OutdatedOsu! Multi Tool v0.3c

Posts 1–15 of 36 · Page 1 of 3

Osu! Multi Tool v0.3c

Osu! Multi Tool
Uploaded Version: v0.3c

This tool was NOT made by me! It was leeched from another site (can't tell which site since #Rules), but since this forum was so empty i decided to post it so there's atleast something here. I will provide virusscans, but i won't ensure you of your safety of getting banned or your account being stolen!

Small Description:
The .rar includes 2 files: a .txt with instructions provided by the owner of the tool and the tool itself as an .exe. Note that the information in the .txt file will also be posted here. The tool has 6 Options + 2 Toggles, which are Relax, Aim Correction, Aimbot, Relax + Aim Correction, Relax + Aimbot and Auto Spin only. The toggles are Auto Spin (if Auto Spin Only isn't selected) and Hardrock. The hack should work fine with Hidden and Flashlight-mods toggled. Double/Nightcore doesn't work with this version of the build!.

Step by step guide to using it:
1. Download the .rar file.
2. Unzip it into an empty folder.
Optional, Highly Recommended: use an Hashchanger to change the MD5 of the tool.
3. Fill in the information asked to you (Window Name and osu sensitivity).
4. Enter your song name and press "Update Song List".
5. Choose your song from the list and the difficulty you want to load it, check Hardrock if the mod is enabled at and press "Load"
For big beatmaps, it will take some time to load. Wait until the beatmap is loaded to 100% and ready for use.
6. Choose your mode and check autospinner if you want to and press Initialize
7. Load your Beatmap in Osu
8. ???
9. Profit.

Explanation on what the modes do:
Relax: Autoclicker. Basically a "triggerbot".
Aim Correction: If you are going to miss/are far away from the note, your cursor will be placed at the right spot. Buggy for sliders.
Aimbot: Automatically aims for you.
Relax + Aim Correction: Automatically clicks for you and fixes your cursor when you are aiming at the wrong spot.
Relax + Aimbot: Basically it will play the beatmap for you automatically.
Auto Spin Only: Will only do spinners for you, nothing else.

The Toggles:
Hardrock: Enable this if the Hardrock mod is enabled in Osu!.
Auto Spin: Will spin automatically, enable this when you have Relax + Aimbot enabled!

Virustotal (0/55)
Jotti (0/21)

- - - Updated - - -

Txt file:

README.txt

# Osu-Multi-Tool
///Instructions\\\

1
-(use any exe packer or other tool on the .exe, osu can detects its MD5 so i highly recomend doing this if you dont wanna get banned)
-(or mess the source code a bit yourself, this way its more undetectable)

2
-(change the window name to of a known program youre not running)
-(change the process name to the same of the program you used for the window)

3
-(use the search bar to search for a song)
-(select Hardrock mod before loading)
-(select its difficulty and load)
-(select tool, initialize and play it)

4
-(look at the options, theres a lot of options there, change then for undetectability and better performance)
-(go at the hotkeys options and change the hotkeys for the ones you want)

5
-(if you failed a song or exit it before finishing osu will continue playing it from the menu at the same part it stopped during play so the tools will continue to run, to stop it press the hotkey designed to "stop" or press the stop button, but if aimbot is on using the hotkey is better)

6
-(if you get a error when loading a song send the song and difficulty used with the error code in pm to me)
-(error 23 may happen sometimes, the song can still be played but slider breaking may happen)
-(if beat divisor of a song is 1 or 2 slider breaking is possible)

7
-(Use Osu! FPS at 120 or unlimited for better performance)

- - - Updated - - -

Changelog (Made by the Creator):
v0.3c
* Fixed Spin Hold Time

v0.3b
* Fixed Windowname
* Fixed keyboard taps

v0.3
* Added new coordinate system
* Added support for cuves: B, P and C
* Added support for PL sliders
* Added support for Hardrock
* More "smart" aim correction
* Added support for Red dots
* Added support for note stacking
* Removed all general options
* Removed Aim correction and aimbot option: Y correction
* Removed Aimbot option: slider timing correction
* Added Performance options: Scan precision and Slider lenght precision
* Several bugfixes

Image at the bottom of the post;
It's almost fully blacked, it's my main (but if you found me, you found me hard):

Tool in action!

Osu! Multi Tool v0.3c_mpgh.net.rar439 KB · 1,542 downloads 1/59 malicious

Download & Thanks

Approved .

Looks smexy, might check it out later.

If I play osu as Guest, do I have to do the step 1 and 2 for not get banned ?

Originally Posted by shizzyx

If I play osu as Guest, do I have to do the step 1 and 2 for not get banned ?

I recommend you do, since as far as i have understood you can get IP-banned. But i don't know for sure, since i have never been banned nor IP-Banned before.

I just recommend you to use an Hashchanger like once a day before you use the tool (and not every time you are using the tool), that way it's harder to detect. And if you don't know where to get one, i got mine from the CS:GO forum here.

not working

Originally Posted by Expect12

not working

Hmm, i did a bit of research for you. First, make sure you are running it right:
1. Start Osu!.
2. Start the tool.
3. Be patient. It took for me around 20 seconds maybe for something to promp up but it can take longer for you.
4. Fill in the information asked (Osu! Mouse speed and process title name)
5. For this build, i think the tool will close after it's first setup, so just open it again while Osu! is opened and it will work.

If it doesn't properly run:
1. Download AutoIt (It's only for compiling the source, the tool should work without it (since i don't own the tool and it still works))
2. Make sure things like Flash or Drivers for your computer are up-to-date.

Note that not every beatmap works. Some will give an error and the tool will close out. This is why the tool isn't even a full release (version 0.3). Other than that there will be bugs (of course) so feel free to report them here so i can redirect them to the owner. Besides that, i have found out Double/Nightcore does work, only it's buggy.

Using keyboard buttons would give a Error. "Error: Array variable has incorrect number of subscripts or subscript dimension range exceeded"

Originally Posted by GGenocide

Using keyboard buttons would give a Error. "Error: Array variable has incorrect number of subscripts or subscript dimension range exceeded"

A small error by the creator. Use capital letters instead of small letters, so instead of using "x", use "X" instead.
Changing it to capital letters made it work for me.

EDIT: Like so:

Ok works but this definetly needs HOTFIX! If you start a game and leave it, its incredible hard to stop it spinn arround with your mouse, and also u have to be able to press stop, which doesnt work for me.

Originally Posted by Expect12

Press the Home key on your keyboard. And if you don't have that key for whatever reason, rebind it in the options menu. It will unload the beatmap and uninitialize the tool. Then you can reselect your beatmap, load it and initialize it again.

Still not working. Gave the same error

Originally Posted by GGenocide

Still not working. Gave the same error

Can you use the code tags and paste your config.ini in it? Also have you tried other beatmaps? Some beatmaps do not work on their own, so the error might have to do with that beatmap not being compatible?

EDIT: With code tags i mean the {CODE}{/CODE} (but then "[" instead of "{", had to use {} because without it would give an preview)
Like so:

Code:

Your Config.ini here

Code:

[GENERAL]
windowname=new
screenresolution=1600x900
sensibility=1
FIRSTRUN=1
hotkey={END},{Home}
lookonline=1
[relax]
accmin=0
accmax=50
holdmin=40
holdmax=80
maxinterval=179
key=Z,X
usemouse=0
[aimcorrection]
correctionradius=100
[aim]
ycorrection=35
[aimbot]
movetime=1000
slideracc=20
sliderspdcorrection=1
[autospin]
spinlinemin=75
spinlinemax=150
spinvariation=10
spinsps=10
[Performance]
scanprecision=256
bezierprecision=0.001

Originally Posted by GGenocide

Code:

[GENERAL]
windowname=new
screenresolution=1600x900
sensibility=1
FIRSTRUN=1
hotkey={END},{Home}
lookonline=1
[relax]
accmin=0
accmax=50
holdmin=40
holdmax=80
maxinterval=179
key=Z,X
usemouse=0
[aimcorrection]
correctionradius=100
[aim]
ycorrection=35
[aimbot]
movetime=1000
slideracc=20
sliderspdcorrection=1
[autospin]
spinlinemin=75
spinlinemax=150
spinvariation=10
spinsps=10
[Performance]
scanprecision=256
bezierprecision=0.001

Hey GGenocide,
Relax + Aimbot is currently broken if you try to use it with keys. Using Relax combined with Aim Correct and using your keyboard keys in the settings work fine. (So as long as you don't use Relax + Aimbot (and maybe Aimbot alone too), you can disable the mouse in the options and use the keys specified)
Don't worry, this isn't only a problem on your side and the owner of the tool will be notified if he (or she) hasn't planned to fix this in his/her next release of the tool.