[Tutorial]How to spread with Apex DC++
[Tutorial]How to spread with Apex DC++
In this tutorial you will learn how to spread your viruses, bots, servers, etc. in a really effficiant way
Part I Introduction and Explanation
ApexDC++ is a type of torrent like spreading methods its a person 2 person or peer to peer (p2p). So whatever you have on your pc they can download it from you then have it for themselves. If its done correctly you can get a lot of victims i maxed out on 25 a night because i don't mass spread through it.
FAQ
Will my ip get reported for trying this?: No it wont p2p is legal but it depends on what your giving out!
Is it possible i can get banned?: Yes but most poeple are stupid and don't care.
Do i have to do a lot of work for this?: Nope lay your but down and have fun while the idiots download your server.
Part II Time to begin the Spread!
Here is what you need!
ApexDC++
File Renamer
First off download and install Apex DC++ and while your at it we need to make a good 8000 or more copies or your bot/rat. What we will use for that is a file re namer this will make tons of copies for your server it also renames them, it give the name legitimate software like Norton or Kaspersky.
- Here is how to use the file renamer.
1. Run the file renamer
2. Go to "Menu" find "Start Grab"
3. Click "Start Grab"
- Now go to your server and put it in a folder any folder that you make put it in there and call it "Apex DC++" So you don't make a mistake delete it. Now it is time to make the 12k copies
Note: If you decide to pump your server do it before you copy and pmp it to about 1 or 2 ********s that good enough to get in most hubs.
- Go to "Menu" and go to start copy (this may lagg a slow system) now a open file will come up and now you just do to the file you put your server in.
- Find your server and let it make the copies of it. Depending on how fast your PC is that will be the time it will take.
- When it done you should have 10k or more copies in the folder it should look like this.
- Now you ready for ApexDC++
Part III Setting up the ApexDC++ and Spreading
- Ok open Apex and now you will see this before you start spreading you need to get apex to the directory where you thousand copied server is, heres how.
It will then create a file index this can take a second too. You are now done, last but not least you must now select hubs be sure to select a decent amount of hubs in every country so you wont have to worry about getting infects from just Germany or UK so find random ones, choose a lot of hubs too. Now start connecting connect to about 40 or 100 hubs and let them download your server leav it over night i assure you will be surprised.
VirusScans for FileRenamer:
FileReNamerv2.rar - Jotti's malware scan
FileReNamerv2.rar MD5:03b890ee3fe6ff73d348b2ce5ecfb52f - VirSCAN.org Scanners did not find malware!
Part I Introduction and Explanation
ApexDC++ is a type of torrent like spreading methods its a person 2 person or peer to peer (p2p). So whatever you have on your pc they can download it from you then have it for themselves. If its done correctly you can get a lot of victims i maxed out on 25 a night because i don't mass spread through it.
FAQ
Will my ip get reported for trying this?: No it wont p2p is legal but it depends on what your giving out!
Is it possible i can get banned?: Yes but most poeple are stupid and don't care.
Do i have to do a lot of work for this?: Nope lay your but down and have fun while the idiots download your server.
Part II Time to begin the Spread!
Here is what you need!
ApexDC++
File Renamer
First off download and install Apex DC++ and while your at it we need to make a good 8000 or more copies or your bot/rat. What we will use for that is a file re namer this will make tons of copies for your server it also renames them, it give the name legitimate software like Norton or Kaspersky.
- Here is how to use the file renamer.
1. Run the file renamer
2. Go to "Menu" find "Start Grab"
3. Click "Start Grab"
- Now go to your server and put it in a folder any folder that you make put it in there and call it "Apex DC++" So you don't make a mistake delete it. Now it is time to make the 12k copies
Note: If you decide to pump your server do it before you copy and pmp it to about 1 or 2 ********s that good enough to get in most hubs.
- Go to "Menu" and go to start copy (this may lagg a slow system) now a open file will come up and now you just do to the file you put your server in.
- Find your server and let it make the copies of it. Depending on how fast your PC is that will be the time it will take.
- When it done you should have 10k or more copies in the folder it should look like this.
- Now you ready for ApexDC++
Part III Setting up the ApexDC++ and Spreading
- Ok open Apex and now you will see this before you start spreading you need to get apex to the directory where you thousand copied server is, heres how.
- 1. Go to "file"
- 2. Click "Settings"
- 3. Go to "Sharing"
- 4. Go to the directory of the thousand servers are.
- 5. Open it and your good to go.
It will then create a file index this can take a second too. You are now done, last but not least you must now select hubs be sure to select a decent amount of hubs in every country so you wont have to worry about getting infects from just Germany or UK so find random ones, choose a lot of hubs too. Now start connecting connect to about 40 or 100 hubs and let them download your server leav it over night i assure you will be surprised.
VirusScans for FileRenamer:
FileReNamerv2.rar - Jotti's malware scan
FileReNamerv2.rar MD5:03b890ee3fe6ff73d348b2ce5ecfb52f - VirSCAN.org Scanners did not find malware!
You use RATs?
or just Bots?
or just Bots?
I prefer RATs, more functions... you can even make ur slaves DDoS some page with iframe
interesting I'll try it out
yah, it really does the work, just connect to like 95 hubs
If someone could give me a list with many file names, that would be great since my version doesn't grab names i must add manually
I'm getting errors with filerenamer. I get a comdlg32.ocx error in W7 64bit and a MSCOMCTL.ocx error in W7 32bit. Any idea's?
download the files put them in you Windows\SysWOW64\(Filename)
then register them with an elevated command prompt. Just google it and you will find out how it is really easy.
then register them with an elevated command prompt. Just google it and you will find out how it is really easy.
Originally Posted by 258456
download the files put them in you Windows\SysWOW64\(Filename)
then register them with an elevated command prompt. Just google it and you will find out how it is really easy.
then register them with an elevated command prompt. Just google it and you will find out how it is really easy.
Mine says "Grab Initializing..." at 0% and stays at that and doesn't do anything else.
renamer doesnt work for me :(
It doesnt grab any sites for me what do i do?
i see alot of guys r complaining that it wont work for me r just stuck on grab initialzed so want to tel that u should get high speed connection & it should work fine with offshore vps services not on home connectoin or if it work on home connection it should take mayb an houre or more no idea guess so .....but work perfect on vps .....Thanks for sharing nice tutorial i ll gone try it out 
Mine says it grabbed 900/900 pages, but it also says 0% and that there are no names. any help?
My File Re-Namer is also telling "Grab Initializing" and gets stuck at 0%!
Hm, it tells me its finished with Grabbing but doenst show any names :s Can someone give me his .txt so i can import it ?