7's Fishing Bot (with auto-drop of boots)

[konradmm]

2 things regarding this update:
- Sorry for the (forgot to switch that debug off ;p)
- You NEED TO delete old *.ini files, to get new functions to work.


First of all, i would like to thank Zog for the fishing script idea and Xaymar for tooltip idea (this bot is made 100% by me, but ty though)
Second of all, i started with using taejin's Pointers (i have no idea how to find it)

Features:

• Fishing in Water/Lava/Chocolate
• Auto-Drop of Boots version included
• Notify pop-up when ur inventory is full (good if ure not using auto-drop of boots)
• (new) Bot configuration: change-able hotkey, different config for each bot
• Bot statistics
• Available to change pointers without need to update bot.

Instructions/Installation:

1. Download archive from attachment
2. Unpack archive somewhere on ur HDD
3. Launch 'My_32bit.exe' (advanced users may run 64bit version) - if u experiance problems, run 32bit one.
3 1. If its first run, configure ur bot using the gui and press "Save and Start"
4. Go to your Trove window, stand up near water, open inventory.
5. And press ur Hotkey to start (default: NumPad7)

Instruction on updating pointer:

1. Upon first launch of the bot, file 7FishBot.ini will be created.
2. This file contains pointer+offsets of water/lava/choco address.
3. Usually its enough to change just first value (the one before first '+' sign)

Example:

[Pointers]
WaterPointer="0x00964DDC+0x144+0xe4+0x70"
LavaPointer="0x00964DDC+0x144+0xe4+0x514"
ChocoPointer="0x00964DDC+0x144+0xe4+0x2c0"

 

HotkeyToStart - Any hotkey u want to use to start the bot (list below)
HotkeyToStop - Any hotkey u want to use to stop the bot
Auto-Drop Boots - Switch On/Off Dropping boots (trove window needs to be active)
Auto-Drop Type - Choose between dropping Boots every second/every fished item
Full Inv Notify - Switch On/Off Notify when Inventory is full or Out of lures
Statistics - Switch On/Off showing tooltip with statistics

 

Keycodes:
CapsLock
Space
Tab
Enter
Escape
Backspace
ScrollLock
Delete
Insert
Home
End
PgUp
PgDn
Numpad0
NumpadIns
Numpad1
NumpadEnd
Numpad2
NumpadDown
Numpad3
NumpadPgDn
Numpad4
NumpadLeft
Numpad5
NumpadClear
Numpad6
NumpadRight
Numpad7
NumpadHome
Numpad8
NumpadUp
Numpad9
NumpadPgUp
NumpadDot
NumpadDel
NumpadDiv
NumpadMult
NumpadAdd
NumpadSub
NumpadEnter
F1 - F12

Frequently Asked Questions:
Q: Dropping boots doesnt work for me!
A: Be sure to check some things. You need to have graphic settings to HIGH (next version will add ability to change it), DO NOT change size of the window after bot will resize it. Dont forget also to have Trove Window activated (not minimalized, nor in background)

Q: Nothing happens when i press HotKey after launching bot
A: Did u configured HotKey correctly? Spell-check the hotkey if it is in my List of hotkeys. Bot was made and tested on win7 64bit and there it should work. For other systems, please post in the topic

Q: Dropping boots works, but FishBot doesn't cast fish?
A: I have no idea what's doin it but you can try Uninstalling Auto-Hotkey. Some users said that was helpful for them.


Possible Fixes:

• Bot doesnt even press the 'F' key. Make sure you got English Keyboard setting (in windows)
• Sometimes bot goes to inactive and timer starts to go up really fast. Are you using TeamViewer, or many monitors? Bot was untested in these cases, so try using 1 screen / switch off TeamViewer

Notes:

• If you use version WITH auto-drop of boots, you must have WINDOWED setting. DO NOT change ur resolution after launch of bot
• Auto-Drop of boots works only when Trove window is in Foreground (cant be minimalized, nor behind other windows)
• Press ur desired hotkey (default: NumPad9) to Force-Close the bot (must press when Trove is active)
• To run bot multiple times, just copy-paste the version u want to use, and launch it second time (DO NOT launch all bots at once, without activating them with ur StartButton first)

Some words from author:
I do not, i repeat, i do not (!) provide source of the fishing bot.
If you dont like it, dont use it.
There are plenty of other bots with similar functions as mine, so if u dont like it ...

Known Bugs:

• (fix'd) When u close the window of Trove, without closing the bot first (with NumPad9) you will have to close it via tray icon
• (moderate) Bot can glitch when on 2 or more Trove windows, in the same exact moment - Boot will drop.
• (moderate) Bot is bugged when u want to auto-drop boots with more then 1 client (still searching the problem)

To do:

• Pop in some ideas!

 

Trove Window:


Boots AutoDrop (sometimes glitchy but should mostly work):


Settings Window (later gonna make it look nicer, functionality first ;p)

 

04.08.2015

• Added configurables like when to throw boots (every fished item / every second), Showing tooltip with stats..
• Made bot reading pointers from file, so it wont be needed to update bot every trove update.
• Some cosmetics and re-done configurator (added logo too )

01.08.2015

• Bot will now drop boot every fished item.
• Did something that will help me release Forever Up2Data Bot.
• Not much changed, but these changes will help me release bot that will not require updating ;p

29.07.2015

• Fixd Trove window finding (my bad, im stupid and was tired yesterday)
• Bot will now close when u close Trove window

28.07.2015

• 1 exe file to launch 1 bot
• Settings screen + file (each for each bot)
• Simple fixes to boot-rotation bugs
• Fixed showing errors when it was all fine ;p
• For now, checking for boots, will be every second, instead of every item fished.

26.07.2015:

• Fixed major bug with multiclient and autodrop of boots
• Some improvements to speed-up boot searching process
• Added RandSleep functions, just more for protection if there's any bot-scanner in trove
• Added 32/64bit versions + some tooltip cosmetics

Virus Scans:

Jotti Scan finished. 0/21 scanners reported malware.
VirusTotal Detection ratio: 1 / 54

 

01.08.2015
Jotti Scan finished. 0/21 scanners reported malware.
VirusTotal Detection ratio: 1 / 55

29.07.2015
Jotti Scan finished. 0/21 scanners reported malware.
VirusTotal Detection ratio: 2 / 55

28.07.2015
Jotti Scan finished. 0/21 scanners reported malware.
VirusTotal Detection ratio: 2 / 55

26.07.2015
Jotti Scan finished. 0/21 scanners reported malware.
VirusTotal Detection ratio: 2 / 55

25.07.2015
VirusTotal Detection ratio: 2 / 55 (have no idea why there is 2, but as i said already, if u dont trust, just dont use it)
Jotti Scan finished. 0/21 scanners reported malware.

[Yemiez]

// Approved

[qztr]

// Approved

Finally something getting approved within 10 hours

[Yemiez]

Finally something getting approved within 10 hours

We have lifes to you know, we do this on our free time, multiple of the minions here have familys and or work to take care of, please consider that before making such comments.

[AdmiralShadow]

If made another copy of the .exe lets say My_64bit - Copy.exe <- Will this .exe be combined too with the 7FishBot.ini?

i.imgur(dot)com/QEXtAnz.png

[Yemiez]

If made another copy of the .exe lets say My_64bit - Copy.exe <- Will this .exe be combined too with the 7FishBot.ini?

i.imgur(dot)com/QEXtAnz.png

If its in the same directory and 7FishBot.ini is a static name to load settings from, yes. The other .ini seems to be based off of the name of the .exe (Dont quote me on that, it may be a static string to)

[konradmm]

If made another copy of the .exe lets say My_64bit - Copy.exe <- Will this .exe be combined too with the 7FishBot.ini?

i.imgur(dot)com/QEXtAnz.png

yes, 7FishBot.ini is shared by any exe files inside the same directory

[Romochild]

Does this come with my suggestion of running the bots on Low graphics to help us who bot 8+ accounts at a time?

[qztr]

Does this come with my suggestion of running the bots on Low graphics to help us who bot 8+ accounts at a time?

I've been running on Low settings without any issues with earlier versions.

[Romochild]

I've been running on Low settings without any issues with earlier versions.

Oh okay. I'll try it out. I just saw that I should run it with High so I thought that it'll only work on High :P

[qztr]

Oh okay. I'll try it out. I just saw that I should run it with High so I thought that it'll only work on High :P

AFAIK, the inventory graphics are still the same quality. It's just the animations and the worlds that looks different.

[konradmm]

Oh okay. I'll try it out. I just saw that I should run it with High so I thought that it'll only work on High :P

it was TESTED on high ;p
Thats why i posted if u have any problems , change to high.
Nope, im at parents' house now so i sort of forced that update.
But when i go back home (or gonna live with them for a longer time so like tomorrow) will update with some more settings, mby images for custom resolution, with no need of window resize.

[qztr]

300x230 is the lowest possible window size.
Would be great if it were possible to have auto drop boot on such a low res.

[Romochild]

300x230 is the lowest possible window size.
Would be great if it were possible to have auto drop boot on such a low res.

I second this. Would allow for more bots on one monitor xD

[AdmiralShadow]

I second this. Would allow for more bots on one monitor xD

I got 3 bots running with a very small window and my main account and big window and it works just fine, There's just no way to drop boots on all of them at the same time, I'll just check them every 30mins and drop the boots which usually takes 10 seconds to do.