WPE Tutorial! [Noobs Read]
WPE Tutorial! [Noobs Read]
Step 1
Hexadecimal, unlike our normal decimal system, is based off the powers of sixteen. Decimal, our normal number system, is based off the powers of ten. For example, every digit you go across on a decimal system multiplies the previous base number by ten.
1, 10, 100, 1000, 10000, 100000, 1000000
The Hexadecimal system instead goes by the powers of 16.
1, 16, 256, etc
Where the decimal system has 0-9 for the amount of a base number, the hex system has 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F where 0 is 0 (duh) and F is 15.
Now for hexadecimal numbers. A hexadecimal number will look like this: 1B 2F 30. Each 2 digits are separated by a space. Now can you convert that number to decimal? the number is the base number (1, 16, 256, etc) multiplied by the amount (0-9,A-F). Convert using multiplication, and you get a nice round decimal.
Step 2
Packets are what is sent from one computer to another in terms of data. They are used for various purposes, such as pinging and telling the computer what happened. The gist of this is you can edit packets to conform to your values.
In this I will assume you know basic hexadecimal.
1.) Download a packet editing program (I use WPE Pro)
2.) Start it up after installation.
3.) Open up a program with access to the internet (IExplorer is good)
4.) Go to select process in the program, and select the program you want to monitor.
5.) Press the monitor button to record packets sent to and out of your computer.
6.) Stop after a little while, and view the packet log.
Here is the tedious part. You have to search through the packet log for packets with similar values, but that are different in a few ways. For example, I could have two packets that say:
00 2A 56 00
00 2A 42 01
Now these packets are very similar. If I wanted to make it so I would change the 56 packet to the 42 packet, I would create a filter. In the filter I would have the values to be searched for, and the values that are modified. After that I would enable the filter and set the program to monitor. That makes it so any packets coming into or going out of my computer are changed to the value I wanted.
Hexadecimal, unlike our normal decimal system, is based off the powers of sixteen. Decimal, our normal number system, is based off the powers of ten. For example, every digit you go across on a decimal system multiplies the previous base number by ten.
1, 10, 100, 1000, 10000, 100000, 1000000
The Hexadecimal system instead goes by the powers of 16.
1, 16, 256, etc
Where the decimal system has 0-9 for the amount of a base number, the hex system has 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F where 0 is 0 (duh) and F is 15.
Now for hexadecimal numbers. A hexadecimal number will look like this: 1B 2F 30. Each 2 digits are separated by a space. Now can you convert that number to decimal? the number is the base number (1, 16, 256, etc) multiplied by the amount (0-9,A-F). Convert using multiplication, and you get a nice round decimal.
Step 2
Packets are what is sent from one computer to another in terms of data. They are used for various purposes, such as pinging and telling the computer what happened. The gist of this is you can edit packets to conform to your values.
In this I will assume you know basic hexadecimal.
1.) Download a packet editing program (I use WPE Pro)
2.) Start it up after installation.
3.) Open up a program with access to the internet (IExplorer is good)
4.) Go to select process in the program, and select the program you want to monitor.
5.) Press the monitor button to record packets sent to and out of your computer.
6.) Stop after a little while, and view the packet log.
Here is the tedious part. You have to search through the packet log for packets with similar values, but that are different in a few ways. For example, I could have two packets that say:
00 2A 56 00
00 2A 42 01
Now these packets are very similar. If I wanted to make it so I would change the 56 packet to the 42 packet, I would create a filter. In the filter I would have the values to be searched for, and the values that are modified. After that I would enable the filter and set the program to monitor. That makes it so any packets coming into or going out of my computer are changed to the value I wanted.
how stupid are u half the peopl here dont understnad that this is not tut SPAM!!!!!
Originally Posted by nighthawk3
how stupid are u half the peopl here dont understnad that this is not tut SPAM!!!!!
Originally Posted by nighthawk3
how stupid are u half the peopl here dont understnad that this is not tut SPAM!!!!!
Next, I spent about 10 mins writing this, so how can this hardly be called spam? To be honest I think your post is the real spam.
Originally Posted by megaspeek
wow. first let me say that you don't understand it, so how about actually reading it? If you can't understand it then please go visit your 5th grade math teacher and bitch at her? Ok?
Next, I spent about 10 mins writing this, so how can this hardly be called spam? To be honest I think your post is the real spam.
Next, I spent about 10 mins writing this, so how can this hardly be called spam? To be honest I think your post is the real spam.
This is Common Sense, But has nothing to do with SENDING packets.
Originally Posted by jerry0
This is Common Sense, But has nothing to do with SENDING packets.
sending packets is different for each different packet program
You didn't write this, you googled 'WPE Tutorial' and clicked the first link.
Originally Posted by MortalDefiance
You didn't write this, you googled 'WPE Tutorial' and clicked the first link.
good tip you your windows calculator to convert to Hex
just change your calculator to Scientific mode under view
just change your calculator to Scientific mode under view
where can i clcik monitor :\ pics plz ^^
This tutorial doesnt even finish really.
All it does is explain how it works, not how to use it >_>
Useless topic because its not even a tutorial...
All it does is explain how it works, not how to use it >_>
Useless topic because its not even a tutorial...
lolpppppppp
2121212222222
21212121222222222222221212121212121
why not show a tut on how to use this FOR combat arms not for iexplorer or wateva
this is a Combat arms section
so right now i believe ur post is a spam
because it has nothing to do with CA
this is a Combat arms section
so right now i believe ur post is a spam
because it has nothing to do with CA
This thread is closed for replies.
