MW3 .NET External ESP v3.7 [1.9.461]

// ----------------------------------------------------
// Settings file for MW3 .NET External ESP by master131
// ----------------------------------------------------

// How often in milliseconds to render/draw on the overlay.
// Decreasing will make it render faster but will use more
// CPU power. Increasing will do the opposite. Play around
// with this to optimize the performance of the hack.
RENDER_INTERVAL = 10

// Overrides the name used to create the executable in the temporary
// directory. Leave this empty to let the Launcher randomly generate
// a name but if your Anti-Virus does not like it, give it a name 
// and then add the file to exclusions when it detects it as a virus again.
// An example would be "abc123", remember to add the quotes.
EXECUTABLE_NAME =

// ------------------------- Graphical Settings -------------------------
// All colors are in an 0xAARRGGBB format
// AA = Alpha, RR = Red, GG = Green, BB = Blue

// The quality of all text used in the hack, valid values are:
// Default, Antialiased, ClearType or ClearTypeNatural
// Use ClearType or ClearTypeNatural for better looking text.
TEXT_QUALITY = Default

// ---------- ESP Colors ----------
COLOR_FRIENDLY = 0x000000FF
COLOR_ENEMY = 0x7FFF0000
COLOR_DEAD = 0x000000FF
COLOR_SENTRY = 0x000000FF
COLOR_PLANE = 0x000000FF

// ---------- ESP Settings ----------
ESP_BOX_WIDTH = 1
ESP_PLANE_SENTRY_ENABLE = false // Set to false to disable plane and sentry detection, will use less CPU.

// ---------- Crosshair Settings ----------
CROSSHAIR_SIZE = 10
CROSSHAIR_WIDTH = 2
CROSSHAIR_COLOR = 0xCCFF1111

// ---------- Text Settings ----------
COLOR_PLAYER_NAME = 0x7FFFFFFF
PLAYER_NAME_FONT = "Arial"
PLAYER_NAME_SIZE = 14

// ---------- Aimbot Settings ----------
COLOR_BOT_DOT = 0x7FFFFFFF
BOT_DRAW_DOT = true // Set this to false to hide the aimbot dot.

// ---------- Status Settings ----------
STATUS_COLOR_ACTIVE = 0xFFFFCC00
STATUS_COLOR_INACTIVE = 0xFF777777
STATUS_COLOR_LINE = 0xAF000000

// ---------- Status Labels ----------
F1_LABEL = "Display"
F2_LABEL = "Aimbot"
F3_LABEL = "Esp"
F4_LABEL = "Distance"
F5_LABEL = "Snapline"
F6_LABEL = "Crosshair"
F7_LABEL = "Radar"
F8_LABEL = "Triggerbot"

// ---------- Distance ESP ----------
DISTANCE_ESP_UNIT =  0.03048 // Use 0.03048 for meters, or 0.1 for ft
DISTANCE_ESP_UNIT_NAME = "m" // Use either "m" or "ft"

// ---------- Radar/Mini-map ----------
MAP_COLOR_BACK = 0x44000000
MAP_COLOR_BORDER = 0x7F0000FF
MAP_COLOR_ME = 0xFF00FF00
MAP_COLOR_FRIEND = 0xFF4444FF
MAP_COLOR_ENEMY = 0xFFFF4444

RADAR_SIZE = 160 // The size of the radar in pixels.
RADAR_CENTER_X = 0 // The offset of the radar's X axis from the center of the screen.
RADAR_OFFSET_Y = 30 // The offset of the radar's Y axis from the top of the screen.
RADAR_RANGE = 50 // The scale divider for the radar, the higher the number is, the closer the players are. Note this is only used when the map is not supported.
RADAR_MAP_SHOW = true // Set to false to hide the map from the radar.
RADAR_MAP_BLENDING = 0xDF7F7F7F // The blending color for the radar map.

// ------------------------- Aimbot Settings -------------------------

// The maximum distance in pixels that the mouse is allowed to move from the center of the screen.
BOT_MAX_DIST = 200 // Set this to -1 to ignore any distance restrictions.

// This will reduce the huge "hop" distance after you kill a player to make it look more realistic.
BOT_MAX_HOP_DIST = 50 // Set this to the same number as BOT_MAX_DIST to disable.

// The maximum amount of pixels the aimbot is allowed to aim off the target.
// This will make the aimbot aim wildly. Might make it not look so obvious that you're hacking.
BOT_MAX_JITTER = 0

// The speeds for the aimbot, the explanation for them are as follows:
// BOT_SPEED_1 refers to the aimbot speed when you've JUST aimed at a player
// (which is initially a little slow) but as a certain amount of frames have passed
// (BOT_SPEED_TICK_1), the next speed is activated (BOT_SPEED_2) and after BOT_SPEED_TICK_2
// frames have passed, the speed stays at BOT_SPEED_3. Feel free to fiddle with this.
BOT_SPEED_1 = 4
BOT_SPEED_TICK_1 = 10
BOT_SPEED_2 = 2
BOT_SPEED_TICK_2 = 20
BOT_SPEED_3 = 1

// The height from the player's feet to aim at depending on the pose.
// Set BOT_STAND_Z to 55 for more headshots, just note that this can
// unbalance your stats and make it very obvious that you are hacking.
BOT_STAND_Z = 49
BOT_CROUCHED_Z = 39
BOT_PRONE_Z = 10

// ------------------------- Triggerbot Settings -------------------------

// The amount of frames that have to pass before firing another bullet.
TRIGGER_BOT_FIRE_INTERVAL = 2 // Decrease to fire faster.
TRIGGER_BOT_REQUIRE_BOT_KEY = false // Set to false to be able to just hover over enemies and shoot automatically.

// ------------------------- Hotkey Settings ------------------------- 
// For a list of key names, please refer here:
// http://msdn.microsof*****m/en-us/library/system.windows.forms.keys.aspx
// You can also map multiple keys to an option, just make to to seperate them using a semi-colon.
// If you wish to disable a feature completely, use None.
// Example: KEY_STATUS = None

KEY_STATUS = F1
KEY_AIMBOT_ACTIVE = F2
KEY_BOXESP = F3
KEY_DISTANCE = F4
KEY_BOX_SNAPLINE = None
KEY_CROSSHAIR = F6
KEY_RADAR = F7
KEY_TRIGGERBOT = None

KEY_TRIGGER_BOT_KEY = RButton // The key that is held down to activate the triggerbot, can be the same as KEY_BOT.
KEY_TRIGGER_BOT_FIRE_KEY = H // The key that is pressed to fire when triggerbot is active, only 1 key is allowed.
KEY_BOT = RButton;F // The key that is held down to activate the aimbot.

------------------------------------
An unhandled exception has occurred!
------------------------------------

------------ Exception: ------------
System****.FileNotFoundException: Could not load file or assembly 'QuickInterop, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'QuickInterop, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'
   at ..(String[] )
   at ..(String[] )

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

------------------------------------

-------- System Information: -------
Operating System: Microsoft Windows 7 Home Premium 
Graphic Card(s): NVIDIA GeForce GT 220 
Aero Enabled: Yes
------------------------------------