This thread will be something like a FAQ.
In here I will go through the most common problems that I have seen in the time I have been on MPGH.
In some situations I will also link you to a specific thread where a problem has been discussed so you can read it for yourself.
Problems with:
If you see this above when opening your client then here are some solutions:
1. When your client is opening right click and go to Global Settings.
There click onto the last tab and add your client to the trusted locations.
If that didn't help go to the next solution.
If you get an error like this and it says that normally there is only one connection allowed per socket you probably have already one instance of KRelay running. Also there could be that there is another program blocking the Ports of KRelay. For further explanation use this Thread: https://www.mpgh.net/forum/showthread.php?t=1106585
Informationen über das Aufrufen von JIT-Debuggen
anstelle dieses Dialogfelds finden Sie am Ende dieser Meldung.
************** Ausnahmetext **************
System.Net.Sockets.SocketException (0x80004005): Normalerweise darf jede Socketadresse (Protokoll, Netzwerkadresse oder Anschluss) nur jeweils einmal verwendet werden
bei System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
bei System.Net.Sockets.Socket.Bind(EndPoint localEP)
bei System.Net.Sockets.TcpListener.Start(Int32 backlog)
bei System.Net.Sockets.TcpListener.Start()
bei Lib_K_Relay.Proxy.Start()
bei K_Relay.FrmMainMetro.btnToggleProxy_Click(Object sender, EventArgs e)
bei K_Relay.FrmMainMetro.FrmMainMetro_Shown(Object sender, EventArgs e)
bei System.Windows.Forms.Form.OnShown(EventArgs e)
bei System.Windows.Forms.Form.CallShownEvent()
bei System.Windows.Forms.Control.InvokeMarshaledCallba ckDo(ThreadMethodEntry tme)
bei System.Windows.Forms.Control.InvokeMarshaledCallba ckHelper(Object obj)
bei System.Threading.ExecutionContext.RunInternal(Exec utionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
bei System.Threading.ExecutionContext.Run(ExecutionCon text executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
bei System.Threading.ExecutionContext.Run(ExecutionCon text executionContext, ContextCallback callback, Object state)
bei System.Windows.Forms.Control.InvokeMarshaledCallba ck(ThreadMethodEntry tme)
bei System.Windows.Forms.Control.InvokeMarshaledCallba cks()
************** JIT-Debuggen **************
Um das JIT-Debuggen (Just-In-Time) zu aktivieren, muss in der
Konfigurationsdatei der Anwendung oder des Computers
(machine.config) der jitDebugging-Wert im Abschnitt system.windows.forms festgelegt werden.
Die Anwendung muss mit aktiviertem Debuggen kompiliert werden.
Wenn das JIT-Debuggen aktiviert ist, werden alle nicht behandelten
Ausnahmen an den JIT-Debugger gesendet, der auf dem
Computer registriert ist, und nicht in diesem Dialogfeld behandelt.
You download the .zip or .rar from the Thread. After then unpack it somewhere.
Now you got a .dll and maybe a .txt. The .txt is only a readme file with some instructions or information.
OPen your KRelay folder, locate the Plugins folder inside there and open it. There are already some dlls.
Just put the one you downloaded also in there and you should be fine.
PS: If the plugin won't load right click it and tap unblock.
In this case you maybe just forgot to click onto the save button.
After that it should work fine!
Make sure the dlls are in the Plugins folder inside your KRelay folder.
Try to unblock them by right clicking them.
Then it should work fine!
Always check if you are on the newest version of KRelay!
Talking and posting about these copy right material is forbidden on MPGH so I can't help you there.
BUt still you maybe will find your answer in the other Solutions!
Always make sure you are connected to the proxy server on the client.
Additionally you can also try to restart the proxy server from KronkBoxer itself.
To make KronkBoxer work properly also be sure that there is no other instance of it running or any other RotMG Proxy as KRelay.
This has been discussed a lot, I am experiencing this myself often. Some say it is because you get hit with too many debuffs.
Some others say it's because of the internet connection or the cpu usage. But there has not been found a real solution to this problem and I am sure that Kronks is working on something to solve all of this ^^
If nothing above worked for you try the oldest fix of them all: RESTART YOUR PC!
If you do not find the solution for your problem feel free to open a Thread in the Help & Request section and it hopefully will be fixed for you. ^^
I do not guarantee that all these things are working, I just searched through some pages and looked up solutions.
Included also my own experience with some of the problems and hope that his helped you!
Also feel free to add solutions to something in the comments!
Keep this thread growing!
nee help finding a client plz
- - - Updated - - -
[QUOTE=The_En|D;11572606]This thread will be something like a FAQ.
In here I will go through the most common problems that I have seen in the time I have been on MPGH.
In some situations I will also link you to a specific thread where a problem has been discussed so you can read it for yourself.
Problems with:
If you see this above when opening your client then here are some solutions:
1. When your client is opening right click and go to Global Settings.
There click onto the last tab and add your client to the trusted locations.
If that didn't help go to the next solution.
If you get an error like this and it says that normally there is only one connection allowed per socket you probably have already one instance of KRelay running. Also there could be that there is another program blocking the Ports of KRelay. For further explanation use this Thread: https://www.mpgh.net/forum/showthread.php?t=1106585
Informationen über das Aufrufen von JIT-Debuggen
anstelle dieses Dialogfelds finden Sie am Ende dieser Meldung.
************** Ausnahmetext **************
System.Net.Sockets.SocketException (0x80004005): Normalerweise darf jede Socketadresse (Protokoll, Netzwerkadresse oder Anschluss) nur jeweils einmal verwendet werden
bei System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
bei System.Net.Sockets.Socket.Bind(EndPoint localEP)
bei System.Net.Sockets.TcpListener.Start(Int32 backlog)
bei System.Net.Sockets.TcpListener.Start()
bei Lib_K_Relay.Proxy.Start()
bei K_Relay.FrmMainMetro.btnToggleProxy_Click(Object sender, EventArgs e)
bei K_Relay.FrmMainMetro.FrmMainMetro_Shown(Object sender, EventArgs e)
bei System.Windows.Forms.Form.OnShown(EventArgs e)
bei System.Windows.Forms.Form.CallShownEvent()
bei System.Windows.Forms.Control.InvokeMarshaledCallba ckDo(ThreadMethodEntry tme)
bei System.Windows.Forms.Control.InvokeMarshaledCallba ckHelper(Object obj)
bei System.Threading.ExecutionContext.RunInternal(Exec utionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
bei System.Threading.ExecutionContext.Run(ExecutionCon text executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
bei System.Threading.ExecutionContext.Run(ExecutionCon text executionContext, ContextCallback callback, Object state)
bei System.Windows.Forms.Control.InvokeMarshaledCallba ck(ThreadMethodEntry tme)
bei System.Windows.Forms.Control.InvokeMarshaledCallba cks()
************** JIT-Debuggen **************
Um das JIT-Debuggen (Just-In-Time) zu aktivieren, muss in der
Konfigurationsdatei der Anwendung oder des Computers
(machine.config) der jitDebugging-Wert im Abschnitt system.windows.forms festgelegt werden.
Die Anwendung muss mit aktiviertem Debuggen kompiliert werden.
Wenn das JIT-Debuggen aktiviert ist, werden alle nicht behandelten
Ausnahmen an den JIT-Debugger gesendet, der auf dem
Computer registriert ist, und nicht in diesem Dialogfeld behandelt.
You download the .zip or .rar from the Thread. After then unpack it somewhere.
Now you got a .dll and maybe a .txt. The .txt is only a readme file with some instructions or information.
OPen your KRelay folder, locate the Plugins folder inside there and open it. There are already some dlls.
Just put the one you downloaded also in there and you should be fine.
PS: If the plugin won't load right click it and tap unblock.
In this case you maybe just forgot to click onto the save button.
After that it should work fine!
Make sure the dlls are in the Plugins folder inside your KRelay folder.
Try to unblock them by right clicking them.
Then it should work fine!
Always check if you are on the newest version of KRelay!
Talking and posting about these copy right material is forbidden on MPGH so I can't help you there.
BUt still you maybe will find your answer in the other Solutions!
Always make sure you are connected to the proxy server on the client.
Additionally you can also try to restart the proxy server from KronkBoxer itself.
To make KronkBoxer work properly also be sure that there is no other instance of it running or any other RotMG Proxy as KRelay.
This has been discussed a lot, I am experiencing this myself often. Some say it is because you get hit with too many debuffs.
Some others say it's because of the internet connection or the cpu usage. But there has not been found a real solution to this problem and I am sure that Kronks is working on something to solve all of this ^^
If nothing above worked for you try the oldest fix of them all: RESTART YOUR PC!
If you do not find the solution for your problem feel free to open a Thread in the Help & Request section and it hopefully will be fixed for you. ^^
I do not guarantee that all these things are working, I just searched through some pages and looked up solutions.
Included also my own experience with some of the problems and hope that his helped you!
Also feel free to add solutions to something in the comments!
Keep this thread growing![/client w No Clipping client]