aimbot

[Nero666]

Features
Color Aimbot
Shot correction (Magnet)


Technical
This cheat is Internal/External type of a cheat built on top of the Interception drivers which Riot failed to block. Your mouse input is intercepted and the movement coordinates are "adjusted" to help you out. If you do not understand the Internal/External term, it means the cheat is external written as internal and therefore you can inject it into any process. Please note I took roughly 3 hours to write the features and the cheat as a whole so it is very rough around the edges. This is proof of concept that others should take as inspiration.

Compile the source yourself from the valorant master file using visual studio 2019

Instructions
1. Install the Interception driver ( i will not link this since it's against rules but it can be easily found using google}
2. Download the cheat (two .dll files)
3. Find an original way to inject the "inject me" dll into any 32-bit process - !DO NOT INJECT THE DLL INTO VALORANT!. I will not provide a tutorial on this, look up internal/external, You can use any decent injector
4. The interception.dll file needs to be in the appropriate folder according to how you inject, if you do not know what this means, put the interception.dll into a folder (for example C:/Interception) and add this folder into system PATH variable (google that)
5. If you did this correctly, a console will show up with "YES" written in it
6. Input your sensitivity, smoothing, and mode into the console, details are below
7. The console should disappear and you should be good to go
8. In-game, set colorblind mode to Purple
9. To disable the cheat, end the process you injected into

Injection
Never inject into Valorant or RIOT associated processes.
Do not inject if the game is running.
find your own way of injecting the dll somewhere.
The safety of the cheat relies heavily on the way you inject the dll, This is also why there isn't a tutorial where I say, inject it into this... Use your own injector that you find somewhere and then inject it into 32 bit process of your choice.

Console input
Input the values in the following order:
Sensitivity
Smoothing
Mode

Example:
0.52
0.1
3

Smoothing has reasonable values around 0.01-0.2 based on your CPU and setup. The mode has 3 values (1, 2, 3). 1 is for Shot correction only, 2 is for Color Aimbot only, 3 is for both.

Cheat status
UNDETECTED, but:
If you use a detected injector, you will be banned, of course, don't inject when the game is already running.
Please note that the detection might rely heavily on the way people inject the dll and therefore might have mixed comments

Compile the file yourself from sources.


Very basic pixel bot source with the interception driver setup. Since Vanguard does not use any preventive measurements, you can just modify the source code if you know a little bit of C/C++ and run the cheat as if it was never released here (Add some junk, modify some parts of the code, or just use the Interception base as setup). In order to compile this, you need to update link to Interception.lib file in the project settings (in Linker). The solution is for Visual Studio with Visual C++ installed. If you have any comments about the source, quote me, but lot of it was written quickly so there aren't really interesting concepts in there.

[satriakrn]

Features
AimAssist
Shot correction (Magnet)


Technical
This cheat is Internal/External type of a cheat built on top of the Interception drivers which Riot failed to block. Your mouse input is intercepted and the movement coordinates are "adjusted" to help you out. If you do not understand the Internal/External term, it means the cheat is external written as internal and therefore you can inject it into any process. Please note I took roughly 3 hours to write the features and the cheat as a whole so it is very rough around the edges. This is proof of concept that others should take as inspiration.

Compile the source yourself from the valorant master file using visual studio 2019

Instructions
1. Install the Interception driver ( i will not link this since it's against rules but it can be easily found using google}
2. Download the cheat (two .dll files)
3. Find an original way to inject the "inject me" dll into any 32-bit process - !DO NOT INJECT THE DLL INTO VALORANT!. I will not provide a tutorial on this, look up internal/external, You can use any decent injector
4. The interception.dll file needs to be in the appropriate folder according to how you inject, if you do not know what this means, put the interception.dll into a folder (for example C:/Interception) and add this folder into system PATH variable (google that)
5. If you did this correctly, a console will show up with "YES" written in it
6. Input your sensitivity, smoothing, and mode into the console, details are below
7. The console should disappear and you should be good to go
8. In-game, set colorblind mode to Purple
9. To disable the cheat, end the process you injected into

Injection
Never inject into Valorant or RIOT associated processes.
Do not inject if the game is running.
find your own way of injecting the dll somewhere.
The safety of the cheat relies heavily on the way you inject the dll, This is also why there isn't a tutorial where I say, inject it into this... Use your own injector that you find somewhere and then inject it into 32 bit process of your choice.

Console input
Input the values in the following order:
Sensitivity
Smoothing
Mode

Example:
0.52
0.1
3

Smoothing has reasonable values around 0.01-0.2 based on your CPU and setup. The mode has 3 values (1, 2, 3). 1 is for Shot correction only, 2 is for AimAssist only, 3 is for both.

Cheat status
UNDETECTED, but:
If you use a detected injector, you will be banned, of course, don't inject when the game is already running.
Please note that the detection might rely heavily on the way people inject the dll and therefore might have mixed comments

Compile the file yourself from sources.


Very basic pixel bot source with the interception driver setup. Since Vanguard does not use any preventive measurements, you can just modify the source code if you know a little bit of C/C++ and run the cheat as if it was never released here (Add some junk, modify some parts of the code, or just use the Interception base as setup). In order to compile this, you need to update link to Interception.lib file in the project settings (in Linker). The solution is for Visual Studio with Visual C++ installed. If you have any comments about the source, quote me, but lot of it was written quickly so there aren't really interesting concepts in there

isnt aim bot? just correctiong our aim fire right???

[Nero666]

isnt aim bot? just correctiong our aim fire right???

It's a color aimbot, so it will follow whichever color is assigned to it but it also has shot correction if you use either mode 1 or 3 .The default color is purple but the color can also be changed by modifying the source.

[MrS1]

link not work why?

[Nero666]

link not work why?

the attachment seems to be working on my end ,not sure why its not working for you though

[Mango Coconut]

Yeah the link doesn't work, is there a way for to get in contact with eachother

[coloredgay]

It's a color aimbot, so it will follow whichever color is assigned to it but it also has shot correction if you use either mode 1 or 3 .The default color is purple but the color can also be changed by modifying the source.

how do i change the color to red or yellow?
ive been trying to edit the code:
if (green >= 190) {
return false;

to red but it isn't working. is this the wrong place to change the default color?

[[MPGH]Ahl]

Approved.

Post back results.

[ScarinfacT]

Hey there. I wanted to know if you've tested this in any kind of way.

[Nero666]

yes i have

try running both the injector and 32 bit app as admin.See if that works,i had the same issue before but doing that fixed it.Also your resolution must be 1920 x 1080 ,windowed or fullscreen doesnt matter but still try both.Notify me if this fixes it or not.

[coloredgay]

try running both the injector and 32 bit app as admin.See if that works,i had the same issue before but doing that fixed it.Also your resolution must be 1920 x 1080 ,windowed or fullscreen doesnt matter but still try both.Notify me if this fixes it or not.

it did not fix it, it still does nothing for me. i also just noticed that when i inject, i only can inject "Dll2.dll." however in the instructions you state i need to inject "inject me." i looked for that file name in the valorant-master folder, but it is no where to be found. is this the reason as to why it does not work?

[loufe2013]

bro but if I got ban is there any way to remove the ban from my pc?
my pc still new and I don't want to make it have ban permanently in valorant

- - - Updated - - -

bro but if I got ban is there any way to remove the ban from my pc?
my pc still new and I don't want to make it have ban permanently in valorant

[Tekenmeken]

bro but if I got ban is there any way to remove the ban from my pc?
my pc still new and I don't want to make it have ban permanently in valorant

- - - Updated - - -

bro but if I got ban is there any way to remove the ban from my pc?
my pc still new and I don't want to make it have ban permanently in valorant

Ehh no. You won't be able to avoid a permanent ban. If you're banned, then you're banned. Your IP/HWID will be flagged too after your first offense.

[artandrei]

WTF man give proper credits you literally copied the whole thread from the other site,

[petardascom]

yes you can avoid. just you can find how to change your hadware id and a good vpn like exitlag, but is recommended use this before ban and never risk your original ip or hwid.