God Mode

Posts 1–15 of 18 · Page 1 of 2

God Mode

After one year i try again to use this code for god mode and it dont need to work

Code:

if (MenuItem[9] == 1)
		{
			static uint32_t addresses[] =
			{
				0xF60C1C, 0xF42C4C, 0xF42C40, 0xF42B78, 0xF60C24,
				0xF42C30, 0xF42C20, 0xF42B68, 0xF42B94, 0xF42C10,
				0xF42C00, 0xF42B58, 0xF60C10, 0xF42B40, 0xF50E10,
				0xF50E08, 0xEDAF00
			};

			for (uint32_t i = 0; i < sizeof(addresses) / sizeof(uint32_t); i++)
			{
				InvalidateString(reinterpret_cast<char*>(cshell_base1 + addresses[i]));
			}

			
			OverwriteString(reinterpret_cast<char*>(cshell_base1 + 0xEDAEE4), "M-c-SBdown_d", 12);
		}

i think the problem form "M-idle" Adress it this true ?

Code:

 CPU Disasm
Address   Hex dump          Command                                  Comments
1078908A  |.  68 E4AEED10   PUSH 10EDAEE4                            ; ASCII "m-idle"
1078908F  |.  51            PUSH ECX                                 ; /Arg1
10789090  |.  FFD7          CALL EDI                                 ; \comctl32.5807725B
10789092  |.  83C4 0C       ADD ESP,0C
10789095  |.  85C0          TEST EAX,EAX
10789097  |.  74 15         JZ SHORT 107890AE
10789099  |.  6A 04         PUSH 4
1078909B  |.  8D5424 14     LEA EDX,[ESP+14]

====================

@mamo007 @gaerGAERHGaerherh @(Virus) @[K]akashi @CaiozinhoFC1 @jayjay153 @DaRk

Originally Posted by Mero203512

After one year i try again to use this code for god mode and it dont need to work

Code:

if (MenuItem[9] == 1)
		{
			static uint32_t addresses[] =
			{
				0xF60C1C, 0xF42C4C, 0xF42C40, 0xF42B78, 0xF60C24,
				0xF42C30, 0xF42C20, 0xF42B68, 0xF42B94, 0xF42C10,
				0xF42C00, 0xF42B58, 0xF60C10, 0xF42B40, 0xF50E10,
				0xF50E08, 0xEDAF00
			};

			for (uint32_t i = 0; i < sizeof(addresses) / sizeof(uint32_t); i++)
			{
				InvalidateString(reinterpret_cast<char*>(cshell_base1 + addresses[i]));
			}

			
			OverwriteString(reinterpret_cast<char*>(cshell_base1 + 0xEDAEE4), "M-c-SBdown_d", 12);
		}

i think the problem form "M-idle" Adress it this true ?

Code:

 CPU Disasm
Address   Hex dump          Command                                  Comments
1078908A  |.  68 E4AEED10   PUSH 10EDAEE4                            ; ASCII "m-idle"
1078908F  |.  51            PUSH ECX                                 ; /Arg1
10789090  |.  FFD7          CALL EDI                                 ; \comctl32.5807725B
10789092  |.  83C4 0C       ADD ESP,0C
10789095  |.  85C0          TEST EAX,EAX
10789097  |.  74 15         JZ SHORT 107890AE
10789099  |.  6A 04         PUSH 4
1078909B  |.  8D5424 14     LEA EDX,[ESP+14]

====================

@mamo007 @gaerGAERHGaerherh @(Virus) @[K]akashi @CaiozinhoFC1 @jayjay153 @DaRk

this will likely give you client errors... why don't you use LTModel's vTable?

Originally Posted by vaisefud3

this will likely give you client errors... why don't you use LTModel's vTable?

The problem is that it does not work at this time with me, and in the past it was not showing me any errors while playing except 19_1 sometimes

well i did this and works fine and that you got addr or strings are wrong you should find the bigger one like M-Idle not m-idle

Code:

char *txt22 = "M-HEBdown_d";
this->OverwriteString(reinterpret_cast<char*>(CShell + ADDR_M_IDLE_1), txt22, strlen(txt22));

Originally Posted by MemoryThePast

well i did this and works fine and that you got addr or strings are wrong you should find the bigger one like M-Idle not m-idle

Code:

char *txt22 = "M-HEBdown_d";
this->OverwriteString(reinterpret_cast<char*>(CShell + ADDR_M_IDLE_1), txt22, strlen(txt22));

i think so it too , but i didn't find it

Originally Posted by MemoryThePast

well i did this and works fine and that you got addr or strings are wrong you should find the bigger one like M-Idle not m-idle

Code:

char *txt22 = "M-HEBdown_d";
this->OverwriteString(reinterpret_cast<char*>(CShell + ADDR_M_IDLE_1), txt22, strlen(txt22));

is this true ? i try it and didn't work too [0x297E44]

Code:

Address   Hex dump          Command                                  Comments
10C4810D  |.  68 447E2911   PUSH 11297E44                            ; ASCII "M-Idle"

Originally Posted by Mero203512

is this true ? i try it and didn't work too [0x297E44]

Code:

Address   Hex dump          Command                                  Comments
10C4810D  |.  68 447E2911   PUSH 11297E44                            ; ASCII "M-Idle"

actually i use 3 addr of M-Idle btw we are not same the code but i think that code are still work

Originally Posted by Mero203512

is this true ? i try it and didn't work too [0x297E44]

Code:

Address   Hex dump          Command                                  Comments
10C4810D  |.  68 447E2911   PUSH 11297E44                            ; ASCII "M-Idle"

i think address is 0xC4810D try to use this

- - - Updated - - -

Originally Posted by MemoryThePast

actually i use 3 addr of M-Idle btw we are not same the code but i think that code are still work

i have your own code

Originally Posted by TheG2ek

i think address is 0xC4810D try to use this

- - - Updated - - -

i have your own code

well show me if that code is same on mine

- - - Updated - - -

Originally Posted by TheG2ek

i think address is 0xC4810D try to use this

- - - Updated - - -

i have your own code

and that addr he got he have a missing 1 addr you should get like this 0x1297E44 not 0x297E44

[I]

Originally Posted by Mero203512

After one year i try again to use this code for god mode and it dont need to work

Code:

if (MenuItem[9] == 1) { static uint32_t addresses[] = { 0xF60C1C, 0xF42C4C, 0xF42C40, 0xF42B78, 0xF60C24, 0xF42C30, 0xF42C20, 0xF42B68, 0xF42B94, 0xF42C10, 0xF42C00, 0xF42B58, 0xF60C10, 0xF42B40, 0xF50E10, 0xF50E08, 0xEDAF00 }; for (uint32_t i = 0; i < sizeof(addresses) / sizeof(uint32_t); i++) { InvalidateString(reinterpret_cast<char*>(cshell_base1 + addresses)); } OverwriteString(reinterpret_cast<char*>(cshell_base1 + 0xEDAEE4), "M-c-SBdown_d", 12); }

i think the problem form "M-idle" Adress it this true ?

Code:

CPU Disasm Address Hex dump Command Comments 1078908A |. 68 E4AEED10 PUSH 10EDAEE4 ; ASCII "m-idle" 1078908F |. 51 PUSH ECX ; /Arg1 10789090 |. FFD7 CALL EDI ; \comctl32.5807725B 10789092 |. 83C4 0C ADD ESP,0C 10789095 |. 85C0 TEST EAX,EAX 10789097 |. 74 15 JZ SHORT 107890AE 10789099 |. 6A 04 PUSH 4 1078909B |. 8D5424 14 LEA EDX,[ESP+14] ====================

@mamo007 @gaerGAERHGaerherh @(Virus) @[K]akashi @CaiozinhoFC1 @jayjay153 @DaRk

Sorry for late
I appricate ur mention
Solved?

Originally Posted by (Virus)

Sorry for late
I appricate ur mention
Solved?

no bro , we are used another code

Yes, you’re using wrong addresses.

Originally Posted by mamo007

Yes, you’re using wrong addresses.

i try to search the strings which i use from one year later and use there new adress

- - - Updated - - -

Originally Posted by (Virus)

Ana b2olk 7lethaa bt2oly bnst5dm code tany !!...

solved by using anthor code with more strings
do you have undetected NBD ?
My old codes one of them detected and the anthor give me cf error

Originally Posted by Mero203512

i try to search the strings which i use from one year later and use there new adress

- - - Updated - - -

solved by using anthor code with more strings
do you have undetected NBD ?
My old codes one of them detected and the anthor give me cf error

As i see u solve it with my code...
Btw nbd is patched try using overwrite string or the one posted from a long ago.