Fishing Pointer
May Be outdated if it is inform !
0x004C15808
0x004C15808
InfoFishing Pointer
Pointer=0x00FBFDEC
WaterOffset=0x68+0xf4+0x6c+0xd0+0x5c+0x6cc
ChocoOffset=0x68+0xf4+0x6c+0xd0+0x5c+0x934
LavaOffset=0x68+0xf4+0x6c+0xd0+0x5c+0xBA0
PlasmaOffset=in progress(leave empty)
StateWaterOffset=0x68+0xF4+0x6C+0xCC+0x74+0x798
StateChocoOffset=0x68+0xF4+0x6C+0xCC+0x74+0xA00
StateLavaOffset=0x68+0xF4+0x6C+0xCC+0x74+0x530
StatePlasmaOffset=in progress(leave empty)
WaterOffset=0x68+0xf4+0x6c+0xd0+0x5c+0x6cc
ChocoOffset=0x68+0xf4+0x6c+0xd0+0x5c+0x934
LavaOffset=0x68+0xf4+0x6c+0xd0+0x5c+0xBA0
PlasmaOffset=in progress(leave empty)
StateWaterOffset=0x68+0xF4+0x6C+0xCC+0x74+0x798
StateChocoOffset=0x68+0xF4+0x6C+0xCC+0x74+0xA00
StateLavaOffset=0x68+0xF4+0x6C+0xCC+0x74+0x530
StatePlasmaOffset=in progress(leave empty)
Originally Posted by secretsniper01
Pointer=0x00FBFDEC
WaterOffset=0x68+0xf4+0x6c+0xd0+0x5c+0x6cc
ChocoOffset=0x68+0xf4+0x6c+0xd0+0x5c+0x934
LavaOffset=0x68+0xf4+0x6c+0xd0+0x5c+0xBA0
PlasmaOffset=in progress(leave empty)
StateWaterOffset=0x68+0xF4+0x6C+0xCC+0x74+0x798
StateChocoOffset=0x68+0xF4+0x6C+0xCC+0x74+0xA00
StateLavaOffset=0x68+0xF4+0x6C+0xCC+0x74+0x530
StatePlasmaOffset=in progress(leave empty)
WaterOffset=0x68+0xf4+0x6c+0xd0+0x5c+0x6cc
ChocoOffset=0x68+0xf4+0x6c+0xd0+0x5c+0x934
LavaOffset=0x68+0xf4+0x6c+0xd0+0x5c+0xBA0
PlasmaOffset=in progress(leave empty)
StateWaterOffset=0x68+0xF4+0x6C+0xCC+0x74+0x798
StateChocoOffset=0x68+0xF4+0x6C+0xCC+0x74+0xA00
StateLavaOffset=0x68+0xF4+0x6C+0xCC+0x74+0x530
StatePlasmaOffset=in progress(leave empty)
Originally Posted by PandaTwo
isn't working any liquid
Are you sure it's not working? I checked on 2 different accounts and it was fine.
Also, tell me in which part you struggle when you're trying to find the pointers/offsets. I learned how to do it yesterday so maybe i could help you.
Originally Posted by secretsniper01
Hmm weird. On another thread a person said it was working.
Are you sure it's not working? I checked on 2 different accounts and it was fine.
Also, tell me in which part you struggle when you're trying to find the pointers/offsets. I learned how to do it yesterday so maybe i could help you.
Are you sure it's not working? I checked on 2 different accounts and it was fine.
Also, tell me in which part you struggle when you're trying to find the pointers/offsets. I learned how to do it yesterday so maybe i could help you.
I open cheat engine, do the steps and got an address.
Then, I reopen trove (after doing map) and do all again to rescan the memory from map to the second address.
Now is my question, what is the base address and how I can get state and flat offsets?
As I saw, the state is the offset in the scan, and use hex calculator to get others, but how I can get the bite?
So, to resume, my questions are:
- What is the baseaddress?
- How I can get the bite address?
Okay so first of all let me explain a few things.
Pointer(base adress) is the adress for fishing. Just fishing. To scan for it you just search for 1 when fishing and for 0 when not fishing.
WaterStateOffset = fishing IN WATER
WaterOffset = Bait caught IN WATER
After you found the base adress 2 times, and after you made the second pointer scan, you can select probably any adress. Thats your base adress(pointer).
The fact that you were scanning IN WATER lets you get the STATE offset values. So basically after you make the second pointer scan you result in having the base adress (pointer) and the WaterStateOffset.
At this point, when you paste the Pointer and WaterStateOffset in the config, the bot should indicate that the liquid type is Water (at least in nippys fishbot). If it says unknown, you could try selecting a different base adress and offsets from the second scan.
The last thing you need is the WaterOffset. To get it you scan for 1 in cheat engine when the bait is caught and scan for 0 when its not(could be even fishing).
You do the exact same thing as with the previous adress. You make the second pointer scan. Now you find the same adress as your base adress(pointer) (there should be many) and you get the offsets from it.
Now paste the offsets to WaterState. Thats it, all should be working now.
Getting the choco lava and plasma is very easy. The offset for choco is the exact same EXCEPT the last offset, like in my offsets :
StateWaterOffset=0x68+0xF4+0x6C+0xCC+0x74+0x798
StateChocoOffset=0x68+0xF4+0x6C+0xCC+0x74+0xA00
What I did to find the last choco offset is take the 798 part from Water, and add 268. The result is A00 and its working. If it wont work then just try adding or substracting one of those; 268, 26C or 4D0.
Then you do it for the rest. Same method works for both StateOffset and Offset. Just remember to start with STATE first, so you know if the offsets as right, as the bot will indicate the liquid type.
Pointer(base adress) is the adress for fishing. Just fishing. To scan for it you just search for 1 when fishing and for 0 when not fishing.
WaterStateOffset = fishing IN WATER
WaterOffset = Bait caught IN WATER
After you found the base adress 2 times, and after you made the second pointer scan, you can select probably any adress. Thats your base adress(pointer).
The fact that you were scanning IN WATER lets you get the STATE offset values. So basically after you make the second pointer scan you result in having the base adress (pointer) and the WaterStateOffset.
At this point, when you paste the Pointer and WaterStateOffset in the config, the bot should indicate that the liquid type is Water (at least in nippys fishbot). If it says unknown, you could try selecting a different base adress and offsets from the second scan.
The last thing you need is the WaterOffset. To get it you scan for 1 in cheat engine when the bait is caught and scan for 0 when its not(could be even fishing).
You do the exact same thing as with the previous adress. You make the second pointer scan. Now you find the same adress as your base adress(pointer) (there should be many) and you get the offsets from it.
Now paste the offsets to WaterState. Thats it, all should be working now.
Getting the choco lava and plasma is very easy. The offset for choco is the exact same EXCEPT the last offset, like in my offsets :
StateWaterOffset=0x68+0xF4+0x6C+0xCC+0x74+0x798
StateChocoOffset=0x68+0xF4+0x6C+0xCC+0x74+0xA00
What I did to find the last choco offset is take the 798 part from Water, and add 268. The result is A00 and its working. If it wont work then just try adding or substracting one of those; 268, 26C or 4D0.
Then you do it for the rest. Same method works for both StateOffset and Offset. Just remember to start with STATE first, so you know if the offsets as right, as the bot will indicate the liquid type.
0x00FD691C
can nolonger get nippy's to function
get error code when using nippy's : Error: 0x80072EE2
there is an ------> at line 1235:return
there is an ------> at line 1235:return
still no reply
Originally Posted by danialjackson
still no reply
Did anyone know how to get from lava to plasma i tried all + 268 26C 4D0 and - 268 26C 4D0 but i dont get the plasma to work
the bot says to plasma = Lava
the bot says to plasma = Lava
pointer trove bot
hello it's possible to update the pointer pleas. I tried i was not successful thx
Alguém tem os ponteiros atualizados atualizados
Similar Threads
Trove Coding & ResourcesFishing Pointer Update(10/06/2015)
4 Trove Coding & ResourcesFishing Pointer Update(10/07/2015) 1 Trove Coding & ResourcesFishing Pointer Update [09/10/2015] All liquidsFU 1 Trove Coding & ResourcesFishing Pointer Update(10/013/2015) 10 Trove Coding & ResourcesFishing Pointer Update(10/15/2015) 3
4 Trove Coding & ResourcesFishing Pointer Update(10/07/2015) 1 Trove Coding & ResourcesFishing Pointer Update [09/10/2015] All liquidsFU 1 Trove Coding & ResourcesFishing Pointer Update(10/013/2015) 10 Trove Coding & ResourcesFishing Pointer Update(10/15/2015) 3