CA D3D9 Base?

Not looking for anything too fancy just a simple base that works with CA and doesn't get detected.

Even an out-dated base would be fine...

Look in CABR section, has a lot of bases that still works..

Originally Posted by Hacker Fail

Look in CABR section, has a lot of bases that still works..

On BR Version, if anything else it will crash.

Originally Posted by PeachCreame

On BR Version, if anything else it will crash.

If you update the address and class, no.

Originally Posted by Hacker Fail

If you update the address and class, no.

What about detection of 0xE9 jumps

Originally Posted by PeachCreame

What about detection of 0xE9 jumps

Code:

LPVOID DetourCreateType( PBYTE pbTargetFunction, PBYTE pbDetourFunction, INT intSize, INT intType )
{
    #define Detour1        1    // Undetected by BlackCipher II
    #define Detour2        2    // Undetected by BlackCipher II
    #define Detour3        3    // Undetected by BlackCipher II
    #define Detour4        4    // Undetected by BlackCipher II
    #define Detour5        5    // Undetected by BlackCipher II
 
    DWORD dwProtect;
    PBYTE pbDetour = ( PBYTE  )malloc( intSize + 5 );
    INT i;
 
    VirtualProtect( pbTargetFunction, intSize, PAGE_EXECUTE_READWRITE, &dwProtect );
    memcpy( pbDetour, pbTargetFunction, intSize );
    pbDetour += intSize;
 
    *( BYTE * ) ( pbDetour + 0 ) = 0xE9;
    *( DWORD * )( pbDetour + 1 ) = ( DWORD )( pbTargetFunction + intSize - pbDetour ) - 5;
 
    switch( intType )
    {
    case 1:
        *( BYTE * ) ( pbTargetFunction + 0 ) = 0xB8;
        *( DWORD * )( pbTargetFunction + 1 ) = ( DWORD )( pbDetourFunction );
        *( WORD * ) ( pbTargetFunction + 5 ) = 0xE0FF;
        i = 7;
        break;
 
    case 2:
        *( WORD * ) ( pbTargetFunction + 0 ) = 0xC033;
        *( WORD * ) ( pbTargetFunction + 2 ) = 0xC085;
        *( WORD * ) ( pbTargetFunction + 4 ) = 0x840F;
        *( DWORD * )( pbTargetFunction + 6 ) = ( DWORD )( pbDetourFunction - pbTargetFunction ) - 10;
        i = 10;
        break;
 
    case 3:
        *( WORD * ) ( pbTargetFunction + 0 ) = 0xDB33;
        *( WORD * ) ( pbTargetFunction + 2 ) = 0xDB85;
        *( WORD * ) ( pbTargetFunction + 4 ) = 0x840F;
        *( DWORD * )( pbTargetFunction + 6 ) = ( DWORD )( pbDetourFunction - pbTargetFunction ) - 10;
        i = 10;
        break;
 
    case 4:
        *( WORD * ) ( pbTargetFunction + 0 ) = 0xC933;
        *( WORD * ) ( pbTargetFunction + 2 ) = 0xC985;
        *( WORD * ) ( pbTargetFunction + 4 ) = 0x840F;
        *( DWORD * )( pbTargetFunction + 6 ) = ( DWORD )( pbDetourFunction - pbTargetFunction ) - 10;
        i = 10;
        break;
 
    case 5:
        *( WORD * ) ( pbTargetFunction + 0 ) = 0xD233;
        *( WORD * ) ( pbTargetFunction + 2 ) = 0xD285;
        *( WORD * ) ( pbTargetFunction + 4 ) = 0x840F;
        *( DWORD * )( pbTargetFunction + 6 ) = ( DWORD )( pbDetourFunction - pbTargetFunction ) - 10;
        i = 10;
        break;
    }
 
    for( ; i < intSize; i++ )
        *( BYTE * )( pbTargetFunction + i ) = 0x90;
 
    VirtualProtect( pbTargetFunction, intSize, dwProtect, &dwProtect );
 
    return ( pbDetour - intSize );
}

Credits go to @WE11ington
Should work without dc

Originally Posted by Skaterforeva1

Code:

LPVOID DetourCreateType( PBYTE pbTargetFunction, PBYTE pbDetourFunction, INT intSize, INT intType )
{
    #define Detour1        1    // Undetected by BlackCipher II
    #define Detour2        2    // Undetected by BlackCipher II
    #define Detour3        3    // Undetected by BlackCipher II
    #define Detour4        4    // Undetected by BlackCipher II
    #define Detour5        5    // Undetected by BlackCipher II
 
    DWORD dwProtect;
    PBYTE pbDetour = ( PBYTE  )malloc( intSize + 5 );
    INT i;
 
    VirtualProtect( pbTargetFunction, intSize, PAGE_EXECUTE_READWRITE, &dwProtect );
    memcpy( pbDetour, pbTargetFunction, intSize );
    pbDetour += intSize;
 
    *( BYTE * ) ( pbDetour + 0 ) = 0xE9;
    *( DWORD * )( pbDetour + 1 ) = ( DWORD )( pbTargetFunction + intSize - pbDetour ) - 5;
 
    switch( intType )
    {
    case 1:
        *( BYTE * ) ( pbTargetFunction + 0 ) = 0xB8;
        *( DWORD * )( pbTargetFunction + 1 ) = ( DWORD )( pbDetourFunction );
        *( WORD * ) ( pbTargetFunction + 5 ) = 0xE0FF;
        i = 7;
        break;
 
    case 2:
        *( WORD * ) ( pbTargetFunction + 0 ) = 0xC033;
        *( WORD * ) ( pbTargetFunction + 2 ) = 0xC085;
        *( WORD * ) ( pbTargetFunction + 4 ) = 0x840F;
        *( DWORD * )( pbTargetFunction + 6 ) = ( DWORD )( pbDetourFunction - pbTargetFunction ) - 10;
        i = 10;
        break;
 
    case 3:
        *( WORD * ) ( pbTargetFunction + 0 ) = 0xDB33;
        *( WORD * ) ( pbTargetFunction + 2 ) = 0xDB85;
        *( WORD * ) ( pbTargetFunction + 4 ) = 0x840F;
        *( DWORD * )( pbTargetFunction + 6 ) = ( DWORD )( pbDetourFunction - pbTargetFunction ) - 10;
        i = 10;
        break;
 
    case 4:
        *( WORD * ) ( pbTargetFunction + 0 ) = 0xC933;
        *( WORD * ) ( pbTargetFunction + 2 ) = 0xC985;
        *( WORD * ) ( pbTargetFunction + 4 ) = 0x840F;
        *( DWORD * )( pbTargetFunction + 6 ) = ( DWORD )( pbDetourFunction - pbTargetFunction ) - 10;
        i = 10;
        break;
 
    case 5:
        *( WORD * ) ( pbTargetFunction + 0 ) = 0xD233;
        *( WORD * ) ( pbTargetFunction + 2 ) = 0xD285;
        *( WORD * ) ( pbTargetFunction + 4 ) = 0x840F;
        *( DWORD * )( pbTargetFunction + 6 ) = ( DWORD )( pbDetourFunction - pbTargetFunction ) - 10;
        i = 10;
        break;
    }
 
    for( ; i < intSize; i++ )
        *( BYTE * )( pbTargetFunction + i ) = 0x90;
 
    VirtualProtect( pbTargetFunction, intSize, dwProtect, &dwProtect );
 
    return ( pbDetour - intSize );
}

Credits go to @WE11ington
Should work without dc

I dont even think you need to use detours these days :P i literally can call my Hack from DLLMain and render D3D Just as good :P

Edit. In doing this CA can detect any extra code attached to engine

Originally Posted by PeachCreame

I dont even think you need to use detours these days :P i literally can call my Hack from DLLMain and render D3D Just as good :P

Edit. In doing this CA can detect any extra code attached to engine

Hm, CANA detects hook engine ? Because in CABR works fine.

Originally Posted by PeachCreame

I dont even think you need to use detours these days :P i literally can call my Hack from DLLMain and render D3D Just as good :P

Edit. In doing this CA can detect any extra code attached to engine

Shit I'll have to try that. I haven't even hacked CA since since probably early 2015.

Originally Posted by Hacker Fail

Look in CABR section, has a lot of bases that still works..

Will do thanks

CA D3D9 Base?

Similar Threads

Tags for this Thread