Can you change the coords for moving the boots closer from the inventory?
I took screenshot by my self and its not working,
I believe its because screen location.
I am using 4 monitors
.Pixel pattern can be located on screen("39,40,41,1,1,71,62,42,0,-1,71,62,42,0,-2,68,64,53,0,-1,46,48,49,-1,0,39,40,41,-1,0,39,40,41,0,1,39,40,41,0,1,39,40,41,1,0,39,40,4 1,0,-1,39,40,41,1,1,51,48,41,-2,1,39,40,41,0,1,40,41,41,1,0,49,47,41", "50"
how do I write this line accordingly ?
Actually, those numbers are not coordinates, but RGB values. They're fine, and it seems to me you need to close off a bracket at the end. 4 monitors means you will most likely need to readjust this value here
Basically, just delete the numbers, click in the middle of the first set of ", and click on the magnifier glass. Then, enter Trove and press print screen. Now, back to BEM, go to the investigator window (it's the window that opened when you pressed on the magnifier), and you should be able to see a screenshot you took in game. Click on where you want to drop your boots (outside of the GUI), and it should work. If your location doesn't work, however, and your Trove is full screen, you can just type inCode:Mouse.Move to coordinate("779", "412")Code:"0", "0"
- - - Updated - - -
What seems to be the problem?
- - - Updated - - -
Try copy pasting the code again, there might have been some little letter or symbol that was misplaced. It's too large for me to see without the whole code.
This is /me friend:
このメモが表示された場合、その後、このノートが通知する価値がないことに、注意することがで きます。
MY PC SPECS :
Intel i3 3225
AMD Radeon 4870 Vapor-x 1 GB
550W Power Supply
8 GB DDR3 RAM
I've never used BEM before but when I install it, it says my trial has already expired
Is there anyway you can convert this to work in AHK? I know that AHK does has RGB Searching so it should work.
use ahk like this
Imagesearch, Foundx, FoundY, 0, 0, 1600, 900, *50 c:\boot1.bmp <- put your boot image here
if errorlevel = 0
{
MouseClickDrag, Left, %FoundX%, %FoundY%, 100, 100
}
die254 (07-20-2015)
Thanks for this.
Took your part and adapted for every screen and made some adjustments for my personal use, here is my code:
Code:#Persistent Numpad2:: Loop { Sleep, 3000 Imagesearch, Foundx, FoundY, 0, 0, A_ScreenWidth, A_ScreenHeight, *50 c:\boot.bmp if errorlevel = 0 { MouseClickDrag, Left, %FoundX%, %FoundY%, 779, 412 } }