Home › Forum › MultiPlayer Game Hacks & Cheats › Other MMORPG Hacks › MapleStory Hacks, Cheats & Trainers › [Tutorial] Hack Maple Story's Mob.wz
[Tutorial] Hack Maple Story's Mob.wz
[Tutorial] Hack Maple Story's Mob.wz
By: Oneirish
TuT Hex Editing Mob.wz
i. Introduction
ii. Requirements
iii. BodyAttack
iV. PADamage
V. MADAmage
Vi. Undead
Vii. Credits/Closing
I. Introduction
This guide was made to show people who don't quite understand how to hex edit the mob.wz, edit it better. Also to reduce the "How do" threads.
II. Requirements
Download/ Install
IHEX - MemeCode - i.Hex (Used to edit mob.wz)
Apollo's Offset Pack - MEGAUPLOAD - The leading online storage and file delivery service (Used to find the certain offset you want. Ex Bodyattack for Yeti.)
Mob.wz Back up - MEGAUPLOAD - The leading online storage and file delivery service (In case you mess something up)
Stuff You Need To Know
Decimal to Hex conversion - Cheat Engine :: View topic - (RLS) HEX Helper (Credits to ElJEffro)
or you could use the Microsoft Calculator (Scientific Mode)
Monster Image ID - Cheat Engine :: View topic - [Release]All of the monsters names with their code just find ( Credits to blankrider) or use Sauna : GMS @ 00040 : Monster Search
Monster Stats - Sauna : GMS @ 00040 : Monster Search
III. BodyAttack
- Editing bodyattack will make the monster either give you touch damage or not give you touch damage.
00 - No Damage
01- Damage
Step 1 - Open the Apollo's Offset folder that you downloaded and open the text file called BodyAttack.
Step 2 - Decide what monster you want to edit and look for it's BodyAttack offset.
Ex. Yeti's Image ID is 6300000 (found on blankrider's thread.) Okay so now we open the BodyAttack text file and hit ctrl F to open the find function. When the find function is open paste the Monsters Image ID that you want to edit in there and press enter or find next. Now the number 6300000 should be highlighted and a line under it should say bodyattack 11169908 0. The offset that you want is the value between the words bodyattack and the far right 0, so that means the bodyattack offset for Yeti is 11169908. Highlight that number and copy it.
Step 3 - With the offset copied go to your maplestory folder and open the mob.wz with IHEX.
Step 4 - Once Mob.wz opens with IHEX, go to the upper left hand corner and make sure the check box that says hex is unchecked. Then paste the offset that you copied in the offset box and hit enter.
Your screen should look like this before you hit enter.
Step 5 - After you hit enter you should be brought to something that looks like 03 00 or 03 01, depending if bodyattack is on or off for the monster. Next if you want to the bodyattack on for the monster click on the 00 after the 03 and change it to 01 via upper right hand corner. To turn it off you change it to 00. (Change it by typing 00 or 01 and pressing enter)
I am turning the yeti's body attack off so your screen should look like this.
Step 6 - After you are done turning it on or off save and close the file.
IV. PADamage
Editing the PADamage will change the amount of physical damage is done to you from the monster of your choosing.
I recommend changing it to something above 3 so that the damage that is done to you isn't constant and you wont d/c.
Step 1 - Open the Apollo's Offset pack and open the PADamage text file.
Step 2 - Decide which monsters PADamage you want to edit, and look for the offset like you did for the bodyattack.
Step 3 - Go to the monster stat website and check the monster you chose, PaDamage and convert it to Hex.
Ex. Yeti's PADamage is 182, 182 turned to hex is B6.
Step 4 - Search for the monsters PADamage offset you chose in the mob.wz with IHex.
Ex. Yeti's PADamage offset was 11169960, after searching this with IHEX your screen should look like this. Now after you are taken to the 03 80 area look for the monsters PADamage that you turned into Hex. For this Example you will be looking for B6.
Step 5 - After finding the PADamage in HEX and clicking on it, change the value that you want the PADamage to be in HEX.
Ex. I want to change Yeti's PADamage to 5 so 5 in HEX would be 05. So after I click on B6 I change it to 05 and press enter. Your screen should look like this.
Step 6 - After you're done editing save and close the file.
V. MADamage
Editing the MADamage will change the amount of Magical Damage that is delt to you.
I recommend chaning this to a value above 4 so that you don't d/c.
Step 1 - Open the Apollo's Offset folder and search for the monsters MADamage offset that you want to change. ( Like you have done previously.
Step 2 - Go to the monster stat website and look at the monsters MADamage that you want to change and turn it to HEX.
Ex. Yeti's MA Damage is 270, so converting that into HEX would make it 10E.
Step 3 - Search for the monster you chose, offset in the mob.wz with IHEX.
Ex. Yeti's MADamage offset was 11169992, after searching this with IHEX your screen should look like this. Now after you are taken to the 03 80 area look for the monsters MADamage that you turned into Hex. For this Example you will be looking for a diffrent value since you can't have 10E. When you are looking up HEXs that are more then 255 in the mob.wz they will be backwards. Like the Yetis is in the following picture. ( 0E 01)
Step 4 - After finding the MADamage in HEX and clicking on it, change it to the value of the MADamage that you want in HEX.
Ex. I want to change the Yeti's MADamage to 5 so I change the part that says 0E 01 to 05 00. After you change that the screen should look like this.
Step 5 - After changing the MADamage you want save and close the file.
VI. Undead
Editing the undead offset can change the monster to be undead or not undead.
01 - Undead
00 - Not Undead
Step 1 - Open Apollo's Offset pack and open the undead text file.
Step 2 - Choose a monster and search for the undead offset like you have done previously.
Step 3 - After finding the offset of the monster that you want to make undead or not undead search for it in the mob.wz with IHEX.
Ex. Yeti's undead offset it 11170047 searching it in mob.wz will bring you to something that looks like this 03 00.
Step 4 - After it brings you to 03 the next two number will either be 00 for not undead or 01 for undead. If you want it to be undead change the two number after 03 to 01 or if you want it to not be undead change it to 00.
Ex. Yeti was not undead and I changed it to undead.
Step 5 - After making monsters undead or not save the file and close.
VII. Credits and Closing
Credits go to:
-Oneirish
If any one has any question or wants me to add something just let me know. Hope this help someone
***NOTICE***
BACK UP MOB.WZ. If you don't back up you cannot update.
TuT Hex Editing Mob.wz
i. Introduction
ii. Requirements
iii. BodyAttack
iV. PADamage
V. MADAmage
Vi. Undead
Vii. Credits/Closing
I. Introduction
This guide was made to show people who don't quite understand how to hex edit the mob.wz, edit it better. Also to reduce the "How do" threads.
II. Requirements
Download/ Install
IHEX - MemeCode - i.Hex (Used to edit mob.wz)
Apollo's Offset Pack - MEGAUPLOAD - The leading online storage and file delivery service (Used to find the certain offset you want. Ex Bodyattack for Yeti.)
Mob.wz Back up - MEGAUPLOAD - The leading online storage and file delivery service (In case you mess something up)
Stuff You Need To Know
Decimal to Hex conversion - Cheat Engine :: View topic - (RLS) HEX Helper (Credits to ElJEffro)
or you could use the Microsoft Calculator (Scientific Mode)
Monster Image ID - Cheat Engine :: View topic - [Release]All of the monsters names with their code just find ( Credits to blankrider) or use Sauna : GMS @ 00040 : Monster Search
Monster Stats - Sauna : GMS @ 00040 : Monster Search
III. BodyAttack
- Editing bodyattack will make the monster either give you touch damage or not give you touch damage.
00 - No Damage
01- Damage
Step 1 - Open the Apollo's Offset folder that you downloaded and open the text file called BodyAttack.
Step 2 - Decide what monster you want to edit and look for it's BodyAttack offset.
Ex. Yeti's Image ID is 6300000 (found on blankrider's thread.) Okay so now we open the BodyAttack text file and hit ctrl F to open the find function. When the find function is open paste the Monsters Image ID that you want to edit in there and press enter or find next. Now the number 6300000 should be highlighted and a line under it should say bodyattack 11169908 0. The offset that you want is the value between the words bodyattack and the far right 0, so that means the bodyattack offset for Yeti is 11169908. Highlight that number and copy it.
Step 3 - With the offset copied go to your maplestory folder and open the mob.wz with IHEX.
Step 4 - Once Mob.wz opens with IHEX, go to the upper left hand corner and make sure the check box that says hex is unchecked. Then paste the offset that you copied in the offset box and hit enter.
Your screen should look like this before you hit enter.
Step 5 - After you hit enter you should be brought to something that looks like 03 00 or 03 01, depending if bodyattack is on or off for the monster. Next if you want to the bodyattack on for the monster click on the 00 after the 03 and change it to 01 via upper right hand corner. To turn it off you change it to 00. (Change it by typing 00 or 01 and pressing enter)
I am turning the yeti's body attack off so your screen should look like this.
Step 6 - After you are done turning it on or off save and close the file.
IV. PADamage
Editing the PADamage will change the amount of physical damage is done to you from the monster of your choosing.
I recommend changing it to something above 3 so that the damage that is done to you isn't constant and you wont d/c.
Step 1 - Open the Apollo's Offset pack and open the PADamage text file.
Step 2 - Decide which monsters PADamage you want to edit, and look for the offset like you did for the bodyattack.
Step 3 - Go to the monster stat website and check the monster you chose, PaDamage and convert it to Hex.
Ex. Yeti's PADamage is 182, 182 turned to hex is B6.
Step 4 - Search for the monsters PADamage offset you chose in the mob.wz with IHex.
Ex. Yeti's PADamage offset was 11169960, after searching this with IHEX your screen should look like this. Now after you are taken to the 03 80 area look for the monsters PADamage that you turned into Hex. For this Example you will be looking for B6.
Step 5 - After finding the PADamage in HEX and clicking on it, change the value that you want the PADamage to be in HEX.
Ex. I want to change Yeti's PADamage to 5 so 5 in HEX would be 05. So after I click on B6 I change it to 05 and press enter. Your screen should look like this.
Step 6 - After you're done editing save and close the file.
V. MADamage
Editing the MADamage will change the amount of Magical Damage that is delt to you.
I recommend chaning this to a value above 4 so that you don't d/c.
Step 1 - Open the Apollo's Offset folder and search for the monsters MADamage offset that you want to change. ( Like you have done previously.
Step 2 - Go to the monster stat website and look at the monsters MADamage that you want to change and turn it to HEX.
Ex. Yeti's MA Damage is 270, so converting that into HEX would make it 10E.
Step 3 - Search for the monster you chose, offset in the mob.wz with IHEX.
Ex. Yeti's MADamage offset was 11169992, after searching this with IHEX your screen should look like this. Now after you are taken to the 03 80 area look for the monsters MADamage that you turned into Hex. For this Example you will be looking for a diffrent value since you can't have 10E. When you are looking up HEXs that are more then 255 in the mob.wz they will be backwards. Like the Yetis is in the following picture. ( 0E 01)
Step 4 - After finding the MADamage in HEX and clicking on it, change it to the value of the MADamage that you want in HEX.
Ex. I want to change the Yeti's MADamage to 5 so I change the part that says 0E 01 to 05 00. After you change that the screen should look like this.
Step 5 - After changing the MADamage you want save and close the file.
VI. Undead
Editing the undead offset can change the monster to be undead or not undead.
01 - Undead
00 - Not Undead
Step 1 - Open Apollo's Offset pack and open the undead text file.
Step 2 - Choose a monster and search for the undead offset like you have done previously.
Step 3 - After finding the offset of the monster that you want to make undead or not undead search for it in the mob.wz with IHEX.
Ex. Yeti's undead offset it 11170047 searching it in mob.wz will bring you to something that looks like this 03 00.
Step 4 - After it brings you to 03 the next two number will either be 00 for not undead or 01 for undead. If you want it to be undead change the two number after 03 to 01 or if you want it to not be undead change it to 00.
Ex. Yeti was not undead and I changed it to undead.
Step 5 - After making monsters undead or not save the file and close.
VII. Credits and Closing
Credits go to:
-Oneirish
If any one has any question or wants me to add something just let me know. Hope this help someone
***NOTICE***
BACK UP MOB.WZ. If you don't back up you cannot update.
Similar Threads
- 0Last post
- 6Last post
- 2Last post
Originally Posted by PyroCorona
