Universal Recoil Reducer v1.0
Universal Recoil Reducer v1.0
Copyright © 2012 Георгий Минулин (also known as 63OR63)
Universal Recoil Reducer is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
Universal Recoil Reducer is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
MANY THANKS to Thermonopoly for beta testing!
Universal Recoil Reducer is an Autohotkey script that reduce recoil by pulling the xhair down in any game. You can adjust the intensity of recoil reducing with a few hotkeys to adjust it for your sensitivity, screen resolution and gun perfectly.
Note: VAC status of Universal Recoil Reducer is undetected and it will never change, because it doesn't read/write game memory, inject dll etc.
ON/OFF button is Numpad*.
There are several variables involving in recoil reduction which you can change with hotkeys.
The first is the delay between mouse movements the script implements. The shorter the delay is, the faster is the speed of xhair movement. It can vary from 10 to 100 milliseconds (10 is default). Press Numpad+ or Numpad- to increase or reduce it respectively.
The second variable is the period of time during which the xhair moves up. In practic it influences the max range the xhair moves during one spray. It varies from 700 to 1500 milliseconds (1100 is default). Press PageUp to increase it or PageDown to reduce.
Moreover, there are two presets for using with either heavy (light machine guns and AK47) or light guns (submachine guns, M4 etc.). Home is for heavy guns and End is for light ones.
Also, the script is supplied with single-shot trigger protection, so it will start to do its job after 150 milliseconds of pressing down the left mouse button.
There is no GUI in this script. But small tips will pop-up in top left corner when you press the hotkey, there you'll find the actual information about current settings. The tips can't overlay D3D app, so the are visible only in windowed or windowed fullscreen mode (set this in your game video settings).
1. Start the game
2. Run NoRecoil.exe or NoRecoil.ahk if you have Autohotkey installed
ON/OFF: Numpad*
Delay up: Numpad+
Delay down: Numpad-
Period up: PageUp
Period down: PageDown
Heavy gun: Home
Light gun: End
In the video I used 10 Delay 1400 Period for Negev, 10 Delay 1100 Period for AK47, 20 Delay 900 Period for M4A4 and AUG. I have the resolution of 1920x1080, run the game in windowed fullscreen at 128 FPS (30 FPS at the video). I have RAW mouse input ingame, so my sensitivity is set through by drivers. I use Logitech G9x Laser, so my settings in Logitech SetPoint are: DPI = 3700, Speed = 2, Acceleration = 0, Refresh rate = 1000 Hz.
The settings I use are optimized for my sensitivity and my resolution (1920x1080). So are the presets I included in the release. If these don't suit you, you may try to ask Thermonopoly, he tested the script at 1024x768 resolution and obviously another sensitivity. Also you can easily open NoRecoil in notepad or whatever and adjust the presets to your liking. The code is:
Find the best period and delay values by changing them ingame using hotkeys (don't forget about tips at top left corner, there will be the exact values, if you run windowed or windowed fullscreen), then you may substitute them to the above-mentioned part of code.
VirusTotal, Jotti
Universal Recoil Reducer is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
Universal Recoil Reducer is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
MANY THANKS to Thermonopoly for beta testing!
Description:
Universal Recoil Reducer is an Autohotkey script that reduce recoil by pulling the xhair down in any game. You can adjust the intensity of recoil reducing with a few hotkeys to adjust it for your sensitivity, screen resolution and gun perfectly.
Note: VAC status of Universal Recoil Reducer is undetected and it will never change, because it doesn't read/write game memory, inject dll etc.
Usage:
ON/OFF button is Numpad*.
There are several variables involving in recoil reduction which you can change with hotkeys.
The first is the delay between mouse movements the script implements. The shorter the delay is, the faster is the speed of xhair movement. It can vary from 10 to 100 milliseconds (10 is default). Press Numpad+ or Numpad- to increase or reduce it respectively.
The second variable is the period of time during which the xhair moves up. In practic it influences the max range the xhair moves during one spray. It varies from 700 to 1500 milliseconds (1100 is default). Press PageUp to increase it or PageDown to reduce.
Moreover, there are two presets for using with either heavy (light machine guns and AK47) or light guns (submachine guns, M4 etc.). Home is for heavy guns and End is for light ones.
Also, the script is supplied with single-shot trigger protection, so it will start to do its job after 150 milliseconds of pressing down the left mouse button.
There is no GUI in this script. But small tips will pop-up in top left corner when you press the hotkey, there you'll find the actual information about current settings. The tips can't overlay D3D app, so the are visible only in windowed or windowed fullscreen mode (set this in your game video settings).
tl;dr?
1. Start the game
2. Run NoRecoil.exe or NoRecoil.ahk if you have Autohotkey installed
ON/OFF: Numpad*
Delay up: Numpad+
Delay down: Numpad-
Period up: PageUp
Period down: PageDown
Heavy gun: Home
Light gun: End
Screenshot:
Video demo:
In the video I used 10 Delay 1400 Period for Negev, 10 Delay 1100 Period for AK47, 20 Delay 900 Period for M4A4 and AUG. I have the resolution of 1920x1080, run the game in windowed fullscreen at 128 FPS (30 FPS at the video). I have RAW mouse input ingame, so my sensitivity is set through by drivers. I use Logitech G9x Laser, so my settings in Logitech SetPoint are: DPI = 3700, Speed = 2, Acceleration = 0, Refresh rate = 1000 Hz.
The settings I use are optimized for my sensitivity and my resolution (1920x1080). So are the presets I included in the release. If these don't suit you, you may try to ask Thermonopoly, he tested the script at 1024x768 resolution and obviously another sensitivity. Also you can easily open NoRecoil in notepad or whatever and adjust the presets to your liking. The code is:
Code:
DoLargeRecoilPreset:
delay = 10
period = 1100
TipOn("HEAVY GUN")
return
DoSmallRecoilPreset:
delay = 20
period = 900
TipOn("LIGHT GUN")
return
VirusScans:
VirusTotal, Jotti
Download and Thanks:
Le approved
Cool thnx another great script 
Looks nice, is it okay if I decompile it?
Originally Posted by kila58
Looks nice, is it okay if I decompile it?
when i run it nothing pop up, is that okay ?
Originally Posted by zfum
when i run it nothing pop up, is that okay ?
nice , testing , works!! 
what is the config in the video??
what is the config in the video??
Yes it works but i used HOME for AK47 but then it shoots straight down.
Wanted to know the config to in the video plz
Wanted to know the config to in the video plz
Originally Posted by diablo76
Yes it works but i used HOME for AK47 but then it shoots straight down.
Wanted to know the config to in the video plz
Wanted to know the config to in the video plz
I use 1024x68, and I've been using these values for each of the weapons:
Ak47: 10 Delay, 800 Period, Sleep 150
M4a1: 20 Delay, 700 Period, Sleep 200
Mp7: 30 Delay, 900 Period, Sleep 150
M249: 20 Delay, 900 Period, Sleep 200
Aug: 20 Delay, 700 Period, Sleep 250
Delay is adjustable by + - on the Numpad, it's how fast the cross-hair will pull down when you hold mouse1. The lower the number, the faster the cross-hair will move.
Period is adjustable by PgUp and PgDn, that's how long the mouse will pull down for when you hold mouse1. A setting of 700, for example, means that when you hold down mouse1, the cross-hair will move down for 700 ms before it stops.
Sleep is not adjustable in 630R63's release, and I believe it's permanently set at 150 ms. This means that when you click mouse1, it will wait 150 ms before it starts to pull the crosshair down. This prevents crosshair movement whilst tapping, firing with a pistol, etc. I've found that certain weapons (M4a1, M249, Aug, for example) benefit from a 'slightly' longer sleep time, since their first 2-3 shots are typically pretty accurate. You can easily edit this in the script using autohotkey, but the improvement is only very minor.
But of course, all of this is relative to your screen resolution, so I recommend experimenting and finding your own sweet spots. Perfectly tuned, this anti-recoil script virtually eliminates vertical spread. Your spray patterns will look like pancakes.
---------- Post added at 07:37 PM ---------- Previous post was at 07:33 PM ----------
Originally Posted by j33bus
Doesnt work for me, do i have to put it on my csgo folder?
Ok so yeah. doesn't work no idea why...
Ok so yeah. doesn't work no idea why...
Originally Posted by kila58
Looks nice, is it okay if I decompile it?
Originally Posted by zfum
when i run it nothing pop up, is that okay ?
Originally Posted by slep
nice , testing , works!!
what is the config in the video??
what is the config in the video??
Originally Posted by diablo76
Yes it works but i used HOME for AK47 but then it shoots straight down.
Wanted to know the config to in the video plz
Wanted to know the config to in the video plz
The settings I use are optimized for my sensitivity and my resolution (1920x1080). So are the presets I included in the release. If these don't suit you, you may try to ask Thermonopoly, he tested the script at 1024x768 resolution and obviously another sensitivity. Also you can easily open NoRecoil in notepad or whatever and adjust the presets to your liking. Their code is:
Code:
DoLargeRecoilPreset:
delay = 10
period = 1100
TipOn("HEAVY GUN")
return
DoSmallRecoilPreset:
delay = 20
period = 900
TipOn("LIGHT GUN")
return
[QUOTE=Thermonopoly;6550169]Some of the variables are screen resolution sensitive. What resolution are you using?
I use 1280x800 windows mode
I use 1280x800 windows mode
Thank you 630R63 for scripting an anti-recoil that actually works.
If anyone wants to fine tune it, I highly recommend sitting down with AutoHotKey for a couple of hours and learning the ropes. The script is resolution sensitive, and you can fine tune it to your own game and settings by playing around with the variables.
If anyone wants to fine tune it, I highly recommend sitting down with AutoHotKey for a couple of hours and learning the ropes. The script is resolution sensitive, and you can fine tune it to your own game and settings by playing around with the variables.
Doesnt work for me, do i have to put it on my csgo folder?
Ok so yeah. doesn't work no idea why...
Ok so yeah. doesn't work no idea why...
ima using 1600x900 3500dpi 1000hz razer i use light mode for ak-47 and m4 its good!
This thread is closed for replies.
