running injectors?

ok im new i thought i knew how to use injectors but when i inject or when it autos it says injected file name at bottom and loads combat arms it looks like it loaded them but insert doesn't work or any other hacks

i tryed perx,superinject,vista hacks,and a few others


~im 32 bit vista pentium~

Your .dll that your injecting might be patched!!
are you running as admin?? If not do so to both CA and injector

^^
What he said

But also, you know, xplicitt has come out with a few injectors. Might want to try one.

Dont double post.
And make sure you do the following to get it to work:

Run the injector as Admin (if on vista/7)
Set it to inject into Engine.exe (yes you need the capitol E on Engine)
Set it to close after injecting
Set it to auto-inject
Put the hacks in the correct order.
Start CA (not as admin)
Once in and it is loaded, then press Insert.

Run the injector as Admin (if on vista/7)
Set it to inject into Engine.exe (yes you need the capitol E on Engine)
Set it to close after injecting
Set it to auto-inject
Put the hacks in the correct order.
Start CA
ALT-TAB (if you don't have windowed mode)
Inject hacks after you log in (get your hacks ready to inject before you start CA)
Then wait for the menu to pop up (I do the fir "The Hack" 1.2.4)
Hacks should inject and work correctly

Thank me if it helped you

No problem.

^.^