X-Trap = No More?

Posts 1–15 of 16 · Page 1 of 2
X-Trap = No More?
Basically this method of bypassing x-trap is pretty retarded but it can work.
I came up with this - out of anger - while trying to load up one my super special secret programs , and it got blasted by x-trap. Now I am going to devote my time to trying to get rid of this smelly piece of dung that some call security software.

What do we know?

(1) Well, X-trap runs itself from the crossfire >> X-trap folder. And every time the game patcher loads it re-loads all of the files in that folder back into place down to the last kilobyte.

(2) When you click on the crossfire icon to play the game (open up task manager and look at the processes) g4box.exe loads, then hgw game watcher, then the dastardly retarded Xtrap.xt process .

(3) Next, the auto patcher runs and basically resets everything back into place and finally the game will load.

================================================== =======
How to con X-Trap good!

(1)You can't simply end Xtrap.xt using the task manager or command promt because supposedly "access is denied " (I'll figure out a way around this soon enough). So Download this free program called process explorer: (it is basically a form of the task manager except it gives you more options, its not a virus - it is a Microsoft technical add-on, there is only 3 files it installs on your comp - Eula.txt , procexp.chm, and procexp.exe ) here is the url: Process Explorer

(2) You will notice that the program itself is blocked by X-trap (after your finished using this program close it immediately before you resume or restart crossfire.exe process/Xtrap.xt process . So here is what you need to do . Be ready with process explorer open and look at all the programs running. Open crossfire and click start game

(3) Quickly (and I mean quickly) look for when both the crossfire.exe process and the XTrap.xt process are running then immediately right click on crossfire.exe and hit suspend, then hit suspend on Xtrap.xt, and hgw game watcher.

(4) Now you will have time to asses your current situation. You can try to inject a hack or open up a program right about now if your timing was right.

(5) Alright, this is were many will start to run into problems. So I can't guarantee you anything will work. I am still experimenting at this point but I think you should right click on crossfire.exe (in the process explorer) and hit restart followed by yes. Did it work? If no, try quickly restarting crossfire.exe process, then restarting Xtrap.xt process and close process explorer. Or you could try many other things at this point.

Sorry to leave you with a poor conclusion but this is all I have at the moment. So try this stuff out and see if it will work for you .
going to cmd and typing taskkill /IM xtrap.xt works

but because you cant end it before everything else is loaded its useless.
thx for the info apeplus, but it seems that taskkill is not recognized as an operable command for my command prompt for this reason I stated that I could'nt end the process with my command promt in the guide.
Quote Originally Posted by domer View Post
thx for the info apeplus, but it seems that taskkill is not recognized as an operable command for my command prompt for this reason I stated that I could'nt end the process with my command promt in the guide.
taskkill only works in win7, win vista and win xp pro. For xp home u need to download it
Hm looking for freedom yes?

lol, i you bring XTrap to crash, crossfire crashes too
not sure this works or even comes close to working you need xtrap to run crossfire, no xtrap no crossfire. when you try this it will just crash crossfire from my experience. if you do get it to work nice but i highly doubt you will get it.
lol
Quote Originally Posted by domer View Post
Basically this method of bypassing x-trap is pretty retarded but it can work.
I came up with this - out of anger - while trying to load up one my super special secret programs , and it got blasted by x-trap. Now I am going to devote my time to trying to get rid of this smelly piece of dung that some call security software.

What do we know?

(1) Well, X-trap runs itself from the crossfire >> X-trap folder. And every time the game patcher loads it re-loads all of the files in that folder back into place down to the last kilobyte.

(2) When you click on the crossfire icon to play the game (open up task manager and look at the processes) g4box.exe loads, then hgw game watcher, then the dastardly retarded Xtrap.xt process .

(3) Next, the auto patcher runs and basically resets everything back into place and finally the game will load.

================================================== =======
How to con X-Trap good!

(1)You can't simply end Xtrap.xt using the task manager or command promt because supposedly "access is denied " (I'll figure out a way around this soon enough). So Download this free program called process explorer: (it is basically a form of the task manager except it gives you more options, its not a virus - it is a Microsoft technical add-on, there is only 3 files it installs on your comp - Eula.txt , procexp.chm, and procexp.exe ) here is the url: Process Explorer

(2) You will notice that the program itself is blocked by X-trap (after your finished using this program close it immediately before you resume or restart crossfire.exe process/Xtrap.xt process . So here is what you need to do . Be ready with process explorer open and look at all the programs running. Open crossfire and click start game

(3) Quickly (and I mean quickly) look for when both the crossfire.exe process and the XTrap.xt process are running then immediately right click on crossfire.exe and hit suspend, then hit suspend on Xtrap.xt, and hgw game watcher.

(4) Now you will have time to asses your current situation. You can try to inject a hack or open up a program right about now if your timing was right.

(5) Alright, this is were many will start to run into problems. So I can't guarantee you anything will work. I am still experimenting at this point but I think you should right click on crossfire.exe (in the process explorer) and hit restart followed by yes. Did it work? If no, try quickly restarting crossfire.exe process, then restarting Xtrap.xt process and close process explorer. Or you could try many other things at this point.

Sorry to leave you with a poor conclusion but this is all I have at the moment. So try this stuff out and see if it will work for you .
listen if i can get my hand and hacks that made in 2010 i can bypass Xtrap.i already bypass xtrap but i need hack someone help me and i will share bypass with them
a way to possebly bypass its is like making him send a message of everything working just fine when we hacking the shit out of it ;P

sweet dreamz xD
Quote Originally Posted by Lenda12 View Post
a way to possebly bypass its is like making him send a message of everything working just fine when we hacking the shit out of it ;P

sweet dreamz xD
shorten ur sig... But its nice
Didn't work on vista 32 bit...

FUCCK 32 BIT
Dude T.T you watched my video huh or you saw my post give me credit for this method i can prove i came up with it so Creds please
Quote Originally Posted by cpepablito View Post
Dude T.T you watched my video huh or you saw my post give me credit for this method i can prove i came up with it so Creds please
fck you dude i posted this thing i don't even know how long ago on this forum... go back like 40-50 pages and you might find it
hmm, it seems that I have looked around and found out that couple of people have already come up with this method. That was pretty stupid. Oh well, I guess credit to them so I don't get in trouble. Whoever wants credit can take it - I don't give a sh*it - Im just trying to find out how to get past x-trap and then post the results on here so everyone can get by with it. I don't care who did what as long as it works and I can steal it.
its like strap and cf are bff, if u kill one, the other autodestructs
Posts 1–15 of 16 · Page 1 of 2
This thread is closed for replies.

Similar Threads

Talk with us