Nothing happened because you have the wrong syntax for g. If you want to start at 100 and execute to 103, its "g=100 103". "g 100 (103)" is just saying execute till 100, so nothing at all gets run.
Here, take a look at this.
Started to fool around with debug on windows 7 32bit, wanted to make simple commands to add a value to a register then subtract the value by half. By using the g command it appears nothing happened?
Nothing happened because you have the wrong syntax for g. If you want to start at 100 and execute to 103, its "g=100 103". "g 100 (103)" is just saying execute till 100, so nothing at all gets run.
Here, take a look at this.
Recent releases:
CSPHv3.2
Can't see me calling, you hatin'?Code:00F38C0E B8 0610F300 MOV EAX, 00F31006 00F38C13 C700 208CF300 MOV DWORD PTR DS:[EAX], 00F38C20 00F38C19 EB FF JMP SHORT 00F38C1A 00F38C1B 90 NOP 00F38C1C 0000 ADD BYTE PTR DS:[EAX],AL 00F38C1E 0000 ADD BYTE PTR DS:[EAX],AL 00F38C20 58 POP EAX 00F38C21 ^EB EB JMP SHORT 00F38C0E
Thanks differently will study up and see what thing I could be able to do!
Last edited by Elyne1331; 11-11-2014 at 10:45 AM.