[Tutorial] How to use a cheat table(CT)

Credits :: Dark Byte(Cheat Engine), iSecks(He was going to make one, but is taking forever), Me(Short Tutorial)

Introduction :: I've seen people make cheat engine trainers which require little to no skill at all, and I still believe that a CT is able to do so much more than a trainer will ever do. In this tutorial, you guys will learn how to create, save, open, and use a cheat table.
__________________

Requirements :: Cheat Engine 5.4, you may download the installation here, which I got from http:://****************/downloads
__________________

Step 1 :: Open and bypass CA.

Step 2 :: Open Cheat Engine 5.4


Step 3 :: Click the "Settings" button on the cheat engine, it's under the picture of the logo. This will allow you to configure it so that it'll auto-attach like my engine does.


Step 4 :: Type in 'Engine.exe' without the quotes into the value box next to "Automatically attach to processes named"


Step 5 :: Click OK and restart Cheat Engine 5.4. It should auto-attach now, which is good.

Step 6 :: Go into CA and enter a match, we're looking for god mode.

Step 7 (A) :: Since we start off with 100 HP, type 100 into the value box. and click "First Scan"

Step 7 (B) :: You'll notice that you've found a lot of addresses. Go back into CA and get hurt somehow, but don't die just yet.

Step 7 (C) :: ALT+TAB out of CA and type in your new HP amount and click "Next Scan"

Step 7 (D) :: Repeat this process until you get 1 address.

Step 8 :: Double click that address and it'll appear in the CT.


Step 9 :: You'll notice a little square checkbox to the left of the address you've just added. Tick it, and you'll notice that you've just froze(i use this term very loosely) your HP address. Double click your HP value and put it to 100, for maximum HP.

Step 10 :: I know you won't be able to use this pointer again, but in this tutorial, you'll be learning how to save this CT.

Step 11 (A) :: Click the floppy disk on the cheat engine.

Step 11 (B) :: Browse to a location and type in a name for the CT

Step 11 (C) :: Click "Save"

Step 12 (A) :: Now that you've learned how to create and save .CTs, you'll learn how to open it. Click the open folder button on CE.

Step 12 (B) :: Browse to the location you saved your CT at

Step 12 (C) :: Double click your CT file.

Step 13 :: You've just opened a CT, all you have to know now is how to use it, which is extremely easy.


Step 14 :: Go into game and freeze the HP/AP/SP Lock Pointers if you've downloaded me or pownage's CT.

Step 15 :: The EXP Pointers are all linked, so changing one would change all of them, but just worry about one. Same goes for the TEAM Pointers.

Step 16 :: If you plan on using BACKPACK/VEST hack, go into a store, change the value from 1-5 on BACKPACK, and 1-3 for VEST. Freeze them and exit the shop, and go back in again.
__________________

Note :: Since you've read this entire thread, you should know how to use a CT and search for addresses. I'll provide a tutorial on how to find static pointers soon, but hey, everything takes time and I'm in a hurry.

Have fun~

WOOT! first reply!, NICE JOB Combatant!, great TUT!!!!!

Yes very nice thanks. The SP works, the HP works but when in constant fire it dont work......so well. Also whts AP?

great tutorial...
btw, is ce detected by warrock?

like you kno how warrock searches files on your computer... is ce a file it searches for?

I dont know myself, you might want to look on the warrok forums for that answer!

already tried it, it dont work it says u got it, but i think they switched the exp and gp to server sided

Combatant, Mind if i toss this in the next version of my hackpack ? (Of course you're Credited) I also suggest for more noob love to write a tut on Getting started with hacking, an explanation for each hack and such (i was gonna write this but i'm too tired right now lol)