[HELP] Source code mess up?
[HELP] Source code mess up?
Ok... So basically, I was programming a hack, and when I built it, it said it was successful 
but when it came down to using it, I could only use the chams... Now I put FPS, speed, and hover in the hotkeys... Now I don't know if I am doing this correctly or not but this is what I did for say.. Number pad 3 hack for whatever
and the start of my hack goes like this
then the code for my hacks :P I don't wanna FULLY release it but still... Could someone tell me where I went wrong? And PLEASE tell me if there is a better sleep timer
but when it came down to using it, I could only use the chams... Now I put FPS, speed, and hover in the hotkeys... Now I don't know if I am doing this correctly or not but this is what I did for say.. Number pad 3 hack for whateverCode:
//I declared for speed the "bool speed = false" already as I will display later
if(GetAsyncKeyState(VK_NUMPAD3)<0)
{
if(speed)
{
PushToConsole ("BaseMoveAccel 3000.000000");
PushToConsole ("StartAccel 500.000000");
PushToConsole ("MaxAccel 3000.000000");
PushToConsole ("AccelInc 6000.000000");
PushToConsole ("WalkVel 70.000000") ;
PushToConsole ("FRunVel 285.000000");
PushToConsole ("BRunVel 285.000000");
PushToConsole ("SRunVel 285.000000");
PushToConsole ("DuckVel 50.000000");
speed = 0;
}
else
{
PushToConsole ("BaseMoveAccel 3000.000000");
PushToConsole ("StartAccel 3000.000000");
PushToConsole ("MaxAccel 3000.000000");
PushToConsole ("AccelInc 3000.000000");
PushToConsole ("FRunVel 3000.000000");
PushToConsole ("BRunVel 3000.000000");
PushToConsole ("SRunVel 30000.000000");
PushToConsole ("DuckVel 3000.000000");
speed = 1;
}
Code:
void main()
{
while (!IsGameReadyForHook()){
Sleep(20);
}
bool NxChams = false;
bool Fps = false;
bool speed = false;
bool hover = false;
while (true)
Dam, this is wrong. Learn C++, thats what i'm doing 
Originally Posted by Beatz
Dam, this is wrong. Learn C++, thats what i'm doing
Originally Posted by jonnyboy9985
Excuse me what? How am I wrong? Can you atleast help me instead of just like you know... Just saying "This is wrong" and I am learning C++ and this is practice. Btw if this was a failed attempt at raising your postcount, you are doing really good xD
Btw I Dont think Source Code Section If For This Kinda help Anymore...
Read The New rules
Read The New rules
didnt you forget the speed = false and after speed = true? 
Originally Posted by ®Jack
didnt you forget the speed = false and after speed = true?
Originally Posted by jonnyboy9985
In this case I used 0 as false and 1 as true, since it will have the same effect
Originally Posted by ®Jack
didnt you forget the speed = false and after speed = true?
Any number but 0 can = true & 0 = false
Can someone please help me?
Originally Posted by jonnyboy9985
Ok... So basically, I was programming a hack, and when I built it, it said it was successful but when it came down to using it, I could only use the chams... Now I put FPS, speed, and hover in the hotkeys... Now I don't know if I am doing this correctly or not but this is what I did for say.. Number pad 3 hack for whatever
and the start of my hack goes like this
then the code for my hacks :P I don't wanna FULLY release it but still... Could someone tell me where I went wrong? And PLEASE tell me if there is a better sleep timer
but when it came down to using it, I could only use the chams... Now I put FPS, speed, and hover in the hotkeys... Now I don't know if I am doing this correctly or not but this is what I did for say.. Number pad 3 hack for whateverCode:
//I declared for speed the "bool speed = false" already as I will display later
if(GetAsyncKeyState(VK_NUMPAD3)<0)
{
if(speed)
{
PushToConsole ("BaseMoveAccel 3000.000000");
PushToConsole ("StartAccel 500.000000");
PushToConsole ("MaxAccel 3000.000000");
PushToConsole ("AccelInc 6000.000000");
PushToConsole ("WalkVel 70.000000") ;
PushToConsole ("FRunVel 285.000000");
PushToConsole ("BRunVel 285.000000");
PushToConsole ("SRunVel 285.000000");
PushToConsole ("DuckVel 50.000000");
speed = 0;
}
else
{
PushToConsole ("BaseMoveAccel 3000.000000");
PushToConsole ("StartAccel 3000.000000");
PushToConsole ("MaxAccel 3000.000000");
PushToConsole ("AccelInc 3000.000000");
PushToConsole ("FRunVel 3000.000000");
PushToConsole ("BRunVel 3000.000000");
PushToConsole ("SRunVel 30000.000000");
PushToConsole ("DuckVel 3000.000000");
speed = 1;
}
Code:
void main()
{
while (!IsGameReadyForHook()){
Sleep(20);
}
bool NxChams = false;
bool Fps = false;
bool speed = false;
bool hover = false;
while (true)
should be as follows:
Code:
if(GetAsyncKeyState(VK_NUMPAD3)<0)
{
speed = !speed;
if(speed)
{
//your code;
}
else
{
//more code;
}
}
Originally Posted by Frit0
should be as follows:
Code:
if(GetAsyncKeyState(VK_NUMPAD3)<0)
{
speed = !speed;
if(speed)
{
//your code;
}
else
{
//more code;
}
}
That would make speed = false every time he pressed the hotkey.
Your missing a '}' at the end of your else statement.
Originally Posted by Injection
That would make speed = false every time he pressed the hotkey.
Your missing a '}' at the end of your else statement.
Originally Posted by Frit0
The variable "speed" will equal the opposite of its current value, also everything is correctly written.
Stop coding T___T
This thread is closed for replies.
