MPGHThe Dark Arts
RegisterLog in

PostEzRealm v0.95

Posts 1–10 of 10 · Page 1 of 1
EzRealm v0.95
Ezrealm [0.95] Base Edition





EzOverlay is not required to use, it's just an option that allows you to control settings while ingame and see what's on and off.

Release: EzRealm [0.95] Base Edition
Requirements: .NET 4.5.2

Usage:

I like to use the EzOverlay, bothers me none it blocks a little bit of the game at the top, but its opacity is like 89% not 100% anyhow, so you can see through it a bit.

[Default hotkeys for HP/MP must be used, F,V for the time being, will allow this to be custom later]

Run the Game, Get into lobby, Run EzRealm, Enable Hotkeys if wanted, Press on EzOverlay[Optional], MAKE SURE you enable the option before attempting to adjust its slider, else the change may not take but should.

Additional Information:
I quickly finished up this initial release last night, let me know what you think. Please leave a like if you enjoy the tool and it helps you! This lets me know I'm doing something in the right directions.

For how bad Hixels Kit provided a net, I'm surprised it was viewed & downloaded so much tbh.

Do remember this program is unfinished and set to change!




For those that need to manually set height, due to monitor not being 1080p/2160p enter game take a screenshot use a program to find the pixel location of the top of your HP like the very top and set it to that number, you may still have issues, I will alter on release a version for more sizes but seeing as 1080p/2160p is getting to be the most common that's what I went with.

Note: If you are on 4k or anything other than 1080p, the auto mana pot may not work correctly or seemingly at all as I wasn't thinking about it when I coded the rest of the application quickly last night, please let me know if this is the case. Either way I'll be double checking and fixing it.

Also, ShowKeyRef/ShowColorAt are for testing do not turn them on and try to use the program like normal, You will open hundreds of MessageBoxes if you use the tool incorrectly with these two features.

Thank you for downloading once again and do enjoy!

EzRealm[0.95]_mpgh.net.zip808 KB · 873 downloads Clean
Download & Thanks
#1 · edited ·
Anti-Confuse <--- ahh was peeking at post and if the code from the old AHK is still accurate, I can get an Anti-Confuse toggle added to the program, sorry I don't really play much RotMG, initial Hixel's Kit post was for my buddy. This one was because I felt bad so many people used the other POS program, so here's a better one, that should get you killed much less.

Once again I will state, this does not make you a god, its a tool, you can and still will die, one hit shots cannot be prevented [In most cases]. Do not go lvl.1 trying to BS your way up and expect not to die, don't BS and you'll be 95% ok.

This program does not share code with Hixel's Kit, I did this on purpose as HK was such dirt, I didn't want to use it as a reference, so I didn't.

Edit: Like any smart cookie, I used AI to help me this time as well.
#2 · edited ·
help
It doesn't work for me. My resolution is in 2k, but every time I try to set something in the program it doesn't work. The program gives me an error and I don't know why, so maybe you have the answer for my problem.

Error: "Unhandled exception has occurred in your application [...] Input String was not in correct format"
#3 ·
Quote Originally Posted by LeCancer View Post
It doesn't work for me. My resolution is in 2k, but every time I try to set something in the program it doesn't work. The program gives me an error and I don't know why, so maybe you have the answer for my problem.

Error: "Unhandled exception has occurred in your application [...] Input String was not in correct format"
I’ve had a lot going on :P, on mobile at the moment will be on later today, give me a few days to get things in order, this program is pretty much only 1080p/2160p at the moment and the 2160p has errors, a quick fix is to set your resolution to 1080p temporarily. This has to to with me pushing out about half of that code in less than 30 minutes. If you want to make life way easy on me take a screenshot in game that shows your health/etc on the right. Block your name out/etc of course. Appreciate it, it is almost certainly my fault. Apologies. Thanks for responding! Make sure the game is full screen.
#4 · edited ·
Quote Originally Posted by LeCancer View Post
The screenshot is over saturated, but I hope it does the job. I'm not able to attach the files in the thread section because of the dimension of the screenshot, but I will drop a link to a ******* with the screenshot.


https://www.*******.com/s/9edr6gog9s...03119.png?dl=0
Use imgur and then use the add image from url button to post your image.
#6 ·
He
This works amazingly well! Only thing missing is the values of each tickbox would be helpful in deciding which to set it to (i tested, i think autonexus lowest tick is 30% hp and auto hp is 40% hp), and as you said yourself, custom keys would be very nice since I use Control for nexus and c for hp pots
#8 ·
Cant get it to work, using 1080 ingame. Get an error every time i move the slide. Is it outdated?
#9 ·
New version of EzRealm awaiting post approval.
New version solves many efficiency issues and etc.
The EzOverlay is not yet complete.
Revamped, Rewritten and much better (I think lol its been awhile)
Alpha anti-confuse system (Think I'm going to redo it differently from the arrow keys)
Redone UI
More Resolution Support ((again pretty sure been awhile) should support most all 16:9 screens now if I'm not mistaken)
Anyhow it's on its way, nothing special, still completely external.

Many Features are still planned to be built back in and to add new ones as well.

I am unsure if this revision shares any of the old code...maybe some.
1000+ Lines of code.

Edit: Realized something, I should be able to create an auto-aim system that utilizes the area around the player, I have an idea on how to make it detect entities although external. Will work on it soon.

Just a utility not really a hack but hey it works. [Source Code] to be posted at some point as well once I code a bit more.

Glad to be back!
#10 · edited ·
Posts 1–10 of 10 · Page 1 of 1

Post a Reply

Tags for this Thread

None

Need help?