Home › Forum › MultiPlayer Game Hacks & Cheats › Other MMORPG Hacks › MapleStory Hacks, Cheats & Trainers › [1.03.00] GG2 V0.08.01 MPGH Edition
[1.03.00] GG2 V0.08.01 MPGH Edition
[1.03.00] GG2 V0.08.01 MPGH Edition
Hey guys. Sorry that I haven't really been giving much attention to putting releases in this section. The problem is that after becoming Minion, I now have to approve my own files -- and because I get most of my releases from somewhere else, I have to check the files code for any possible viruses. That's put a lot of pressure on me that wasn't there before, considering I'd just put everything here and Sketchy would make sure it was clean. Regardless, here is the latest version of GG2. Credits go to a man named Rumias. Let me know if there are any issues, and enjoy!
Originally Posted by Rumias
Originally Posted by Rumias
GG2V0.08.01
A note from me...
Hello everyone once again. As you can tell I have once again come back to drop off my latest update on GG2 and this time I think I'll stay a while. Anyways with the current array of bypass less hacks avalible right now this is unfortunely the best I can do but I will continue to try to tweak hacks to optimize them. But remember this isn't just my trainer, it's yours so any feedback would be great, whether it's about bugs or glitches or even with the GUI or any annoyances. I hope you enjoy and happy hacking.
What's New?
I have made several changes to this version of GG2, most of which has been listed as future features in the old GG2 thread. The main changes are as follows:
1. Completely reworked botting system.
Implemented a schedule system. There will not be much of a difference felt through the use of botting features however this system will make changing things in the future much easier
2. Save/Load/Disable all enabled hacks
The three new buttons on the left side are save/load/disable all hacks buttons. The save button allows one to save all enabled (checked) hacks. The load button will allow one to reenable all hacks saved previously. Right clicking any of the three buttons will bring up a pop-up menu allowing one to save enabled states as a seperate files that can be then loaded at a later time allowing long term saves.
HINT: clicking disable all once will disable all hacks EXCEPT physical godmode (if it is enabled). Clicking disable all again will disable all hacks including godmode.
3. Profiles
It's common to have multiple accounts and that's what the profile system is for. For instance you might have auto pot set to 100hp and 100mp for one account but you may wish to set it to 1000hp and 1000mp on another. The profile system allows one to easily switch between character settings
Hint: New profiles can be added by first typing in a name for your profile in the box beside the plus sign. Then click the plus sign (aka the New profile button). Removing profiles can be done in a similar way. Simply select the profile from the drop down and then click the minus sign (toolStripButton1...oh wait OPS).
4. Fixed kami (now it's only half dead)
I implemented a cheap fix to kami. AKA simply adding a delay to kami such that using it will not dc you. The good thing with this is that kami is now most likely the safest vac hack on this trainer (I've tried botting with it for 4 hours before quitting with no problems at all). The second good thing is that kami now works for all character and skills meaning any skills with air check can be used!
Recommended Configurations to Botting
These two configurations are most likely the safest and most effective configs. If you are new or have been banned way too much maybe trying one of these will help:
1. Kami - Enable these (with the specified settings):
- Kami (with default settings)
- Auto CS (timed): 300 (30 seconds)
- Auto CC (people): 0
- Auto attack, skill, pot as needed
- WARNING: Auto loot with kami is NOT recommended and is known to cause [increased odds of] auto bans.
- Note: Anything not specified here is best left disabled
1. Wallvac - Enable these (with the specified settings):
- Wallvac (with default settings)
- Auto CS (timed): 150 (30 seconds)
- Auto CC (people): 0
- Auto attack, skill, pot, loot as needed
- Physical Godmode
- Note: Anything not specified here is best left disabled
MapRusher
Yep maprusher is still crippled but is usable if you follow the following instructions:
1. Go to the map rusher tab and click refresh map
2. Head over to your nearest portal and position yourself right on top of it
3. Press F11 and then press the up arrow key (this should allow you to enter the portal)
4. Check if it worked by looking for a "key" under the acquire key button
5. If it didn't work repeat steps 2-4 (you need to press F11 THEN enter the portal, also the faster you do this the better)
6. You are done! You should now be able to use maprusher normally.
To use maprusher after set up, simply select a map from the list and click rush!
Safe Mode
For new users, safe mode is a mode that this trainer operates in that allows the trainer to function without a bypass since no bypass is publicly available right now. In other words use this trainer in safe mode. You can enter safe mode by clicking the safe mode button in the toolbox at the very top of the trainer then follow the instructions in the pop up.
NOTE: The trainer is-by default-in safe mode.
Updating
GG2 like GGTrainer is equipped with fully dynamic pointers. In layman terms this trainer can update itself to work on any version of maplestory (ok maybe not any)! To update the trainer click on the update button in the toolbar. The toolbar is located at the very top of the trainer. There you will see an assortment of buttons with icons. If you are not sure which button is the update button, keep hovering your mouse over the icons till you read one that says update!
Change Log
v0.08.01
[+]Added the "Set location by mouse" button to wall vac as requested (this update is optional and is not major
A note from me...
Hello everyone once again. As you can tell I have once again come back to drop off my latest update on GG2 and this time I think I'll stay a while. Anyways with the current array of bypass less hacks avalible right now this is unfortunely the best I can do but I will continue to try to tweak hacks to optimize them. But remember this isn't just my trainer, it's yours so any feedback would be great, whether it's about bugs or glitches or even with the GUI or any annoyances. I hope you enjoy and happy hacking.
What's New?
I have made several changes to this version of GG2, most of which has been listed as future features in the old GG2 thread. The main changes are as follows:
1. Completely reworked botting system.
Implemented a schedule system. There will not be much of a difference felt through the use of botting features however this system will make changing things in the future much easier
2. Save/Load/Disable all enabled hacks
The three new buttons on the left side are save/load/disable all hacks buttons. The save button allows one to save all enabled (checked) hacks. The load button will allow one to reenable all hacks saved previously. Right clicking any of the three buttons will bring up a pop-up menu allowing one to save enabled states as a seperate files that can be then loaded at a later time allowing long term saves.
HINT: clicking disable all once will disable all hacks EXCEPT physical godmode (if it is enabled). Clicking disable all again will disable all hacks including godmode.
3. Profiles
It's common to have multiple accounts and that's what the profile system is for. For instance you might have auto pot set to 100hp and 100mp for one account but you may wish to set it to 1000hp and 1000mp on another. The profile system allows one to easily switch between character settings
Hint: New profiles can be added by first typing in a name for your profile in the box beside the plus sign. Then click the plus sign (aka the New profile button). Removing profiles can be done in a similar way. Simply select the profile from the drop down and then click the minus sign (toolStripButton1...oh wait OPS).
4. Fixed kami (now it's only half dead)
I implemented a cheap fix to kami. AKA simply adding a delay to kami such that using it will not dc you. The good thing with this is that kami is now most likely the safest vac hack on this trainer (I've tried botting with it for 4 hours before quitting with no problems at all). The second good thing is that kami now works for all character and skills meaning any skills with air check can be used!
Recommended Configurations to Botting
These two configurations are most likely the safest and most effective configs. If you are new or have been banned way too much maybe trying one of these will help:
1. Kami - Enable these (with the specified settings):
- Kami (with default settings)
- Auto CS (timed): 300 (30 seconds)
- Auto CC (people): 0
- Auto attack, skill, pot as needed
- WARNING: Auto loot with kami is NOT recommended and is known to cause [increased odds of] auto bans.
- Note: Anything not specified here is best left disabled
1. Wallvac - Enable these (with the specified settings):
- Wallvac (with default settings)
- Auto CS (timed): 150 (30 seconds)
- Auto CC (people): 0
- Auto attack, skill, pot, loot as needed
- Physical Godmode
- Note: Anything not specified here is best left disabled
MapRusher
Yep maprusher is still crippled but is usable if you follow the following instructions:
1. Go to the map rusher tab and click refresh map
2. Head over to your nearest portal and position yourself right on top of it
3. Press F11 and then press the up arrow key (this should allow you to enter the portal)
4. Check if it worked by looking for a "key" under the acquire key button
5. If it didn't work repeat steps 2-4 (you need to press F11 THEN enter the portal, also the faster you do this the better)
6. You are done! You should now be able to use maprusher normally.
To use maprusher after set up, simply select a map from the list and click rush!
Safe Mode
For new users, safe mode is a mode that this trainer operates in that allows the trainer to function without a bypass since no bypass is publicly available right now. In other words use this trainer in safe mode. You can enter safe mode by clicking the safe mode button in the toolbox at the very top of the trainer then follow the instructions in the pop up.
NOTE: The trainer is-by default-in safe mode.
Updating
GG2 like GGTrainer is equipped with fully dynamic pointers. In layman terms this trainer can update itself to work on any version of maplestory (ok maybe not any)! To update the trainer click on the update button in the toolbar. The toolbar is located at the very top of the trainer. There you will see an assortment of buttons with icons. If you are not sure which button is the update button, keep hovering your mouse over the icons till you read one that says update!
Change Log
v0.08.01
[+]Added the "Set location by mouse" button to wall vac as requested (this update is optional and is not major
Good Work Bro
Thanks MAN!!!!
Sorry how do i use this hack? im new :/
Originally Posted by d4rksai
Sorry how do i use this hack? im new :/
Err when exactly to inject? I tried it when the launcher was openend (not pressing play yet) I tried it @ the login screen, and ingame but still nothing has happened.
Be incredibly cautious with the SS Click Tele. Don't use it more than 10 times in a row.
ii...this new version seem cannot work for me...im trying with my new warrior...if using the older version whch is version 7...it working but have auto pot problems...huhuhu...dunno how to set the auto pot...it just using it all the time...how to get coordinat to set in vac wal or kami?? also if im set auto cs...it just dc me..any idea?? im new for this thing...
how do i open it...?
Does it work in Maplestory Europe?
how do i get the menu to come up???
GOOD WORK MAN
At least you gave credits :P. Although I'm not too sure about the modification you made *ahem*.
Anyways nice release
Anyways nice release
Nice another update 
Got banned!
I got banned! The program was on safe mode. The only things i enabled was kami and auto attack
Similar Threads
- 16Last post
- 19Last post
- 25Last post
- 7Last post
- 12Last post