Originally Posted by
lineMW3
\/ READ THIS \/ | NOCLIP CHEAT!
First thing to do find a spot IN rust where you can jump up and down. AKA a box etc
1. Open up cheat engine
2. click the blue computer and click whatever one is your game
3. Set value type Float
4. set scan type Unknown Initial Value
5. stand on the ground infront of whatever you are using to jump on a box table etc
6. hit FIRST scan, go to Edit then Setting in Cheat Engine, Create Hotkey for Next Scan Decreased Value And Next Scan increased Value
7. Once its done scanning jump up on your box table etc
8. Hit Increase value Hot key while ontop of the box
9. Hit decrese value Hot key while on the ground
10.Repeat this process about 10x
11. then Change scan type to valuebetween
and do 2-5 after that find a bunch of 3's on the left side,
12. double click them 1 at a time and activiate them by clicking the check box
13. After That jump in game (it should prevent you from jumping (shake screen) if you found the right one if u do jump try the next one
14. Repeat until u find the one that doesnt let u jump.
15. Right click the address and go to Change/Set Hotkeys
16. Create an Increased Inital Value Hotkey and set the Value at 0.009
17. Create an Decreased Inital Value Hotkey and Set the Value at 0.009
18. Open up Windows Calculator and press Alt+3 Then Select Hex on the left
19. type your value address which u have active at the bottom
20. Now with the address minus it by 8 and write down the number u get
21. Go to Add Adress Manually on Cheat Engine and Put the Number u just got and change the type to Float
22. Repeat Step 20 expect u Add 8 to the Oringial Address
23. Repeat Step 21 And Step 16 and Step 17 For Both the New Address u got
Enjoy