Bloody V7 Mouse Macros - AK12 (Autofire+Burst Mode)
Bloody V7 Mouse Macros - AK12 (Autofire+Burst Mode)
Well, since Yellow and me made some Macros for BF3, i hope we can continue in BF4 
NEW USERS to Bloody Macros, read Yellows Macrotutorial:
http://www.mpgh.net/forum/174-battle...ech-mouse.html
IMPORTANT: my mousesensitivity is different than Yellows, so if you use my macros, you will have to set mousesens to 0.016500!
IMPORTANT Nr2: i play with inverted mousesettings, so if you don´t play with inverted settings, you will have to open the Macros in Bloody Editor and change the positive y-values to negative values (e.g. change "12" to "-12")!
Now to the macros for AK12 I have made one for Fullauto and one for Burst Fire. I highly recommend using the burstmacro, since the gun has higher RPM and is more accurate in Burstmode (don´t forget to enable burst mode in game) :P
Fullauto/Burstmacros (just laser gadget):
Virustotal-Check: https://www.virustotal.com/de/file/a...is/1383154019/
Jottiscan: http://virusscan.jotti.org/en/scanre...b527fde22beaae
*EDIT*
as soon as you get the heavy barrel for it, then just add 3pixels to all y-values in the macro to compensate its recoil. Quite a beast with these settings
HF!
NEW USERS to Bloody Macros, read Yellows Macrotutorial:
http://www.mpgh.net/forum/174-battle...ech-mouse.html
IMPORTANT: my mousesensitivity is different than Yellows, so if you use my macros, you will have to set mousesens to 0.016500!
IMPORTANT Nr2: i play with inverted mousesettings, so if you don´t play with inverted settings, you will have to open the Macros in Bloody Editor and change the positive y-values to negative values (e.g. change "12" to "-12")!
Now to the macros for AK12
I have made one for Fullauto and one for Burst Fire. I highly recommend using the burstmacro, since the gun has higher RPM and is more accurate in Burstmode (don´t forget to enable burst mode in game) :PFullauto/Burstmacros (just laser gadget):
Virustotal-Check: https://www.virustotal.com/de/file/a...is/1383154019/
Jottiscan: http://virusscan.jotti.org/en/scanre...b527fde22beaae
*EDIT*
as soon as you get the heavy barrel for it, then just add 3pixels to all y-values in the macro to compensate its recoil. Quite a beast with these settings
HF!
Nice work.
2 virus scans.
Originally Posted by Brian Moser
2 virus scans.
/chars
Nice work.
/File Approved.
Not tested post back results.
Not tested post back results.
I checked Yellow's thread and found that he used Bloody3 software, do I need Bloody3 to use your Macros?It looks like it's not a free software
Originally Posted by OwenLJN
I checked Yellow's thread and found that he used Bloody3 software, do I need Bloody3 to use your Macros?It looks like it's not a free software
You can download it for free at Bloody.tw and use the Core3 function unlimited times (if you have an activated mouse)
If your mouse is not activated the activation is $20 (I recommend you buy the pre-activated ones)
Originally Posted by Yellow 13
Bloody3 is because I created that image before Bloody4 is released, it works the same
You can download it for free at Bloody.tw and use the Core3 function unlimited times (if you have an activated mouse)
If your mouse is not activated the activation is $20 (I recommend you buy the pre-activated ones)
You can download it for free at Bloody.tw and use the Core3 function unlimited times (if you have an activated mouse)
If your mouse is not activated the activation is $20 (I recommend you buy the pre-activated ones)
There is a discussion on MPGH too, heres a direct post: http://www.mpgh.net/forum/57-general...ml#post8744976
But i didn´t do all the steps described. As mentioned, all i did was: open the cryptor, change the first two lines with random numbers (keep the amount of numbers: four in line 1, five in line 2), enter my mouse ID on line 3 and use the generated license.bld to activate bloody 3. Then update to bloody 4. Works like a charm.
Originally Posted by waynomat
Well, in my case the BloodyLicenseCryptor worked perfectly (i activated Bloody 3 with it and flawlessly updated to bloody 4). Just use google for it.
There is a discussion on MPGH too, heres a direct post: http://www.mpgh.net/forum/57-general...ml#post8744976
But i didn´t do all the steps described. As mentioned, all i did was: open the cryptor, change the first two lines with random numbers (keep the amount of numbers: four in line 1, five in line 2), enter my mouse ID on line 3 and use the generated license.bld to activate bloody 3. Then update to bloody 4. Works like a charm.
There is a discussion on MPGH too, heres a direct post: http://www.mpgh.net/forum/57-general...ml#post8744976
But i didn´t do all the steps described. As mentioned, all i did was: open the cryptor, change the first two lines with random numbers (keep the amount of numbers: four in line 1, five in line 2), enter my mouse ID on line 3 and use the generated license.bld to activate bloody 3. Then update to bloody 4. Works like a charm.
If so can you write in more details (steps) about what you did? O:
Thanks in advance
Originally Posted by OwenLJN
I checked Yellow's thread and found that he used Bloody3 software, do I need Bloody3 to use your Macros?It looks like it's not a free software
If you just get the software it probably won't recognize your mouse.
"A4tech Bloody"<The mouse they primarily code for.
Originally Posted by Brian Moser
I think you have to get the mouse,the software is included.
If you just get the software it probably won't recognize your mouse.
"A4tech Bloody"<The mouse they primarily code for.
If you just get the software it probably won't recognize your mouse.
"A4tech Bloody"<The mouse they primarily code for.
Thanks for your macro! On this basis I made my macro appropriate to me!
Could you write a macro for a mouse x7 (or just add spot function to this macro?) with spot function? I used such macro in battlefield 3 for an-94
<Root>
<DefaultMacro>
<Major></Major>
<Description>1
</Description>
<Comment>1
</Comment>
<GUIOption>
<RepeatType>1</RepeatType>
</GUIOption>
<KeyUp>
<Syntax></Syntax>
</KeyUp>
<KeyDown>
<Syntax>//--------
LeftDown 1
KeyDown 20 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 8
KeyUp 20 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
KeyDown 20 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 1
KeyUp 20 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 0
</Syntax>
</KeyDown>
<Software>battlefield 3
</Software></DefaultMacro>
</Root>
Could you write a macro for a mouse x7 (or just add spot function to this macro?) with spot function? I used such macro in battlefield 3 for an-94
Macro an-94 bf3
<Root>
<DefaultMacro>
<Major></Major>
<Description>1
</Description>
<Comment>1
</Comment>
<GUIOption>
<RepeatType>1</RepeatType>
</GUIOption>
<KeyUp>
<Syntax></Syntax>
</KeyUp>
<KeyDown>
<Syntax>//--------
LeftDown 1
KeyDown 20 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 8
KeyUp 20 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 8
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 1
LeftDown 1
KeyDown 20 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR -1 1
KeyUp 20 1
LeftDown 1
Delay 50 ms
LeftUp 1
Delay 50 ms
MoveR 0 0
</Syntax>
</KeyDown>
<Software>battlefield 3
</Software></DefaultMacro>
</Root>
Waynomat,
Few questions.
-Am I reading it right that the burst mode is only using the laser light attachment?
-What are the attachment for the full auto?
- Lastly, I take it do the mouse fix, FOV, etc, that is posted in the guide from Yellow's post, just change the mouse sensitivity to what you have it set to?
thanks for the great work!
Few questions.
-Am I reading it right that the burst mode is only using the laser light attachment?
-What are the attachment for the full auto?
- Lastly, I take it do the mouse fix, FOV, etc, that is posted in the guide from Yellow's post, just change the mouse sensitivity to what you have it set to?
thanks for the great work!
can i use this im using bloody v7 bloody2
This thread is closed for replies.
