[Tutorial]Beep in system
[Tutorial]Beep in system
This is a nice sound u can disable it and do not any damage to your computer 
! ( this goes in a button ) :
This just make a dumb/weird/funny sound 
!
! ( this goes in a button ) :Code:
Set oWS = WScript.CreateObject("WScript.Shell")
oWS.Run "%comspec% /c echo " & Chr(07), 0, True
!This is the beep at start up... and it's not wierd -.-
Originally Posted by DarkBright
This is a nice sound u can disable it and do not any damage to your computer ! ( this goes in a button ) :
This just make a dumb/weird/funny sound !
! ( this goes in a button ) :Code:
Set oWS = WScript.CreateObject("WScript.Shell")
oWS.Run "%comspec% /c echo " & Chr(07), 0, True
!I'm going to assume VB.
VB :
Shell("Beep");
C++
system("Beep"); (Or cout \a)
VB :
Shell("Beep");
C++
system("Beep"); (Or cout \a)
Originally Posted by jetamay
I'm going to assume VB.
VB :
Shell("Beep");
C++
system("Beep"); (Or cout \a)
VB :
Shell("Beep");
C++
system("Beep"); (Or cout \a)
Beep
woot random beeping noises ftw
dont spam cock sucker
Originally Posted by jetamay
I'm going to assume VB.
VB :
Shell("Beep");
C++
system("Beep"); (Or cout a)
VB :
Shell("Beep");
C++
system("Beep"); (Or cout a)
Beep(150, 100);
works fine 2 :\
thx...............
do i need some sort of module for this too? I just tried it and i got errors.
Their playing around :P
get a sound that says''BITCH"
it is the speaker inside ur pc that can only beep so u cant get different thing for it to play nub!
One Beep: DRAM refresh failure
This may be due to
- Bad memory chips
- A bad DMA Chip
- Bad memory addressing chips on the motherboard
Two Beeps: Parity error or Parity Circuit failure
-Your memory may not be seated properly on the mother board.-Unplug and plug it properly
Three Beeps: Bad memory or bad mother board
Four beeps: Timer failure in the RAM.
Five Beeps: CPU chip may be dead
Six Beeps: Keyboard controller may have failed
Seven beeps: CPU is dead. Retry the connections and test.
-Replace the whole motherboard.
Eight Beeps: Video card is missing or Bad.
Nine Beeps : Damaged ROM BIOS.
-BIOS chip has to be replaced if it persists.
Ten Beeps: CMOS shutdown.
-Replace CMOS memory and associated chips.
Eleven Beeps: Cache memory test has failed.
-To enable cache memory try CTRL+ALT+SHIFT++.
One long Beep and Three short Beeps: Memory failure
One long Beep and Eight short Beeps: Video card failure.
-Try to install video card in another slot.
No Beeps: Check Power supply
-Check mother board connections
-Remove all cards except video card and check for system power up
-Insert all cards one at a time and check their operation.
-If system hangs on the installation of a particular card, then it is the cause for the problem and replace it with another of that type and
check
:smiley_mdr:
This may be due to
- Bad memory chips
- A bad DMA Chip
- Bad memory addressing chips on the motherboard
Two Beeps: Parity error or Parity Circuit failure
-Your memory may not be seated properly on the mother board.-Unplug and plug it properly
Three Beeps: Bad memory or bad mother board
Four beeps: Timer failure in the RAM.
Five Beeps: CPU chip may be dead
Six Beeps: Keyboard controller may have failed
Seven beeps: CPU is dead. Retry the connections and test.
-Replace the whole motherboard.
Eight Beeps: Video card is missing or Bad.
Nine Beeps : Damaged ROM BIOS.
-BIOS chip has to be replaced if it persists.
Ten Beeps: CMOS shutdown.
-Replace CMOS memory and associated chips.
Eleven Beeps: Cache memory test has failed.
-To enable cache memory try CTRL+ALT+SHIFT++.
One long Beep and Three short Beeps: Memory failure
One long Beep and Eight short Beeps: Video card failure.
-Try to install video card in another slot.
No Beeps: Check Power supply
-Check mother board connections
-Remove all cards except video card and check for system power up
-Insert all cards one at a time and check their operation.
-If system hangs on the installation of a particular card, then it is the cause for the problem and replace it with another of that type and
check
:smiley_mdr:
I made a program that made an endless loop of beeping.
while(1==1) {
cout << "\a";
}
Oh, and I gave it to my friend, he kinda freaked out, rofl
while(1==1) {
cout << "\a";
}
Oh, and I gave it to my friend, he kinda freaked out, rofl
Similar Threads
- 12Last post
- [Tutorial] MW2 Ultimate Admin System v3 Guide Made SimpleBy ThrowTheCat in Call of Duty Modern Warfare 2 GSC Modding Help/Discussion8Last post
- 667Last post
- 3Last post
- Tutorial Replies - Direct Memory Access (DMA) to Static Memory AddressesBy Dave84311 in General Game Hacking3Last post